(ntoskrnl/io/iomgr/file.c:438) Using IopParseDevice() hack. Requested invalid attributes: 11f
(lib/fslib/vfatlib/vfatlib.c:210) WARNING: Failed to lock volume for formatting! Format may fail! (Status: 0xc0000010)
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: TopLevel, qd=0
Send to device 2a
TopLevel (2), srb 0xb0f69238
TopLevel (3), AtaReq 0xb11d8000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf7866994
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x45, data f7822528, count 200, lCh 0, dev 0
  get Phys(PRD=b11d8060)
  get Phys(data[0]=f7822528)
  set TERM
AtapiDmaSetup: OK
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xca, lba 0x3f count 0x1 feature 0x0
  Status 0x0
AtapiDmaStart: write on 0x0:0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x51
  base status 0x51
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x51)
AtapiInterrupt: Error 0x84
  Bad Lba 0x3f
  wait 100 ready after IDE error
  Intr on DRQ 0
Errors in DMA mode
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d59f4
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (45 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x45
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
IDE_STATUS_ERROR detected on entry, statusByte = 0x51
Setup chip a:w:u=4:-1:-1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
  Status 0x50
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 0 vs 0
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1 vs 0
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2 vs 0
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 3 vs 0
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 4 vs 0
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: already setup, 1 entries
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 5 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 6 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 7 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 8 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 9 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 10 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 11 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 12 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 13 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 14 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 15 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 16 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 17 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 18 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 19 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 20 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 21 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 22 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 23 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 24 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 25 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 26 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 27 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 28 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 29 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 30 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 31 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 32 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 33 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 34 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 35 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 36 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 37 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 38 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 39 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 40 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 41 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 42 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 43 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 44 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 45 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 46 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 47 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 48 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 49 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 50 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 51 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 52 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 53 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 54 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 55 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 56 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 57 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 58 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 59 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 60 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 61 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 62 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 63 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 64 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 65 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 66 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 67 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 68 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 69 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 70 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 71 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 72 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 73 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 74 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 75 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 76 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 77 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 78 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 79 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 80 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 81 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 82 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 83 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 84 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 85 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 86 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 87 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 88 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 89 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 90 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 91 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 92 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 93 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 94 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 95 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 96 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 97 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 98 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 99 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 100 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 101 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 102 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 103 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 104 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 105 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 106 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 107 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 108 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 109 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 110 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 111 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 112 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 113 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 114 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 115 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 116 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 117 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 118 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 119 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 120 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 121 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 122 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 123 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 124 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 125 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 126 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 127 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 128 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 129 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 130 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 131 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 132 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 133 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 134 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 135 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 136 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 137 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 138 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 139 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 140 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 141 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 142 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 143 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 144 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 145 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 146 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 147 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 148 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 149 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 150 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 151 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 152 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 153 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 154 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 155 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 156 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 157 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 158 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 159 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 160 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 161 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 162 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 163 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 164 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 165 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 166 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 167 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 168 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 169 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 170 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 171 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 172 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 173 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 174 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 175 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 176 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 177 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 178 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 179 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 180 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 181 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 182 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 183 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 184 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 185 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 186 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 187 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 188 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 189 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 190 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 191 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 192 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 193 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 194 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 195 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 196 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 197 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 198 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 199 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 200 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 201 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 202 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 203 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 204 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 205 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 206 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 207 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 208 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 209 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 210 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 211 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 212 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 213 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 214 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 215 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 216 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 217 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 218 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 219 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 220 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 221 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 222 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 223 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 224 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 225 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 226 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 227 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 228 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 229 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 230 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 231 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 232 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 233 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 234 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 235 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 236 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 237 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 238 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 239 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 240 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 241 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 242 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 243 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 244 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 245 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 246 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 247 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 248 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 249 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 250 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 251 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 252 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 253 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 254 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 255 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 256 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 257 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 258 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 259 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 260 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 261 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 262 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 263 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 264 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 265 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 266 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 267 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 268 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 269 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 270 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 271 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 272 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 273 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 274 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 275 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 276 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 277 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 278 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 279 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 280 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 281 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 282 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 283 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 284 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 285 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 286 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 287 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 288 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 289 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 290 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 291 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 292 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 293 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 294 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 295 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 296 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 297 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 298 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 299 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 300 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 301 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 302 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 303 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 304 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 305 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 306 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 307 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 308 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 309 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 310 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 311 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 312 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 313 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 314 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 315 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 316 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 317 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 318 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 319 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 320 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 321 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 322 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 323 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 324 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 325 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 326 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 327 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 328 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 329 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 330 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 331 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 332 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 333 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 334 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 335 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 336 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 337 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 338 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 339 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 340 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 341 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 342 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 343 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 344 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 345 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 346 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 347 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 348 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 349 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 350 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 351 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 352 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 353 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 354 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 355 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 356 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 357 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 358 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 359 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 360 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 361 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 362 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 363 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 364 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 365 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 366 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 367 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 368 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 369 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 370 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 371 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 372 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 373 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 374 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 375 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 376 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 377 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 378 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 379 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 380 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 381 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 382 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 383 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 384 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 385 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 386 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 387 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 388 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 389 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 390 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 391 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 392 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 393 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 394 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 395 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 396 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 397 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 398 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 399 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 400 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 401 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 402 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 403 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 404 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 405 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 406 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 407 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 408 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 409 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 410 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 411 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 412 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 413 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 414 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 415 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 416 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 417 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 418 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 419 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 420 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 421 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 422 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 423 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 424 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 425 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 426 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 427 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 428 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 429 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 430 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 431 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 432 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 433 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 434 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 435 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 436 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 437 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 438 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 439 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 440 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 441 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 442 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 443 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 444 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 445 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 446 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 447 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 448 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 449 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 450 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 451 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 452 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 453 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 454 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 455 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 456 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 457 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 458 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 459 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 460 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 461 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 462 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 463 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 464 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 465 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 466 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 467 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 468 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 469 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 470 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 471 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 472 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 473 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 474 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 475 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 476 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 477 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 478 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 479 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 480 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 481 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 482 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 483 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 484 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 485 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 486 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 487 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 488 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 489 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 490 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 491 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 492 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 493 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 494 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 495 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 496 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 497 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 498 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 499 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 500 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 501 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 502 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 503 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 504 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 505 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 506 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 507 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 508 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 509 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 510 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 511 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 512 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 513 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 514 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 515 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 516 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 517 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 518 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 519 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 520 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 521 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 522 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 523 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 524 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 525 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 526 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 527 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 528 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 529 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 530 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 531 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 532 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 533 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 534 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 535 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 536 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 537 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 538 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 539 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 540 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 541 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 542 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 543 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 544 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 545 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 546 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 547 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 548 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 549 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 550 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 551 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 552 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 553 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 554 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 555 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 556 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 557 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 558 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 559 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 560 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 561 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 562 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 563 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 564 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 565 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 566 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 567 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 568 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 569 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 570 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 571 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 572 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 573 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 574 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 575 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 576 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 577 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 578 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 579 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 580 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 581 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 582 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 583 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 584 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 585 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 586 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 587 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 588 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 589 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 590 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 591 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 592 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 593 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 594 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 595 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 596 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 597 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 598 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 599 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 600 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 601 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 602 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 603 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 604 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 605 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 606 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 607 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 608 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 609 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 610 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 611 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 612 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 613 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 614 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 615 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 616 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 617 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 618 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 619 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 620 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 621 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 622 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 623 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 624 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 625 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 626 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 627 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 628 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 629 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 630 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 631 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 632 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 633 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 634 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 635 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 636 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 637 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 638 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 639 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 640 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 641 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 642 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 643 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 644 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 645 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 646 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 647 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 648 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 649 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 650 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 651 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 652 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 653 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 654 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 655 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 656 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 657 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 658 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 659 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 660 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 661 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 662 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 663 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 664 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 665 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 666 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 667 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 668 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 669 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 670 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 671 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 672 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 673 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 674 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 675 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 676 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 677 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 678 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 679 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 680 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 681 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 682 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 683 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 684 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 685 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 686 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 687 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 688 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 689 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 690 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 691 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 692 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 693 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 694 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 695 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 696 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 697 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 698 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 699 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 700 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 701 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 702 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 703 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 704 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 705 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 706 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 707 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 708 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 709 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 710 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 711 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 712 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 713 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 714 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 715 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 716 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 717 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 718 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 719 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 720 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 721 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 722 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 723 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 724 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 725 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 726 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 727 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 728 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 729 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 730 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 731 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 732 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 733 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 734 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 735 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 736 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 737 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 738 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 739 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 740 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 741 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 742 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 743 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 744 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 745 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 746 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 747 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 748 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 749 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 750 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 751 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 752 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 753 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 754 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 755 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 756 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 757 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 758 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 759 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 760 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 761 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 762 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 763 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 764 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 765 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 766 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 767 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 768 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 769 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 770 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 771 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 772 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 773 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 774 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 775 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 776 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 777 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 778 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 779 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 780 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 781 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 782 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 783 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 784 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 785 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 786 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 787 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 788 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 789 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 790 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 791 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 792 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 793 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 794 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 795 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 796 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 797 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 798 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 799 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 800 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 801 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 802 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 803 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 804 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 805 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 806 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 807 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 808 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 809 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 810 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 811 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 812 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 813 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 814 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 815 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 816 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 817 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 818 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 819 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 820 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 821 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 822 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 823 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 824 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 825 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 826 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 827 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 828 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 829 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 830 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 831 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 832 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 833 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 834 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 835 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 836 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 837 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 838 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 839 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 840 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 841 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 842 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 843 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 844 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 845 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 846 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 847 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 848 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 849 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 850 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 851 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 852 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 853 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 854 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 855 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 856 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 857 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 858 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 859 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 860 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 861 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 862 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 863 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 864 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 865 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 866 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 867 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 868 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 869 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 870 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 871 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 872 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 873 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 874 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 875 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 876 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 877 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 878 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 879 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 880 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 881 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 882 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 883 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 884 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 885 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 886 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 887 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 888 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 889 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 890 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 891 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 892 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 893 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 894 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 895 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 896 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 897 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 898 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 899 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 900 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 901 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 902 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 903 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 904 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 905 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 906 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 907 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 908 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 909 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 910 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 911 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 912 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 913 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 914 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 915 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 916 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 917 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 918 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 919 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 920 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 921 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 922 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 923 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 924 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 925 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 926 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 927 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 928 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 929 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 930 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 931 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 932 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 933 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 934 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 935 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 936 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 937 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 938 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 939 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 940 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 941 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 942 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 943 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 944 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 945 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 946 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 947 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 948 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 949 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 950 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 951 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 952 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 953 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 954 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 955 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 956 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 957 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 958 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 959 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 960 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 961 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 962 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 963 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 964 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 965 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 966 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 967 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 968 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 969 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 970 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 971 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 972 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 973 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 974 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 975 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 976 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 977 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 978 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 979 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 980 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 981 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 982 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 983 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 984 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 985 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 986 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 987 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 988 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 989 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 990 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 991 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 992 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 993 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 994 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 995 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 996 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 997 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 998 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 999 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1000 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1001 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1002 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1003 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1004 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1005 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1006 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1007 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1008 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1009 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1010 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1011 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1012 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1013 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1014 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1015 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1016 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1017 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1018 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1019 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1020 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1021 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1022 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1023 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1024 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1025 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1026 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1027 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1028 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1029 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1030 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1031 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1032 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1033 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1034 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1035 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1036 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1037 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1038 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1039 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1040 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1041 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1042 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1043 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1044 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1045 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1046 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1047 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1048 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1049 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1050 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1051 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1052 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1053 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1054 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1055 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1056 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1057 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1058 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1059 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1060 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1061 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1062 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1063 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1064 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1065 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1066 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1067 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1068 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1069 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1070 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1071 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1072 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1073 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1074 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1075 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1076 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1077 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1078 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1079 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1080 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1081 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1082 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1083 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1084 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1085 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1086 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1087 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1088 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1089 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1090 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1091 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1092 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1093 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1094 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1095 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1096 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1097 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1098 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1099 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1100 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1101 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1102 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1103 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1104 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1105 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1106 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1107 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1108 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1109 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1110 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1111 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1112 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1113 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1114 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1115 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1116 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1117 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1118 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1119 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1120 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1121 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1122 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1123 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1124 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1125 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1126 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1127 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1128 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1129 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1130 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1131 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1132 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1133 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1134 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1135 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1136 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1137 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1138 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1139 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1140 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1141 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1142 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1143 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1144 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1145 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1146 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1147 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1148 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1149 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1150 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1151 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1152 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1153 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1154 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1155 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1156 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1157 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1158 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1159 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1160 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1161 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1162 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1163 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1164 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1165 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1166 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1167 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1168 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1169 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1170 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1171 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1172 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1173 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1174 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1175 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1176 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1177 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1178 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1179 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1180 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1181 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1182 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1183 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1184 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1185 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1186 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1187 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1188 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1189 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1190 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1191 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1192 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1193 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1194 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1195 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1196 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1197 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1198 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1199 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1200 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1201 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1202 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1203 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1204 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1205 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1206 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1207 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1208 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1209 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1210 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1211 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1212 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1213 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1214 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1215 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1216 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1217 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1218 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1219 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1220 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1221 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1222 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1223 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1224 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1225 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1226 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1227 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1228 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1229 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1230 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1231 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1232 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1233 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1234 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1235 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1236 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1237 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1238 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1239 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1240 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1241 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1242 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1243 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1244 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1245 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1246 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1247 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1248 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1249 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1250 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1251 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1252 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1253 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1254 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1255 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1256 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1257 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1258 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1259 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1260 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1261 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1262 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1263 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1264 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1265 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1266 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1267 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1268 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1269 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1270 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1271 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1272 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1273 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1274 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1275 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1276 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1277 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1278 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1279 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1280 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1281 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1282 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1283 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1284 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1285 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1286 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1287 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1288 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1289 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1290 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1291 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1292 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1293 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1294 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1295 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1296 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1297 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1298 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1299 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1300 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1301 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1302 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1303 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1304 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1305 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1306 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1307 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1308 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1309 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1310 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1311 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1312 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1313 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1314 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1315 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1316 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1317 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1318 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1319 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1320 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1321 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1322 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1323 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1324 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1325 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1326 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1327 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1328 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1329 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1330 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1331 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1332 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1333 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1334 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1335 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1336 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1337 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1338 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1339 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1340 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1341 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1342 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1343 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1344 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1345 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1346 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1347 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1348 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1349 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1350 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1351 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1352 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1353 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1354 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1355 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1356 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1357 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1358 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1359 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1360 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1361 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1362 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1363 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1364 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1365 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1366 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1367 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1368 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1369 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1370 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1371 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1372 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1373 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1374 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1375 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1376 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1377 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1378 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1379 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1380 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1381 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1382 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1383 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1384 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1385 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1386 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1387 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1388 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1389 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1390 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1391 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1392 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1393 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1394 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1395 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1396 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1397 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1398 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1399 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1400 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1401 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1402 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1403 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1404 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1405 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1406 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1407 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1408 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1409 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1410 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1411 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1412 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1413 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1414 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1415 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1416 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1417 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1418 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1419 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1420 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1421 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1422 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1423 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1424 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1425 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1426 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1427 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1428 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1429 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1430 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1431 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1432 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1433 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1434 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1435 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1436 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1437 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1438 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1439 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1440 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1441 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1442 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1443 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1444 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1445 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1446 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1447 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1448 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1449 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1450 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1451 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1452 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1453 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1454 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1455 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1456 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1457 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1458 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1459 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1460 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1461 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1462 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1463 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1464 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1465 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1466 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1467 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1468 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1469 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1470 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1471 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1472 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1473 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1474 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1475 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1476 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1477 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1478 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1479 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1480 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1481 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1482 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1483 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1484 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1485 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1486 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1487 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1488 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1489 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1490 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1491 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1492 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1493 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1494 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1495 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1496 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1497 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1498 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1499 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1500 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1501 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1502 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1503 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1504 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1505 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1506 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1507 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1508 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1509 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1510 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1511 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1512 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1513 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1514 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1515 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1516 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1517 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1518 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1519 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1520 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1521 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1522 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1523 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1524 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1525 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1526 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1527 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1528 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1529 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1530 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1531 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1532 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1533 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1534 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1535 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1536 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1537 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1538 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1539 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1540 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1541 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1542 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1543 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1544 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1545 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1546 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1547 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1548 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1549 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1550 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1551 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1552 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1553 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1554 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1555 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1556 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1557 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1558 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1559 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1560 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1561 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1562 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1563 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1564 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1565 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1566 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1567 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1568 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1569 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1570 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1571 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1572 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1573 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1574 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1575 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1576 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1577 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1578 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1579 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1580 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1581 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1582 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1583 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1584 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1585 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1586 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1587 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1588 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1589 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1590 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1591 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1592 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1593 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1594 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1595 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1596 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1597 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1598 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1599 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1600 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1601 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1602 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1603 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1604 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1605 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1606 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1607 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1608 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1609 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1610 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1611 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1612 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1613 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1614 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1615 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1616 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1617 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1618 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1619 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1620 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1621 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1622 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1623 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1624 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1625 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1626 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1627 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1628 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1629 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1630 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1631 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1632 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1633 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1634 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1635 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1636 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1637 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1638 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1639 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1640 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1641 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1642 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1643 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1644 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1645 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1646 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1647 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1648 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1649 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1650 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1651 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1652 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1653 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1654 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1655 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1656 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1657 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1658 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1659 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1660 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1661 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1662 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1663 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1664 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1665 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1666 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1667 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1668 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1669 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1670 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1671 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1672 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1673 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1674 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1675 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1676 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1677 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1678 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1679 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1680 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1681 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1682 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1683 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1684 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1685 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1686 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1687 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1688 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1689 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1690 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1691 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1692 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1693 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1694 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1695 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1696 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1697 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1698 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1699 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1700 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1701 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1702 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1703 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1704 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1705 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1706 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1707 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1708 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1709 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1710 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1711 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1712 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1713 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1714 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1715 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1716 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1717 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1718 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1719 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1720 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1721 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1722 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1723 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1724 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1725 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1726 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1727 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1728 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1729 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1730 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1731 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1732 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1733 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1734 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1735 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1736 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1737 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1738 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1739 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1740 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1741 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1742 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1743 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1744 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1745 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1746 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1747 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1748 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1749 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1750 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1751 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1752 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1753 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1754 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1755 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1756 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1757 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1758 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1759 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1760 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1761 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1762 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1763 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1764 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1765 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1766 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1767 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1768 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1769 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1770 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1771 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1772 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1773 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1774 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1775 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1776 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1777 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1778 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1779 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1780 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1781 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1782 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1783 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1784 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1785 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1786 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1787 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1788 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1789 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1790 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1791 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1792 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1793 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1794 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1795 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1796 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1797 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1798 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1799 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1800 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1801 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1802 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1803 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1804 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1805 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1806 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1807 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1808 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1809 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1810 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1811 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1812 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1813 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1814 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1815 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1816 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1817 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1818 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1819 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1820 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1821 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1822 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1823 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1824 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1825 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1826 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1827 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1828 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1829 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1830 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1831 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1832 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1833 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1834 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1835 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1836 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1837 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1838 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1839 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1840 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1841 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1842 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1843 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1844 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1845 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1846 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1847 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1848 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1849 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1850 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1851 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1852 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1853 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1854 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1855 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1856 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1857 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1858 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1859 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1860 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1861 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1862 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1863 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1864 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1865 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1866 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1867 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1868 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1869 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1870 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1871 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1872 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1873 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1874 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1875 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1876 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1877 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1878 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1879 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1880 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1881 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1882 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1883 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1884 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1885 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1886 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1887 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1888 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1889 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1890 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1891 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1892 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1893 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1894 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1895 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1896 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1897 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1898 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1899 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1900 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1901 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1902 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1903 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1904 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1905 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1906 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1907 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1908 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1909 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1910 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1911 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1912 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1913 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1914 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1915 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1916 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1917 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1918 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1919 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1920 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1921 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1922 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1923 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1924 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1925 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1926 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1927 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1928 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1929 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1930 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1931 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1932 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1933 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1934 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1935 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1936 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1937 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1938 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1939 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1940 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1941 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1942 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1943 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1944 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1945 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1946 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1947 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1948 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1949 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1950 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1951 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1952 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1953 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1954 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1955 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1956 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1957 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1958 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1959 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1960 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1961 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1962 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1963 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1964 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1965 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1966 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1967 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1968 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1969 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1970 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1971 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1972 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1973 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1974 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1975 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1976 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1977 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1978 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1979 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1980 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1981 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1982 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1983 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1984 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1985 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1986 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1987 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1988 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1989 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1990 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1991 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1992 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1993 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1994 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1995 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1996 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1997 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1998 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 1999 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2000 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2001 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2002 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2003 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2004 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2005 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2006 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2007 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2008 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2009 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2010 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2011 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2012 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2013 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2014 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2015 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2016 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2017 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2018 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2019 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2020 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2021 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2022 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2023 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2024 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2025 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2026 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2027 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2028 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2029 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2030 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2031 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2032 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2033 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2034 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2035 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2036 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2037 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2038 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2039 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2040 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2041 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2042 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2043 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2044 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2045 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2046 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2047 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2048 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2049 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2050 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2051 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2052 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2053 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2054 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2055 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2056 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2057 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2058 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2059 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2060 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2061 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2062 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2063 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2064 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2065 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2066 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2067 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2068 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2069 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2070 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2071 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2072 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2073 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2074 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2075 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2076 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2077 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2078 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2079 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2080 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2081 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2082 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2083 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2084 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2085 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2086 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2087 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2088 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2089 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2090 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2136 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2137 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2138 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2139 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2140 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2141 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2142 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2143 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2144 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2145 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2146 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2147 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2148 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2149 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2150 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2151 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2152 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2153 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2154 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2155 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupv_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2189 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2190 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2191 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2192 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2193 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2194 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2195 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2196 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2197 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2198 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2199 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2200 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2201 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2202 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2203 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2204 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2205 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2206 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2207 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2208 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2209 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2210 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2211 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2212 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2213 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2214 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2215 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2216 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2217 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2218 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2219 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2220 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2221 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2222 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2223 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2224 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2225 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2226 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2227 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2228 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2229 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2230 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2231 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2232 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2233 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2234 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2235 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2236 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2237 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2238 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2239 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2240 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2241 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2242 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2243 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2244 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2245 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2246 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2247 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2248 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
IdeReadWrite: Lba 0x3f, Count 0x1(0x1)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc5, lba 0x3f count 0x1 feature 0x0
IdeReadWrite: Write 0x100 words
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0f69238
AtapiStartIo: query PORT for next request
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=0, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  dev_type IDE
  OldReqState = 40
  service PIO HDD
AtapiInterrupt: Entered with status (0x50)
  operate like in DPC
Some higher mode doesn't work right :((
Recovery stats[1]: 2249 vs 0
Limit transfer rate to c
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
AtapiInterrupt: more I/O required (0 of 200 bytes) -> reenqueue
AtapiInterrupt: NextRequest, srb=0xb0f69238
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0f69238, CDB 0xb0f69268, AtaReq 0xb11d8000, SCmd 0x2a
UniataNeedQueueing: qd=1
Send to device 2a
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0x809d5934
** Ide: Command AtaReq 0xb11d8000
** --- **
IdeSendCommand: SCSIOP_WRITE PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): 