=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.08.15 15:45:03 =~=~=~=~=~=~=~=~=~=~=~= (../../ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20140814-r63837) (../../ntoskrnl/kd/kdio.c:379) 1 System Processor [3069 MB Memory] (../../ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS MININT KDSERIAL (../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(31) \ multi(0)disk(0)cdrom(31) \reactos\ (../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_3DNOW KF_XMMI64 KF_NX_BIT (../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 524288 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 16 (../../ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (../../ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x84400000 Boot Loaded Image (../../ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB14FD000 PFN Database (../../ntoskrnl/mm/mminit.c:268) 0xB14FD000 - 0xB7475000 ARM3 Non Paged Pool (../../ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (../../ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (../../ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (../../ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (../../ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (../../ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (../../ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (../../ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (../../ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB71F9008, 2) is UNIMPLEMENTED! (hal/halx86/legacy/bussupp.c:594) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail! (hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Unknown device [1022:9600] (rev 00) Subsystem: Unknown [1022:9600] Flags: bus master, 66MHz, medium devsel, latency 32 Memory at e0000000 (64-bit, non-prefetchable) [size=512M] 00:02.0 PCI bridge [0604]: Unknown device [1022:9603] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at 00010100 (32-bit, non-prefetchable) [size=256] I/O ports at 2000e1e0 [size=32] Memory at fde0fde0 (32-bit, non-prefetchable) [size=256] I/O ports at dff1c000 [size=16K] 00:04.0 PCI bridge [0604]: Unknown device [1022:9604] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 05 Memory at 00020200 (32-bit, non-prefetchable) [size=512] I/O ports at 2000d1d0 [size=16] Memory at fdd0fdd0 (32-bit, non-prefetchable) [size=256] I/O ports at fdc1fdc0 [size=64] 00:0a.0 PCI bridge [0604]: Unknown device [1022:9609] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at 00030300 (32-bit, non-prefetchable) [size=256] I/O ports at 2000c1c0 [size=64] Memory at fd90fd90 (32-bit, non-prefetchable) [size=256] I/O ports at fdf1fdf0 [size=16] 00:11.0 SATA controller [0106]: Unknown device [1002:4391] (rev 00) Subsystem: Unknown [1458:b002] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10 I/O ports at ff00 [size=256] I/O ports at fe00 [size=512] I/O ports at fd00 [size=256] I/O ports at fc00 [size=1K] I/O ports at fb00 [size=256] Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:12.0 USB controller [0c03]: Unknown device [1002:4397] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 05 Memory at fe02e000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:12.1 USB controller [0c03]: Unknown device [1002:4398] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 05 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 5! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:12.2 USB controller [0c03]: Unknown device [1002:4396] (rev 00) Subsystem: Unknown [1458:5004] Flags: 66MHz, medium devsel, latency 32, IRQ 11 Memory at fe02c000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:13.0 USB controller [0c03]: Unknown device [1002:4397] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 03 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:13.1 USB controller [0c03]: Unknown device [1002:4398] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 03 Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:13.2 USB controller [0c03]: Unknown device [1002:4396] (rev 00) Subsystem: Unknown [1458:5004] Flags: 66MHz, medium devsel, latency 32, IRQ 11 Memory at fe029000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:14.0 SMBus [0c05]: Unknown device [1002:4385] (rev 3a) Subsystem: Unknown [1458:4385] Flags: 66MHz, medium devsel, latency 0 00:14.1 IDE interface [0101]: Unknown device [1002:439c] (rev 00) Subsystem: Unknown [1458:5002] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ assignment required I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at 0000 I/O ports at fa00 [size=512] 00:14.2 Audio device [0403]: Unknown device [1002:4383] (rev 00) Subsystem: Unknown [1458:a022] Flags: bus master, slow devsel, latency 32, IRQ 05 Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 00:14.3 ISA bridge [0601]: Unknown device [1002:439d] (rev 00) Subsystem: Unknown [1002:439d] Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge [0604]: Unknown device [1002:4384] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, 66MHz, medium devsel, latency 64 Memory at 40040400 (32-bit, non-prefetchable) [size=1K] Memory at 2280b0b0 (32-bit, non-prefetchable) [size=4K] Memory at fdb0fdb0 (32-bit, non-prefetchable) [size=256] Memory at fda0fda0 (32-bit, non-prefetchable) [size=256] 00:14.5 USB controller [0c03]: Unknown device [1002:4399] (rev 00) Subsystem: Unknown [1458:5004] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 03 Memory at fe028000 (32-bit, non-prefetchable) [size=32K] Device is using IRQ 3! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:18.0 Host bridge [0600]: Unknown device [1022:1200] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.1 Host bridge [0600]: Unknown device [1022:1201] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.2 Host bridge [0600]: Unknown device [1022:1202] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.3 Host bridge [0600]: Unknown device [1022:1203] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 00:18.4 Host bridge [0600]: Unknown device [1022:1204] (rev 00) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 01:00.0 VGA compatible controller [0300]: Unknown device [1002:6658] (rev 00) Subsystem: Unknown [1787:200f] Flags: bus master, fast devsel, latency 0, IRQ 03 Memory at c0000000 (64-bit, prefetchable) [size=1024M] Memory at df800000 (64-bit, prefetchable) [size=8M] I/O ports at ee00 [size=512] Memory at fde80000 (32-bit, non-prefetchable) [size=512K] Device is using IRQ 3! ISA Cards using that IRQ may fail! 01:00.1 Audio device [0403]: Unknown device [1002:aac0] (rev 00) Subsystem: Unknown [1787:aac0] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fdefc000 (64-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! 02:00.0 SATA controller [0106]: Unknown device [1b4b:9123] (rev 11) Subsystem: Unknown [1b4b:9123] Flags: bus master, fast devsel, latency 0, IRQ 05 I/O ports at df00 [size=256] I/O ports at de00 [size=512] I/O ports at dd00 [size=256] I/O ports at dc00 [size=1K] I/O ports at db00 [size=256] Memory at fddff000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 5! ISA Cards using that IRQ may fail! 02:00.1 IDE interface [0101]: Unknown device [1b4b:91a4] (rev 11) Subsystem: Unknown [1b4b:91a4] Flags: bus master, fast devsel, latency 0, IRQ 11 I/O ports at da00 [size=512] I/O ports at d900 [size=256] I/O ports at d800 [size=2K] I/O ports at d700 [size=256] I/O ports at d600 [size=512] Memory at fddfe000 (32-bit, non-prefetchable) [size=8K] 03:00.0 Ethernet controller [0200]: Unknown device [10ec:8168] (rev 02) Subsystem: Unknown [1458:e000] Flags: bus master, fast devsel, latency 0, IRQ 03 I/O ports at ce00 [size=512] Memory at fdfff000 (64-bit, prefetchable) [size=4K] Memory at fdfe0000 (64-bit, prefetchable) [size=128K] Device is using IRQ 3! ISA Cards using that IRQ may fail! 04:06.0 Ethernet controller [0200]: Unknown device [10ec:8139] (rev 10) Subsystem: Unknown [10ec:8139] Flags: bus master, medium devsel, latency 64, IRQ 07 I/O ports at be00 [size=512] Memory at fdbff000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 7! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (../../ntoskrnl/io/pnpmgr/pnpmgr.c:3190) Firmware mapper is enabled (../../ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) SAC DriverEntry: Entering. (../../ntoskrnl/io/iomgr/driver.c:1629) '\Driver\SACDRV' initialization failed, status (0xc0000037) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\SACDRV' (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (../../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented! (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 2 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 2 (hal/halx86/legacy/bus/pcibus.c:715) WARNING: PCI Slot Resource Assignment is FOOBAR (../../ntoskrnl/io/iomgr/driver.c:1629) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' (../../ntoskrnl/fstub/disksup.c:1525) FSTUB: Partition Table 0: (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,1: type 0x7 Active (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000800 for 0x032000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x7 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000800 (../../ntoskrnl/fstub/disksup.c:1048) length 0x032000 (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,2: type 0x7 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x032800 for 0xee49000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x7 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x032800 (../../ntoskrnl/fstub/disksup.c:1048) length 0xee49000 (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,3: type 0x0 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000000 for 0x000000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x0 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000000 (../../ntoskrnl/fstub/disksup.c:1048) length 0x000000 (../../ntoskrnl/fstub/disksup.c:1052) FSTUB: unused entry (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,4: type 0x0 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000000 for 0x000000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x0 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000000 (../../ntoskrnl/fstub/disksup.c:1048) length 0x000000 (../../ntoskrnl/fstub/disksup.c:1052) FSTUB: unused entry (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\CDFS' (../../ntoskrnl/mm/ARM3/sysldr.c:937) Leaking driver: cdfs.sys (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device '*PNP0A03' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/halpnpdd.c:716) Start device received (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device 'PCI#CC_0604' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x2 on bus 0x0: None (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'VBE' for critical device 'PCI#CC_0300' (../../ntoskrnl/mm/ARM3/sysldr.c:3007) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../ntoskrnl/mm/ARM3/sysldr.c:3007) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x4 on bus 0x0: None (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xa on bus 0x0: None (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 5 to PCI device 0x12 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x12 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:517) SMM has given up ownership (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 2001903 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: e0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 106000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:773) Control bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 5 to PCI device 0x32 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x32 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:517) SMM has given up ownership (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B7417280 TransferBufferLength 12 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 201, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 201, Change 0 (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 2001903 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: e0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 10a000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:773) Control bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x52 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x52 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x102306 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0xa072 (drivers/usb/usbehci/hardware.cpp:371) Controller has 6 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 3 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 2 (drivers/usb/usbehci/hardware.cpp:267) Controller has Debug Port Support At Port 1 (drivers/usb/usbehci/hardware.cpp:272) Controller has Extended Capabilities Support (drivers/usb/usbehci/hardware.cpp:282) Controller supports Programmable Frame List Size (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:563) [EHCI] Extended Caps Support detected! (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 (drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 0 (drivers/usb/usbehci/hardware.cpp:1405) Low speed device connected. Releasing ownership (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 2 (drivers/usb/usbehci/hardware.cpp:1405) Low speed device connected. Releasing ownership (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 4 (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 0 (drivers/usb/usbehci/hardware.cpp:1418) Device disconnected on port 2 (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 4 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-2 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 6 (drivers/usb/usbehci/hardware.cpp:1104) Waiting 100 milliseconds for port to stabilize after connection (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B7413F40 TransferBufferLength 12 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 1 (lib/drivers/libusb/hub_controller.cpp:334) [USBOHCI] Change state on port 1 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbhub/fdo.c:262) Device disconnected from port 2 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbhub/fdo.c:1111) Removal request for non-existant device! (drivers/usb/usbhub/fdo.c:267) Failed to delete child device object after disconnect (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B7413F40 TransferBufferLength 12 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 3 to PCI device 0x13 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x13 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:517) SMM has given up ownership (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B7135180 TransferBufferLength 24 Flags 3 MDL 00000000 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 501, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (drivers/usb/usbehci/hardware.cpp:919) Waiting 50 milliseconds for port reset (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 2001903 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: e0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 112000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:773) Control bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-3 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B7135180 TransferBufferLength 24 Flags 3 MDL 00000000 (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 3 to PCI device 0x33 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x33 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:517) SMM has given up ownership (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 511, Change 10 (lib/drivers/libusb/hub_controller.cpp:334) [USBEHCI] Change state on port 4 (lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 2001903 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: e0000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 116000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:773) Control bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-4 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 3 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B7138138 TransferBufferLength 12 Flags 3 MDL 00000000 (drivers/usb/usbehci/hardware.cpp:1275) EHCI Status = 0xb (drivers/usb/usbehci/hardware.cpp:1321) CStatus b (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 0, Change 0 (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (drivers/usb/usbehci/hardware.cpp:1051) Waiting 50 milliseconds for port to recover after reset (drivers/usb/usbehci/hardware.cpp:1086) High speed device connected (lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x53 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x53 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x102306 (drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0xa072 (drivers/usb/usbehci/hardware.cpp:371) Controller has 6 Ports (drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 3 (drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 2 (drivers/usb/usbehci/hardware.cpp:267) Controller has Debug Port Support At Port 1 (drivers/usb/usbehci/hardware.cpp:272) Controller has Extended Capabilities Support (drivers/usb/usbehci/hardware.cpp:282) Controller supports Programmable Frame List Size (drivers/usb/usbehci/hardware.cpp:489) Starting Controller (drivers/usb/usbehci/hardware.cpp:563) [EHCI] Extended Caps Support detected! (drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 (drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (drivers/usb/usbehci/hardware.cpp:1394) Device connected on port 5 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-5 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 6 (drivers/usb/usbehci/hardware.cpp:1104) Waiting 100 milliseconds for port to stabilize after connection (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x94 on bus 0x0: None (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (hal/halx86/legacy/bus/pcibus.c:686) HAL: No PCI Resource Adjustment done! Hardware may malfunction (drivers/bus/pci/pdo.c:1272) Assigning IRQ 3 to PCI device 0xb4 on bus 0x0 (drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xb4 on bus 0x0: [Bus master] [Memory space enable] (drivers/usb/usbohci/hardware.cpp:383) Starting Controller (drivers/usb/usbohci/hardware.cpp:517) SMM has given up ownership (drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 2 (drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 2001902 (drivers/usb/usbohci/hardware.cpp:723) Descriptor B: 60000 (drivers/usb/usbohci/hardware.cpp:733) HCCA: 11e000 Alignment mask: ffffff00 (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:773) Control bf (drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-6 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:716) ZwOpenKey() failed with Status C0000034 (drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 2 (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (drivers/usb/usbohci/hardware.cpp:1209) Waiting 4 milliseconds for port power up (drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4032) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/mm/ARM3/sysldr.c:3007) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 0 (../../ntoskrnl/fstub/disksup.c:1525) FSTUB: Partition Table 0: (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,1: type 0x7 Active (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000800 for 0x032000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x7 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000800 (../../ntoskrnl/fstub/disksup.c:1048) length 0x032000 (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,2: type 0x7 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x032800 for 0xee49000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x7 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x032800 (../../ntoskrnl/fstub/disksup.c:1048) length 0xee49000 (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,3: type 0x0 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000000 for 0x000000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x0 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000000 (../../ntoskrnl/fstub/disksup.c:1048) length 0x000000 (../../ntoskrnl/fstub/disksup.c:1052) FSTUB: unused entry (../../ntoskrnl/fstub/disksup.c:1536) Partition Entry 0,4: type 0x0 (../../ntoskrnl/fstub/disksup.c:1539) Offset 0x000000 for 0x000000 Sectors (../../ntoskrnl/fstub/disksup.c:1045) FSTUB: entry (../../ntoskrnl/fstub/disksup.c:1046) type 0x0 (../../ntoskrnl/fstub/disksup.c:1047) offset 0x000000 (../../ntoskrnl/fstub/disksup.c:1048) length 0x000000 (../../ntoskrnl/fstub/disksup.c:1052) FSTUB: unused entry (../../ntoskrnl/io/iomgr/arcname.c:749) Try create \Device\Harddisk0\Partition1, status 0xf78b6a40 (../../ntoskrnl/io/iomgr/arcname.c:749) Try create \Device\Harddisk0\Partition2, status 0xf78b6a40 (../../ntoskrnl/io/iomgr/arcname.c:749) Try create \Device\Harddisk0\Partition3, status 0xf78b6a40 (../../ntoskrnl/io/iomgr/arcname.c:749) Try create \Device\Harddisk0\Partition4, status 0xf78b6a40 (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 1 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 2 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 3 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 4 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 5 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 6 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 7 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 8 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 9 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 10 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 11 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 12 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 13 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 14 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 15 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 16 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 17 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 18 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 19 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:490) Try DISK 20 (../../ntoskrnl/io/iomgr/arcname.c:588) DIsk access error, status 0xc000003a (../../ntoskrnl/io/iomgr/arcname.c:832) IopCreateArcNamesDisk: status 0x0 (../../ntoskrnl/io/iomgr/arcname.c:403) IopCreateArcNamesCd: status 0xc0000034 *** Fatal System Error: 0x0000007b (0xF78B6A24,0xC0000034,0x00000000,0x00000000)  Entered debugger on embedded INT3 at 0x0008:0x8095da38. kdb:> bt Eip: Frames: <0000000e> Couldn't access memory at 0x00097B38! kdb:> cont (../../ntoskrnl/ke/bug.c:600) Potentially unloaded driver! (../../ntoskrnl/ke/bug.c:600) Potentially unloaded driver! (../../ntoskrnl/ke/bug.c:600) Potentially unloaded driver! (../../ntoskrnl/ke/bug.c:600) Potentially unloaded driver!  Entered debugger on embedded INT3 at 0x0008:0x8095da38. kdb:>