(../../ntoskrnl/kd/kdio.c:376) ----------------------------------------------------- (../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20141020-r64857) (../../ntoskrnl/kd/kdio.c:379) 1 System Processor [1023 MB Memory] (../../ntoskrnl/kd/kdio.c:380) Command Line: DEBUG DEBUGPORT=COM1 BAUDRATE=115200 SOS MININT (../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(96) \ multi(0)disk(0)cdrom(96) \reactos\ (../../ntoskrnl/ke/i386/cpu.c:494) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4 KF_CMOV KF_GLOBAL_PAGE KF_LARGE_PAGE KF_MTRR KF_CMPXCHG8B KF_MMX KF_WORKING_PTE KF_PAT KF_FXSR KF_FAST_SYSCALL KF_XMMI KF_XMMI64 (../../ntoskrnl/ke/i386/cpu.c:801) Prefetch Cache: 64 bytes L2 Cache: 0 bytes L2 Cache Line: 64 bytes L2 Cache Associativity: 0 (../../ntoskrnl/mm/ARM3/mminit.c:1443) HAL I/O Mapping at FFFE0000 is unsafe (../../ntoskrnl/mm/mminit.c:260) 0x80000000 - 0x83000000 Boot Loaded Image (../../ntoskrnl/mm/mminit.c:264) 0xB0000000 - 0xB0701000 PFN Database (../../ntoskrnl/mm/mminit.c:268) 0xB0701000 - 0xB26C9000 ARM3 Non Paged Pool (../../ntoskrnl/mm/mminit.c:272) 0xB9400000 - 0xBB400000 System View Space (../../ntoskrnl/mm/mminit.c:276) 0xBB400000 - 0xC0000000 Session Space (../../ntoskrnl/mm/mminit.c:279) 0xC0000000 - 0xC03FFFFF Page Tables (../../ntoskrnl/mm/mminit.c:282) 0xC0300000 - 0xC0300FFF Page Directories (../../ntoskrnl/mm/mminit.c:285) 0xC0400000 - 0xC07FFFFF Hyperspace (../../ntoskrnl/mm/mminit.c:289) 0xE1000000 - 0xECC00000 ARM3 Paged Pool (../../ntoskrnl/mm/mminit.c:292) 0xECC00000 - 0xF7BE0000 System PTE Space (../../ntoskrnl/mm/mminit.c:295) 0xF7BE0000 - 0xFFBE0000 Non Paged Pool Expansion PTE Space (../../ntoskrnl/config/cmcheck.c:25) CmCheckRegistry(0xB2473008, 2) is UNIMPLEMENTED! (../../hal/halx86/legacy/bussupp.c:623) Found parent bus (indicating PCI Bridge). PCI devices may fail! ====== PCI BUS HARDWARE DETECTION ======= 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Unknown [0000:0000] Flags: fast devsel, latency 0 Device has Extended Address Decoding. It may fail to work on older BIOSes! 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at e0000000 (32-bit, prefetchable) [size=512M] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:03.0 Ethernet controller [0200]: Advanced Micro Devices, Inc. [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 40) Subsystem: PCnet - Fast 79C971 [1022:2000] Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at d000 [size=4K] Memory at f0000000 (32-bit, non-prefetchable) [size=256M] Device is using IRQ 10! ISA Cards using that IRQ may fail! 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 09 I/O ports at d020 [size=32] Memory at f0400000 (32-bit, non-prefetchable) [size=4M] Memory at f0800000 (32-bit, prefetchable) [size=8M] Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01) Subsystem: Terminator 2x/i [8086:0000] Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at d100 [size=256] I/O ports at d200 [size=512] Device is using IRQ 11! ISA Cards using that IRQ may fail! 00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f] (rev 00) Subsystem: GLoria L [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f0804000 (32-bit, non-prefetchable) [size=16K] Device is using IRQ 11! ISA Cards using that IRQ may fail! Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS! 00:07.0 Secondary bus towards host CPU [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Subsystem: Unknown [0000:0000] Flags: bus master, medium devsel, latency 0, IRQ 09 Device is using IRQ 9! ISA Cards using that IRQ may fail! 00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 00) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f0805000 (32-bit, non-prefetchable) [size=4K] Device is using IRQ 10! ISA Cards using that IRQ may fail! Device is an Intel UHCI (USB) Controller. Turn off Legacy USB in your BIOS! 00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02) Subsystem: Unknown [0000:0000] Flags: bus master, fast devsel, latency 0, IRQ 11 I/O ports at d240 [size=64] I/O ports at d248 [size=8] I/O ports at d250 [size=16] I/O ports at d258 [size=8] I/O ports at d260 [size=32] Memory at f0806000 (32-bit, non-prefetchable) [size=8K] Device is using IRQ 11! ISA Cards using that IRQ may fail! ====== PCI BUS DETECTION COMPLETE ======= PC Compatible Eisa/Isa HAL Detected (../../ntoskrnl/io/pnpmgr/pnpmgr.c:3192) Firmware mapper is enabled (../../ntoskrnl/io/pnpmgr/pnpreport.c:353) Reported device: DETECTEDInternal\PCI_HAL (Root\PCI_HAL\0) (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: UNKNOWN SAC DriverEntry: Entering. (../../ntoskrnl/io/iomgr/driver.c:1634) '\Driver\SACDRV' initialization failed, status (0xc0000037) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\SACDRV' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: ACPI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: MOUNTMGR (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: PCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBCCGP (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBEHCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBHUB (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBOHCI (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBUHCI ATAPI IDE MiniPort Driver (UniATA) v 0.45c1 Parameter PrintLogo Parameter PrintLogo = 0x0 UniATA Init: OS should be ReactOS UniATA Init: OS ver 4.1 (1), 1 CPU(s) Performance calibration: dt=14995, counter=3569637 InitBadBlocks general InitBadBlocks returned: 0xc0000034 UniataInitAtaCommands: Parameter SkipRaids Parameter SkipRaids = 0x1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 Parameter LogToDisplay Parameter LogToDisplay = 0x0 HwInitializationDataSize = 50 set NeedPhysicalAddresses = TRUE set AtapiAdapterControl() ptr ATAPI IDE enum supported BusMaster Devices Parameter VirtualMachineType Parameter VirtualMachineType = 0x0 Parameter VirtualBox Parameter VirtualBox = 0x0 -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 0 InterruptPin = 0x1 InterruptLine = 0xb Enabling Mem/Io spaces and busmastering... Initial pciData.Command = 0x7 PCI_ENABLE_IO_SPACE PCI_ENABLE_MEMORY_SPACE PCI_ENABLE_BUS_MASTER InterruptLine = 0xb Final pciData.Command = 0x7 Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 count: BMListLen++ -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 1 InterruptPin = 0x1 InterruptLine = 0xb Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 found suitable device -- BusID: 0x0:0x4:0x0 - VirtualBox Guest Service -- BusID: 0x0:0xd:0x0 Storage Class DevId = 28298086 Class = 0001/0006, ProgIf 01 Parameter Include Parameter Include = 0x0 No force include, check exclude Parameter Exclude Parameter Exclude = 0x0 Default device found, pass 2 InterruptPin = 0x1 InterruptLine = 0xb Range 0 = 0xd241 Range 1 = 0xd249 Range 2 = 0xd251 Range 3 = 0xd259 Range 4 = 0xd261 Range 5 = 0xf0806000 found suitable device Add to BMList, AltInit 0 BMListLen=1 adjust options for VirtualBox Parameter WaitBusyCount Parameter WaitBusyCount = 0x4e20 Parameter WaitBusyDelay Parameter WaitBusyDelay = 0x96 Parameter WaitDrqDelay Parameter WaitDrqDelay = 0x64 Parameter WaitBusyLongCount Parameter WaitBusyLongCount = 0x4e20 Parameter WaitBusyLongDelay Parameter WaitBusyLongDelay = 0xfa Parameter AtapiSendDisableIntr Parameter AtapiSendDisableIntr = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x0 Parameter MaxIsrWait Parameter MaxIsrWait = 0xc8 ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard) ATAPI IDE: BMListLen 1 !BMList[i].MasterDev ATAPI IDE: Look for PCI IDE controller ATAPI IDE: i 0, BMListLen 1 Parameter IgnoreNativePci Parameter IgnoreNativePci = 0x0 Try init 8086 2829 (../../hal/halx86/legacy/bussupp.c:1159) Slot assignment for 5 on bus 0 (../../hal/halx86/legacy/bus/pcibus.c:719) WARNING: PCI Slot Resource Assignment is FOOBAR UniataFindBusMasterController: Context=0, BMListLen=1 ConfigInfo->Length 8c bm_offset 0, channel 0 AdapterInterfaceType=0x5 IoBusNumber=0x0 slotNumber=0xd busDataRead DevId = 28298086 Class = 0001/0006 Storage Class UniataChipDetect: HwFlags: 0x0 Parameter ForceSimplex Parameter ForceSimplex = 0x0 i: 0x33 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 i: 0x2a HwFlags: 0x12000000 Parameter HwFlagsOverride Parameter HwFlagsOverride = 0x12000000 HwFlagsOverride: 0x12000000 Parameter HwFlagsAdd Parameter HwFlagsAdd = 0x0 HwFlagsAdd: 0x0 HwFlags (final): 0x12000000 MaxTransferMode: 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 UniataAhciDetect: Parameter IgnoreAhci Parameter IgnoreAhci = 0x0 AtapiGetIoRange: AtapiGetIoRange: rid 0x5, start 0xf0806000, offs 0x0, len 0x10, mem 0x1 AtapiGetIoRange: 0xf77d5000 MemIo AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000000 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 check AHCI mode, GHC 0x80000000 AHCI CAP 0xc8241f83, CAP2 0x0 64bit NCQ CCC AHCI PI 0xf CommandSlots 31 Detected Channels 4 / 4 Adjusted Channels 4 AHCI version 0x1.10 controller with 4 ports (mask 0xf) detected AHCI SATA Gen 2 PM not supported -> 1 lun/chan AHCI detect status 1 allocate 1 Luns for 4 channels Intel chip config: 40 try run AHCI ForceSimplex = 0 HwFlags = 12000000 (0)HwFlags = 12000000 (1)HwFlags = 12000000 (2)found suitable device HwFlags = 12000000 (3) AHCI registers layout AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x0 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0x0, ph chan -2, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 UniataAhciInit: AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000000 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 get GHC disable intr, GHC 0x80000000 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000000 AHCI GHC 0x80000000 AHCI CAP 0xc8241f83 AHCI 64bit AHCI 31 CMD slots AHCI legasy SATA AHCI PI 0xf SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b246c000 AtapiDmaAlloc: CLP BASE 1k-aligned b246c000 AtapiVirtToPhysAddr_: b246c000 -> 00000000:04d6b000 AtapiDmaAlloc: CLP Phys BASE 4d6b000 imp: 0xf & 0x1 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 4d6b000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 4d6b400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x1000c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x130 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x0 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b2690000 AtapiDmaAlloc: CLP BASE 1k-aligned b2690000 AtapiVirtToPhysAddr_: b2690000 -> 00000000:04f8f000 AtapiDmaAlloc: CLP Phys BASE 4f8f000 imp: 0xf & 0x2 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 4f8f000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 4f8f400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x130 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x0 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b246a000 AtapiDmaAlloc: CLP BASE 1k-aligned b246a000 AtapiVirtToPhysAddr_: b246a000 -> 00000000:04d69000 AtapiDmaAlloc: CLP Phys BASE 4d69000 imp: 0xf & 0x4 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 4d69000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 4d69400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x130 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x0 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiDmaAlloc: AHCI AtapiDmaAlloc: CLP BASE b268e000 AtapiDmaAlloc: CLP BASE 1k-aligned b268e000 AtapiVirtToPhysAddr_: b268e000 -> 00000000:04f8d000 AtapiDmaAlloc: CLP Phys BASE 4f8d000 imp: 0xf & 0x8 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 4f8d000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 4f8d400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0x0 AHCI3_0x18 (0xf77d5298) = 0x1000c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x130 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x0 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 simplexOnly = 0 (2)!MasterDev update ConfigInfo->nt4 using AtaReq sz 1000 update ConfigInfo->w2k: 64bit 1 chan[0] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 Reconstruct ConfigInfo set Dma32BitAddresses BMList[i].channel 0x0, NumberChannels 0x4, channel 0x0 de 0xb246f2b4, Channel 0x0 chan = 0xb2692008 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 0 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d5120(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d5128(mem) AtapiDmaAlloc: AHCI already initialized b246c000 de 0xb246f2b4, Channel 0x1 chan = 0xb2692270 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d51a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d51a8(mem) AtapiDmaAlloc: AHCI already initialized b2690000 de 0xb246f2b4, Channel 0x2 chan = 0xb26924d8 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 2 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d5220(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d5228(mem) AtapiDmaAlloc: AHCI already initialized b246a000 de 0xb246f2b4, Channel 0x3 chan = 0xb2692740 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiReadChipConfig: devExt 0xb246f2b4 AtapiReadChipConfig: dev 0x0, ph chan 3 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 MaxTransferMode (overriden): 0x48 Parameter ReorderEnable Parameter ReorderEnable = 0x1 Parameter ReadCacheEnable Parameter ReadCacheEnable = 0x1 Parameter WriteCacheEnable Parameter WriteCacheEnable = 0x1 Parameter MaxTransferMode Parameter MaxTransferMode = 0x48 Parameter PreferedTransferMode Parameter PreferedTransferMode = 0xffffffff Parameter AdvancedPowerMode Parameter AdvancedPowerMode = 0x80 Parameter AcousticMgmt Parameter AcousticMgmt = 0x80 Parameter StandbyTimer Parameter StandbyTimer = 0x0 Parameter ReadOnly Parameter ReadOnly = 0x0 Parameter GeomType Parameter GeomType = 0xffffffff Parameter Hidden Parameter Hidden = 0x0 No more setup for AHCI channel IDX_IO1 0->0(io) IDX_IO2 10->f77d52a0(mem) IDX_BM_IO 14->0(io) IDX_SATA_IO 19->f77d52a8(mem) AtapiDmaAlloc: AHCI already initialized b268e000 exit: init spinlock MasterDev=0x0, NumberChannels=0x4, Isr2DevObj=0x0 Init ISR: Multichannel native mode, go... Create DO DO name: len(38, 38), \Device\uniata0_2ch HalGetInterruptVector OrigAdapterInterfaceType=5 SystemIoBusNumber=0 BusInterruptLevel=11 BusInterruptVector=11 isr2_de 0xb2692d50 isr2_vector 0x3b isr2_irql 0x10 isr2_affinity 0x1 IoConnectInterrupt MasterDev=0x0, NumberChannels=0x4, Isr2DevObj=0xb2692c98 final chan[4] InterruptMode: 0, Level 11, Level2 0, Vector 11, Vector2 0 return SP_RETURN_FOUND AtapiHwInitialize: (base) AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 UniataAhciInit: AHCI Base: 0xf77d5000 MemIo 1 Proc 0 AHCI_0x0 (0xf77d5000) = 0xc8241f83 AHCI_0x4 (0xf77d5004) = 0x80000002 AHCI_0x8 (0xf77d5008) = 0x0 AHCI_0xc (0xf77d500c) = 0xf AHCI_0x10 (0xf77d5010) = 0x10100 get GHC disable intr, GHC 0x80000002 reset AHCI controller, GHC 0x80000000 AHCI GHC 0x80000000 AHCI GHC 0x80000000 AHCI CAP 0xc8241f83 AHCI 64bit AHCI 31 CMD slots AHCI legasy SATA AHCI PI 0xf SATA Gen 2 chan 0, offs 0x100 AtapiSetupLunPtrs for channel 0 of 4, 1 luns Chan 0xb2692008 Lun 0x0 Lun ptr 0xb246e008 AtaReq 0xb2693000: cmd aligned b2693080, d=20 ahci_cmd_ptr 0xb2693080 AtapiDmaAlloc: AHCI already initialized b246c000 imp: 0xf & 0x1 UniataAhciResume: lChan 0 WriteChannelPort4 0 => ch0[14] AHCI CLB setup WriteChannelPort4 4d6b000 => ch0[0] WriteChannelPort4 0 => ch0[4] AHCI RCV FIS setup WriteChannelPort4 4d6b400 => ch0[8] WriteChannelPort4 0 => ch0[c] WriteChannelPort4 10000006 => ch0[18] UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x1000c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x130 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x0 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 chan 1, offs 0x180 AtapiSetupLunPtrs for channel 1 of 4, 1 luns Chan 0xb2692270 Lun 0x0 Lun ptr 0xb246e310 AtaReq 0xb2694000: cmd aligned b2694080, d=20 ahci_cmd_ptr 0xb2694080 AtapiDmaAlloc: AHCI already initialized b2690000 imp: 0xf & 0x2 UniataAhciResume: lChan 1 WriteChannelPort4 0 => ch1[14] AHCI CLB setup WriteChannelPort4 4f8f000 => ch1[0] WriteChannelPort4 0 => ch1[4] AHCI RCV FIS setup WriteChannelPort4 4f8f400 => ch1[8] WriteChannelPort4 0 => ch1[c] WriteChannelPort4 10000006 => ch1[18] UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x130 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x0 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 chan 2, offs 0x200 AtapiSetupLunPtrs for channel 2 of 4, 1 luns Chan 0xb26924d8 Lun 0x0 Lun ptr 0xb246e618 AtaReq 0xb2695000: cmd aligned b2695080, d=20 ahci_cmd_ptr 0xb2695080 AtapiDmaAlloc: AHCI already initialized b246a000 imp: 0xf & 0x4 UniataAhciResume: lChan 2 WriteChannelPort4 0 => ch2[14] AHCI CLB setup WriteChannelPort4 4d69000 => ch2[0] WriteChannelPort4 0 => ch2[4] AHCI RCV FIS setup WriteChannelPort4 4d69400 => ch2[8] WriteChannelPort4 0 => ch2[c] WriteChannelPort4 10000006 => ch2[18] UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x130 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x0 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 chan 3, offs 0x280 AtapiSetupLunPtrs for channel 3 of 4, 1 luns Chan 0xb2692740 Lun 0x0 Lun ptr 0xb246e920 AtaReq 0xb2696000: cmd aligned b2696080, d=20 ahci_cmd_ptr 0xb2696080 AtapiDmaAlloc: AHCI already initialized b268e000 imp: 0xf & 0x8 UniataAhciResume: lChan 3 WriteChannelPort4 0 => ch3[14] AHCI CLB setup WriteChannelPort4 4f8d000 => ch3[0] WriteChannelPort4 0 => ch3[4] AHCI RCV FIS setup WriteChannelPort4 4f8d400 => ch3[8] WriteChannelPort4 0 => ch3[c] WriteChannelPort4 10000006 => ch3[18] UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0x0 AHCI3_0x18 (0xf77d5298) = 0x1000c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x130 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x0 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 imp: 0xf & 0x1 AtapiChipInit: dev 0xffffffff, ph chan 0, c 0 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 AHCI single channel init UniataAhciReset: lChan 0 WriteChannelPort4 0 => ch0[14] UniataAhciHardReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x31 UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 131 TFD 0x131 TFD 0x131 AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x1 AHCI0_0x14 (0xf77d5114) = 0x0 AHCI0_0x18 (0xf77d5118) = 0x10004016 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x131 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 ReadChannelPort4 ch0[24] = eb140101 sig: 0xeb140101 UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 1 WriteChannelPort4 1 => ch0[10] SError 0x0, IS 0x1 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] WriteChannelPort4 f900003f => ch0[14] UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 CI 0x0 ReadChannelPort4 ch0[10] = 0 IS 0x0 WriteChannelPort4 0 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0xeb140101 ATAPI dev FindDevices: AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch0[24] = eb140101 ATAPI at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1000c017 WriteChannelPort4 1000c016 => ch0[18] ReadChannelPort4 ch0[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch0[18] ReadChannelPort4 ch0[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch0[18] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciSendCommand: lChan 0 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 CI 0x0 ReadChannelPort4 ch0[10] = 0 IS 0x0 WriteChannelPort4 0 => ch0[10] UniataAhciWaitReady: lChan 0 ReadChannelPort4 ch0[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for ATAPI. Status (0x30) UniataAhciSendPIOCommand: cntrlr 0x0:0x0 dev 0x0, cmd 0xa1, lba 0x0 bcount 0x0 feature 0x0, buff 0xb246f2f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb246fb18, AtaReq 0xb2693000, CMD 0xb2693080 ph 0 AHCI setup FIS b2693080, ch 0, dev 0 27 80 a1 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b246f2f8, count 200, lCh 0, dev 0 get Phys(AHCI_CMD=b2693080) AtapiVirtToPhysAddr_: b2693080 -> 00000000:04f92080 get Phys(data[0]=b246f2f8) AtapiVirtToPhysAddr_: b246f2f8 -> 00000000:04d6e2f8 set TERM ph data[0]=0:4d6e2f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2693000 AHCI AtaReq CMD 0xb2693080 (ph 0x4f92080) prd_length 0x1, flags 0x5, base 4f92080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 IssueIdentify: Status after read words 0x50 Model: BVXOC -DOR M FW: .1 0 S/N: BV-0a1b2c3d4 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 0 SATA support: 0, CAPs 0x104 OrigTransferMode: 48, Active: 48 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 InitBadBlocks local LunExt 0xb246e008 S/N:VBOX_CD-ROM_____________________________-VB0-1a2b3c4d________ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found imp: 0xf & 0x1 AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x0, dev 0 AtapiDisableInterrupts_0: 0 WriteChannelPort4 0 => ch0[14] AtapiHwInitialize: ATAPI/Changer branch try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 0/0 AtapiDisableInterrupts_0: 1 WriteChannelPort4 0 => ch0[14] UniataAhciSendPIOCommand: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 0 [0x0] Srb 0xb246fb18, AtaReq 0xb2693000, CMD 0xb2693080 ph 4f92080 AHCI setup FIS b2693080, ch 0, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2693000 AHCI AtaReq CMD 0xb2693080 (ph 0x4f92080) prd_length 0x0, flags 0x5, base 4f92080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch0[38] ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[10] = 1 CI 0x1 ReadChannelPort4 ch0[10] = 1 IS 0x1 WriteChannelPort4 1 => ch0[10] UniataAhciStatus(0-0): hIS 0x0 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 0 TFD 0x0 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 imp: 0xf & 0x1 AtapiEnableInterrupts_0: 2 WriteChannelPort4 0 => ch0[14] Using 0x48 mode imp: 0xf & 0x1 AtapiEnableInterrupts_0: 1 WriteChannelPort4 fd4000ff => ch0[14] imp: 0xf & 0x2 AtapiChipInit: dev 0xffffffff, ph chan 1, c 1 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 AHCI single channel init UniataAhciReset: lChan 1 WriteChannelPort4 0 => ch1[14] UniataAhciHardReset: lChan 1 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1000c017 WriteChannelPort4 1000c016 => ch1[18] ReadChannelPort4 ch1[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x71 UniataAhciWaitReady: lChan 1 ReadChannelPort4 ch1[20] = 171 TFD 0x171 TFD 0x171 AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x1 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x10004016 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x171 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x300 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 ReadChannelPort4 ch1[24] = 101 sig: 0x101 UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 1 WriteChannelPort4 1 => ch1[10] SError 0x0, IS 0x1 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] WriteChannelPort4 f900003f => ch1[14] UniataAhciSoftReset: lChan 1 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1000c017 WriteChannelPort4 1000c016 => ch1[18] ReadChannelPort4 ch1[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch1[18] ReadChannelPort4 ch1[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 1 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] UniataAhciSendCommand: lChan 1 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciSendCommand: lChan 1 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] UniataAhciWaitReady: lChan 1 ReadChannelPort4 ch1[20] = 170 TFD 0x170 34 00 00 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0x101 ATA dev FindDevices: AtapiDisableInterrupts_1: 0 WriteChannelPort4 0 => ch1[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch1[24] = 101 AHCI HDD at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 1 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1000c017 WriteChannelPort4 1000c016 => ch1[18] ReadChannelPort4 ch1[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch1[18] ReadChannelPort4 ch1[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 1 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] UniataAhciSendCommand: lChan 1 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciSendCommand: lChan 1 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 CI 0x0 ReadChannelPort4 ch1[10] = 0 IS 0x0 WriteChannelPort4 0 => ch1[10] UniataAhciWaitReady: lChan 1 ReadChannelPort4 ch1[20] = 170 TFD 0x170 34 00 00 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for IDE. Status (0x50) UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xec, lba 0x0 bcount 0x0 feature 0x0, buff 0xb246f2f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 0 AHCI setup FIS b2694080, ch 1, dev 0 27 80 ec 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b246f2f8, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2694080) AtapiVirtToPhysAddr_: b2694080 -> 00000000:04f93080 get Phys(data[0]=b246f2f8) AtapiVirtToPhysAddr_: b246f2f8 -> 00000000:04d6e2f8 set TERM ph data[0]=0:4d6e2f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x1, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 0 TFD 0x0 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 IssueIdentify: Status after read words 0x50 Model: BVXOH RADDSI K FW: .1 0 S/N: BV45a37ff9f-63fa3b 1 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 0 SATA support: 0, CAPs 0x104 OrigTransferMode: 48, Active: 48 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 PhysLogSectorSize 0x0, 0x0, offset 0x0 NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0 R-rate 0 CHS 0x28a2:0x10:0x3f NumOfSectors 0x9ffde0 SupportLba flag 0x1 MajorRevision 0x7e UserAddressableSectors 0xa00000 LBA mode LBA48 cylinders 0x28a2 NativeNumOfSectors 0x9ffde0 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 0 TFD 0x0 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 NativeNumOfSectors 0x0 High-order bytes == Low-order bytes !!! AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 0 TFD 0x0 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 High-order bytes == Low-order bytes !!! (2) Use IDE_COMMAND_READ_NATIVE_SIZE UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xf8, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 f8 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 0 TFD 0x0 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 NativeNumOfSectors 0x0 requested LunExt->GeomType=ffffffff tmp_cylinders = 0x28a2 Geometry: C 0x28a2 (0x28a2) Geometry: H 0x10 (0x10) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb246e310 S/N:VBOX_HARDDISK___________________________-VB543af79f-f36afb31_ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x0) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found imp: 0xf & 0x2 AtapiEnableInterrupts_1: 1 WriteChannelPort4 fd4000ff => ch1[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x1, dev 0 AtapiDisableInterrupts_1: 0 WriteChannelPort4 0 => ch1[14] AtapiHwInitialize: IDE branch UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 0 Try Enable Read Cache UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0xaa, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 ef aa 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 Try Enable Write Cache UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0x2, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 ef 02 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 Try Enable Adv. Power Mgmt UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 bcount 0x80 feature 0x5, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 ef 05 00 00 00 a0 00 00 00 00 80 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 40000000 CI 0x1 ReadChannelPort4 ch1[10] = 40000000 IS 0x40000000 WriteChannelPort4 40000000 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 441 TFD 0x441 ERROR 0x4 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x41, error 0x4 AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x441 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x300 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x1 AHCI1_0x3c (0xf77d51bc) = 0x0 UniataAhciStop: lChan 1 ReadChannelPort4 ch1[18] = 1000c017 WriteChannelPort4 1000c016 => ch1[18] ReadChannelPort4 ch1[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 1 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch1[18] ReadChannelPort4 ch1[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 1 UniataAhciStartFR: lChan 1 ReadChannelPort4 ch1[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch1[18] UniataAhciStart: lChan 1 ReadChannelPort4 ch1[10] = 0 WriteChannelPort4 0 => ch1[10] SError 0x0, IS 0x0 ReadChannelPort4 ch1[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch1[18] AHCI port 1 Base: 0xf77d5180 MemIo 1 Proc 0 AHCI1_0x0 (0xf77d5180) = 0x4f8f000 AHCI1_0x4 (0xf77d5184) = 0x0 AHCI1_0x8 (0xf77d5188) = 0x4f8f400 AHCI1_0xc (0xf77d518c) = 0x0 AHCI1_0x10 (0xf77d5190) = 0x0 AHCI1_0x14 (0xf77d5194) = 0x0 AHCI1_0x18 (0xf77d5198) = 0x1000c017 AHCI1_0x1c (0xf77d519c) = 0x0 AHCI1_0x20 (0xf77d51a0) = 0x441 AHCI1_0x24 (0xf77d51a4) = 0x101 AHCI1_0x28 (0xf77d51a8) = 0x123 AHCI1_0x2c (0xf77d51ac) = 0x300 AHCI1_0x30 (0xf77d51b0) = 0x0 AHCI1_0x34 (0xf77d51b4) = 0x0 AHCI1_0x38 (0xf77d51b8) = 0x0 AHCI1_0x3c (0xf77d51bc) = 0x0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 IDE_STATUS_ERROR detected on entry, statusByte = 0x41 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 1/0 AtapiDisableInterrupts_1: 1 WriteChannelPort4 0 => ch1[14] UniataAhciSendPIOCommand: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 1 [0x0] Srb 0xb246fb58, AtaReq 0xb2694000, CMD 0xb2694080 ph 4f93080 AHCI setup FIS b2694080, ch 1, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2694000 AHCI AtaReq CMD 0xb2694080 (ph 0x4f93080) prd_length 0x0, flags 0x5, base 4f93080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] ReadChannelPort4 ch1[38] = 1 ReadChannelPort4 ch1[10] = 1 CI 0x1 ReadChannelPort4 ch1[10] = 1 IS 0x1 WriteChannelPort4 1 => ch1[10] UniataAhciStatus(1-1): hIS 0x0 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 0 TFD 0x0 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 imp: 0xf & 0x2 AtapiEnableInterrupts_1: 2 WriteChannelPort4 0 => ch1[14] Using 0x48 mode imp: 0xf & 0x2 AtapiEnableInterrupts_1: 1 WriteChannelPort4 fd4000ff => ch1[14] imp: 0xf & 0x4 AtapiChipInit: dev 0xffffffff, ph chan 2, c 2 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 AHCI single channel init UniataAhciReset: lChan 2 WriteChannelPort4 0 => ch2[14] UniataAhciHardReset: lChan 2 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = 1000c017 WriteChannelPort4 1000c016 => ch2[18] ReadChannelPort4 ch2[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x71 UniataAhciWaitReady: lChan 2 ReadChannelPort4 ch2[20] = 171 TFD 0x171 TFD 0x171 AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x1 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x10004016 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x171 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x300 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 ReadChannelPort4 ch2[24] = 101 sig: 0x101 UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 1 WriteChannelPort4 1 => ch2[10] SError 0x0, IS 0x1 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] WriteChannelPort4 f900003f => ch2[14] UniataAhciSoftReset: lChan 2 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = 1000c017 WriteChannelPort4 1000c016 => ch2[18] ReadChannelPort4 ch2[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 2 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch2[18] ReadChannelPort4 ch2[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 2 UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] UniataAhciSendCommand: lChan 2 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciSendCommand: lChan 2 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 CI 0x0 ReadChannelPort4 ch2[10] = 0 IS 0x0 WriteChannelPort4 0 => ch2[10] UniataAhciWaitReady: lChan 2 ReadChannelPort4 ch2[20] = 170 TFD 0x170 34 00 00 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0x101 ATA dev FindDevices: AtapiDisableInterrupts_2: 0 WriteChannelPort4 0 => ch2[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch2[24] = 101 AHCI HDD at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 2 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = 1000c017 WriteChannelPort4 1000c016 => ch2[18] ReadChannelPort4 ch2[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 2 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch2[18] ReadChannelPort4 ch2[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 2 UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] UniataAhciSendCommand: lChan 2 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciSendCommand: lChan 2 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 CI 0x0 ReadChannelPort4 ch2[10] = 0 IS 0x0 WriteChannelPort4 0 => ch2[10] UniataAhciWaitReady: lChan 2 ReadChannelPort4 ch2[20] = 170 TFD 0x170 34 00 00 01 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for IDE. Status (0x50) UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xec, lba 0x0 bcount 0x0 feature 0x0, buff 0xb246f2f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 0 AHCI setup FIS b2695080, ch 2, dev 0 27 80 ec 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b246f2f8, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2695080) AtapiVirtToPhysAddr_: b2695080 -> 00000000:04f94080 get Phys(data[0]=b246f2f8) AtapiVirtToPhysAddr_: b246f2f8 -> 00000000:04d6e2f8 set TERM ph data[0]=0:4d6e2f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x1, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 0 TFD 0x0 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 IssueIdentify: Status after read words 0x50 Model: BVXOH RADDSI K FW: .1 0 S/N: BVc5e9d6f56-443bed 6 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 0 SATA support: 0, CAPs 0x104 OrigTransferMode: 48, Active: 48 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 PhysLogSectorSize 0x0, 0x0, offset 0x0 NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0 R-rate 0 CHS 0x1861:0x10:0x3f NumOfSectors 0x5ffdf0 SupportLba flag 0x1 MajorRevision 0x7e UserAddressableSectors 0x600000 LBA mode LBA48 cylinders 0x1861 NativeNumOfSectors 0x5ffdf0 Use IDE_COMMAND_READ_NATIVE_SIZE48 AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 0 TFD 0x0 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 NativeNumOfSectors 0x0 High-order bytes == Low-order bytes !!! AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0x27, lba 0x0 count 0x0 feature 0x0 (ahci) UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0x27, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 27 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 0 TFD 0x0 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 High-order bytes == Low-order bytes !!! (2) Use IDE_COMMAND_READ_NATIVE_SIZE UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xf8, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x3 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 f8 00 00 00 00 e0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 0 TFD 0x0 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 NativeNumOfSectors 0x0 requested LunExt->GeomType=ffffffff tmp_cylinders = 0x1861 Geometry: C 0x1861 (0x1861) Geometry: H 0x10 (0x10) Geometry: S 0x3f (0x3f) InitBadBlocks local LunExt 0xb246e618 S/N:VBOX_HARDDISK___________________________-VB5c9e6d5f-644b3de6_ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: hard drive. IssueIdentify: final Status on exit (0x0) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found imp: 0xf & 0x4 AtapiEnableInterrupts_2: 1 WriteChannelPort4 fd4000ff => ch2[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x2, dev 0 AtapiDisableInterrupts_2: 0 WriteChannelPort4 0 => ch2[14] AtapiHwInitialize: IDE branch UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xc6, lba 0x0 bcount 0x0 feature 0x0, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 c6 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 0 Try Enable Read Cache UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0xaa, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 ef aa 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 Try Enable Write Cache UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xef, lba 0x0 bcount 0x0 feature 0x2, buff 0x0, len 0x0, WF 0x8 BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 ef 02 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 Try Enable Adv. Power Mgmt UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xef, lba 0x0 bcount 0x80 feature 0x5, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 ef 05 00 00 00 a0 00 00 00 00 80 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 40000000 CI 0x1 ReadChannelPort4 ch2[10] = 40000000 IS 0x40000000 WriteChannelPort4 40000000 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 441 TFD 0x441 ERROR 0x4 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x41, error 0x4 AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x441 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x300 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x1 AHCI2_0x3c (0xf77d523c) = 0x0 UniataAhciStop: lChan 2 ReadChannelPort4 ch2[18] = 1000c017 WriteChannelPort4 1000c016 => ch2[18] ReadChannelPort4 ch2[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 2 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch2[18] ReadChannelPort4 ch2[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 2 UniataAhciStartFR: lChan 2 ReadChannelPort4 ch2[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch2[18] UniataAhciStart: lChan 2 ReadChannelPort4 ch2[10] = 0 WriteChannelPort4 0 => ch2[10] SError 0x0, IS 0x0 ReadChannelPort4 ch2[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch2[18] AHCI port 2 Base: 0xf77d5200 MemIo 1 Proc 0 AHCI2_0x0 (0xf77d5200) = 0x4d69000 AHCI2_0x4 (0xf77d5204) = 0x0 AHCI2_0x8 (0xf77d5208) = 0x4d69400 AHCI2_0xc (0xf77d520c) = 0x0 AHCI2_0x10 (0xf77d5210) = 0x0 AHCI2_0x14 (0xf77d5214) = 0x0 AHCI2_0x18 (0xf77d5218) = 0x1000c017 AHCI2_0x1c (0xf77d521c) = 0x0 AHCI2_0x20 (0xf77d5220) = 0x441 AHCI2_0x24 (0xf77d5224) = 0x101 AHCI2_0x28 (0xf77d5228) = 0x123 AHCI2_0x2c (0xf77d522c) = 0x300 AHCI2_0x30 (0xf77d5230) = 0x0 AHCI2_0x34 (0xf77d5234) = 0x0 AHCI2_0x38 (0xf77d5238) = 0x0 AHCI2_0x3c (0xf77d523c) = 0x0 try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 IDE_STATUS_ERROR detected on entry, statusByte = 0x41 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 2/0 AtapiDisableInterrupts_2: 1 WriteChannelPort4 0 => ch2[14] UniataAhciSendPIOCommand: cntrlr 0x0:0x2 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 2 [0x0] Srb 0xb246fb98, AtaReq 0xb2695000, CMD 0xb2695080 ph 4f94080 AHCI setup FIS b2695080, ch 2, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2695000 AHCI AtaReq CMD 0xb2695080 (ph 0x4f94080) prd_length 0x0, flags 0x5, base 4f94080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] ReadChannelPort4 ch2[38] = 1 ReadChannelPort4 ch2[10] = 1 CI 0x1 ReadChannelPort4 ch2[10] = 1 IS 0x1 WriteChannelPort4 1 => ch2[10] UniataAhciStatus(2-2): hIS 0x0 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 0 TFD 0x0 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 imp: 0xf & 0x4 AtapiEnableInterrupts_2: 2 WriteChannelPort4 0 => ch2[14] Using 0x48 mode imp: 0xf & 0x4 AtapiEnableInterrupts_2: 1 WriteChannelPort4 fd4000ff => ch2[14] imp: 0xf & 0x8 AtapiChipInit: dev 0xffffffff, ph chan 3, c 3 HwFlags: 0x12000000 VendorID/DeviceID/Rev 0x8086/0x2829/0x2 AHCI single channel init UniataAhciReset: lChan 3 WriteChannelPort4 0 => ch3[14] UniataAhciHardReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1000c017 WriteChannelPort4 1000c016 => ch3[18] ReadChannelPort4 ch3[18] = 10004016 final CMD 0x10004016 UniataSataPhyEnable: SControl 0x0 UniataSataPhyEnable: retry init 0 SControl 00000001 UniataSataPhyEnable: retry idle 0 SControl 00000300 UniataSataConnect: SATA TransferMode 0x48 UniataSataConnect: OK, ATA status 0x31 UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 131 TFD 0x131 TFD 0x131 AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x1 AHCI3_0x14 (0xf77d5294) = 0x0 AHCI3_0x18 (0xf77d5298) = 0x10004016 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x131 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 ReadChannelPort4 ch3[24] = eb140101 sig: 0xeb140101 UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 1 WriteChannelPort4 1 => ch3[10] SError 0x0, IS 0x1 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] WriteChannelPort4 f900003f => ch3[14] UniataAhciSoftReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1000c017 WriteChannelPort4 1000c016 => ch3[18] ReadChannelPort4 ch3[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch3[18] ReadChannelPort4 ch3[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 3 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 signature 0xeb140101 ATAPI dev FindDevices: AtapiDisableInterrupts_3: 0 WriteChannelPort4 0 => ch3[14] max_ldev 1 CheckDevice: Device 0x0 SStatus 123 AHCI check ReadChannelPort4 ch3[24] = eb140101 ATAPI at home CheckDevice: reset AHCI dev UniataAhciSoftReset: lChan 3 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1000c017 WriteChannelPort4 1000c016 => ch3[18] ReadChannelPort4 ch3[18] = 10004016 final CMD 0x10004016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004006 => ch3[18] ReadChannelPort4 ch3[18] = 10000006 final CMD 0x10000006 UniataAhciCLO: lChan 3 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 10000006 CMD 0x10000006 WriteChannelPort4 10000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 10004016 CMD 0x10004016 WriteChannelPort4 10004017 => ch3[18] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciSendCommand: lChan 3 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] UniataAhciWaitReady: lChan 3 ReadChannelPort4 ch3[20] = 130 TFD 0x130 34 00 00 01 01 14 eb 00 00 00 00 00 01 00 00 00 00 00 00 00 IssueIdentify: Checking for ATAPI. Status (0x30) UniataAhciSendPIOCommand: cntrlr 0x0:0x3 dev 0x0, cmd 0xa1, lba 0x0 bcount 0x0 feature 0x0, buff 0xb246f2f8, len 0x200, WF 0x2 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb246fbd8, AtaReq 0xb2696000, CMD 0xb2696080 ph 0 AHCI setup FIS b2696080, ch 3, dev 0 27 80 a1 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 ahci_flags 0x5 assume IN AtapiDmaSetup: mode 0x48, data b246f2f8, count 200, lCh 3, dev 0 get Phys(AHCI_CMD=b2696080) AtapiVirtToPhysAddr_: b2696080 -> 00000000:04f95080 get Phys(data[0]=b246f2f8) AtapiVirtToPhysAddr_: b246f2f8 -> 00000000:04d6e2f8 set TERM ph data[0]=0:4d6e2f8 (1ff) AtapiDmaSetup: OK UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2696000 AHCI AtaReq CMD 0xb2696080 (ph 0x4f95080) prd_length 0x1, flags 0x5, base 4f95080 ReadChannelPort4 ch3[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 IssueIdentify: Status after read words 0x50 Model: BVXOC -DOR M FW: .1 0 S/N: BV-3a1b2c3d4 Pio: 0 APio: 3 SWDMA: 0 MWDMA: 0 UDMA: 40/7f SATA: 0 SATA support: 0, CAPs 0x104 OrigTransferMode: 48, Active: 48 Accoustic 0, cur 0 AdvPowerMode 0, cur 0 InitBadBlocks local LunExt 0xb246e920 S/N:VBOX_CD-ROM_____________________________-VB3-1a2b3c4d________ IssueIdentify: Device does not interrupt on assertion of DRQ. IssueIdentify: Device is CD/Optical drive. IssueIdentify: final Status on exit (0x50) CheckDevice: detected AHCI Device 0x0 CheckDevice: check status: found imp: 0xf & 0x8 AtapiEnableInterrupts_3: 1 WriteChannelPort4 fd4000ff => ch3[14] FindDevices: returning 1 (AHCI) AtapiHwInitialize: lChannel 0x3, dev 0 AtapiDisableInterrupts_3: 0 WriteChannelPort4 0 => ch3[14] AtapiHwInitialize: ATAPI/Changer branch try mode 0x48 AtapiDmaInit__: Set (U)DMA on Device 0 AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA AtapiDmaInit: LunExt->LimitedTransferMode 0x48 AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA => 0x6 SATA Generic LunExt->LimitedTransferMode 48, LunExt->OrigTransferMode 48 AtaSetTransferMode: Set 0x48 on Device 3/0 AtapiDisableInterrupts_3: 1 WriteChannelPort4 0 => ch3[14] UniataAhciSendPIOCommand: cntrlr 0x0:0x3 dev 0x0, cmd 0xef, lba 0x0 bcount 0x46 feature 0x3, buff 0x0, len 0x0, WF 0x8 length/DEV_BSIZE != bcount BuildAhciInternalSrb: lChan 3 [0x0] Srb 0xb246fbd8, AtaReq 0xb2696000, CMD 0xb2696080 ph 4f95080 AHCI setup FIS b2696080, ch 3, dev 0 27 80 ef 03 00 00 00 a0 00 00 00 00 46 00 00 80 00 00 00 00 ahci_flags 0x5 UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2696000 AHCI AtaReq CMD 0xb2696080 (ph 0x4f95080) prd_length 0x0, flags 0x5, base 4f95080 ReadChannelPort4 ch3[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch3[38] ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[10] = 1 CI 0x1 ReadChannelPort4 ch3[10] = 1 IS 0x1 WriteChannelPort4 1 => ch3[10] UniataAhciStatus(3-3): hIS 0x0 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 0 TFD 0x0 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 imp: 0xf & 0x8 AtapiEnableInterrupts_3: 2 WriteChannelPort4 0 => ch3[14] Using 0x48 mode imp: 0xf & 0x8 AtapiEnableInterrupts_3: 1 WriteChannelPort4 fd4000ff => ch3[14] AtapiHwInitialize: (base) done TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf7848f90, CDB 0xf7848fc0, AtaReq 0xb2459000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7848f90 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: BuildMechanismStatusSrb() MechanismStatusSrb 0xb2692044 AtapiSendCommand: AtapiSendCommand recursive AtapiSendCommand: req state 0x20, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692024, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692024) AtapiVirtToPhysAddr_: b2692024 -> 00000000:04f91024 set TERM ph data[0]=0:4f91024 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x0 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1000c017 CMD 0x1000c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 send CMD 0x1100c017, entries 0x1 WriteChannelPort4 1100c017 => ch0[18] WriteChannelPort4 1 => ch0[38] AtapiSendCommand: SRB_STATUS_PENDING (2) AtapiStartIo: next Srb f7848f90 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269202c, count 12, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269202c) AtapiVirtToPhysAddr_: b269202c -> 00000000:04f9102c set TERM ph data[0]=0:4f9102c (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x3 MechanismStatusSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692024, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692024) AtapiVirtToPhysAddr_: b2692024 -> 00000000:04f91024 set TERM ph data[0]=0:4f91024 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269202c, count 12, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269202c) AtapiVirtToPhysAddr_: b269202c -> 00000000:04f9102c set TERM ph data[0]=0:4f9102c (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x2 MechanismStatusSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692024, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692024) AtapiVirtToPhysAddr_: b2692024 -> 00000000:04f91024 set TERM ph data[0]=0:4f91024 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269202c, count 12, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269202c) AtapiVirtToPhysAddr_: b269202c -> 00000000:04f9102c set TERM ph data[0]=0:4f9102c (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x1 MechanismStatusSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692024, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692024) AtapiVirtToPhysAddr_: b2692024 -> 00000000:04f91024 set TERM ph data[0]=0:4f91024 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb2692044 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b2692074) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269202c, count 12, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269202c) AtapiVirtToPhysAddr_: b269202c -> 00000000:04f9102c set TERM ph data[0]=0:4f9102c (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2692074 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7848fc0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4c38, count 24, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4c38) AtapiVirtToPhysAddr_: f77d4c38 -> 00000000:04f91c38 set TERM ph data[0]=0:4f91c38 (23) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 12 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7848fc0 Command 0x12 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 12, WordsLeft 12 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 24, full size 24 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7848f90, status 1 AtapiInterrupt: RequestComplete, srb 0xf7848f90 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7848f90 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xf7848f90, CDB 0xf7848fc0, AtaReq 0xb2459000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7848f90 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848c78 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok SStatus 123 AHCI check ReadChannelPort4 ch1[24] = 101 AHCI HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7848f90 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b2692270, f7848f90) AtapiStartIo: UniataRemoveRequest(b2692270, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b2692270, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7848f90 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xf7848f90, CDB 0xf7848fc0, AtaReq 0xb2459000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7848f90 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848c78 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x2:0x0:0x0 IdeSendCommand: SCSIOP_INQUIRY ok SStatus 123 AHCI check ReadChannelPort4 ch2[24] = 101 AHCI HDD at home RelativeAddressing IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7848f90 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b26924d8, f7848f90) AtapiStartIo: UniataRemoveRequest(b26924d8, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b26924d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x1:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7848f90 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf7848f90, CDB 0xf7848fc0, AtaReq 0xb2459000, SCmd 0x12 UniataNeedQueueing: TopLevel, qd=0 Send to device 12 TopLevel (2), srb 0xf7848f90 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 12 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: BuildMechanismStatusSrb() MechanismStatusSrb 0xb269277c AtapiSendCommand: AtapiSendCommand recursive AtapiSendCommand: req state 0x20, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269275c, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269275c) AtapiVirtToPhysAddr_: b269275c -> 00000000:04f9175c set TERM ph data[0]=0:4f9175c (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x0 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1000c017 CMD 0x1000c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 send CMD 0x1100c017, entries 0x1 WriteChannelPort4 1100c017 => ch3[18] WriteChannelPort4 1 => ch3[38] AtapiSendCommand: SRB_STATUS_PENDING (2) AtapiStartIo: next Srb f7848f90 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692764, count 12, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692764) AtapiVirtToPhysAddr_: b2692764 -> 00000000:04f91764 set TERM ph data[0]=0:4f91764 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x3 MechanismStatusSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269275c, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269275c) AtapiVirtToPhysAddr_: b269275c -> 00000000:04f9175c set TERM ph data[0]=0:4f9175c (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692764, count 12, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692764) AtapiVirtToPhysAddr_: b2692764 -> 00000000:04f91764 set TERM ph data[0]=0:4f91764 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x2 MechanismStatusSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269275c, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269275c) AtapiVirtToPhysAddr_: b269275c -> 00000000:04f9175c set TERM ph data[0]=0:4f9175c (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692764, count 12, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692764) AtapiVirtToPhysAddr_: b2692764 -> 00000000:04f91764 set TERM ph data[0]=0:4f91764 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiInterrupt: MechStatusRetryCount 0x1 MechanismStatusSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b269275c, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b269275c) AtapiVirtToPhysAddr_: b269275c -> 00000000:04f9175c set TERM ph data[0]=0:4f9175c (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x12 RequestSenseSrb 0xb269277c AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b26927ac) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2692764, count 12, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2692764) AtapiVirtToPhysAddr_: b2692764 -> 00000000:04f91764 set TERM ph data[0]=0:4f91764 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b26927ac Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (1) AtapiInterrupt: send orig SRB_STATUS_PENDING (1) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 AtapiInterrupt: OriginalSrb != NULL AtapiInterrupt: ATAPI command status 0x1 AtapiSendCommand: req state 0x50, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f7848fc0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4c38, count 24, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4c38) AtapiVirtToPhysAddr_: f77d4c38 -> 00000000:04f91c38 set TERM ph data[0]=0:4f91c38 (23) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 12 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7848fc0 Command 0x12 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiInterrupt: chan->ExpectingInterrupt 1 (2) AtapiInterrupt: send orig SRB_STATUS_PENDING (2) AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 50 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 12, WordsLeft 12 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 24, full size 24 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7848f90, status 1 AtapiInterrupt: RequestComplete, srb 0xf7848f90 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x1:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7848f90 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x4:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: Communication port INQUIRY AtapiStartIo: Srb 0xf7848f90 complete with status 0x1 AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x4:0x1:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 AtapiStartIo: SRB rejected SRB_STATUS_SELECTION_TIMEOUT AtapiStartIo: Srb 0xf7848f90 complete with status 0xa AtapiStartIo: UniataRemoveRequest(0, f7848f90) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan 0, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request ScsiPortInitialize Status 0x0 Parameter IgnoreIsa Parameter IgnoreIsa = 0x0 ATAPI IDE: Look for ISA Controllers AtapiFindController: assume max PIO4 allocate 2 Luns for 1 channels AtapiSetupLunPtrs for channel 0 of 1, 2 luns Chan 0xb268a008 Lun 0x0 Lun ptr 0xb2457008 Lun 0x1 Lun ptr 0xb2457310 AtapiReadChipConfig: devExt 0xb268b7f4 AtapiReadChipConfig: dev 0xffffffff, ph chan -1 Parameter ForceSimplex Parameter ForceSimplex = 0x0 MaxTransferMode (base): 0xc Parameter MaxTransferMode Parameter MaxTransferMode = 0xc MaxTransferMode (overriden): 0xc Parameter AtapiDmaZeroTransfer Parameter AtapiDmaZeroTransfer = 0x0 Parameter AtapiDmaControlCmd Parameter AtapiDmaControlCmd = 0x0 Parameter AtapiDmaRawRead Parameter AtapiDmaRawRead = 0x0 Parameter AtapiDmaReadWrite Parameter AtapiDmaReadWrite = 0x1 AtapiChipInit: dev 0xffffffff, ph chan -1, c -1 HwFlags: 0x0 VendorID/DeviceID/Rev 0x0/0x0/0x0 Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1f0 BaseIoAddress2=3f6 AltStatus (0xff) Reg_0x1 (0x1f1) = 0xff Reg_0x2 (0x1f2) = 0xff Reg_0x3 (0x1f3) = 0xff Reg_0x4 (0x1f4) = 0xff Reg_0x5 (0x1f5) = 0xff Reg_0x6 (0x1f6) = 0xff Reg_0x7 (0x1f7) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=170 BaseIoAddress2=376 AltStatus (0xff) Reg_0x1 (0x171) = 0xff Reg_0x2 (0x172) = 0xff Reg_0x3 (0x173) = 0xff Reg_0x4 (0x174) = 0xff Reg_0x5 (0x175) = 0xff Reg_0x6 (0x176) = 0xff Reg_0x7 (0x177) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=1e8 BaseIoAddress2=3ee AltStatus (0xff) Reg_0x1 (0x1e9) = 0xff Reg_0x2 (0x1ea) = 0xff Reg_0x3 (0x1eb) = 0xff Reg_0x4 (0x1ec) = 0xff Reg_0x5 (0x1ed) = 0xff Reg_0x6 (0x1ee) = 0xff Reg_0x7 (0x1ef) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) Parameter PortBase Parameter PortBase = 0x0 Parameter Irq Parameter Irq = 0x0 BaseIoAddress1=168 BaseIoAddress2=36e AltStatus (0xff) Reg_0x1 (0x169) = 0xff Reg_0x2 (0x16a) = 0xff Reg_0x3 (0x16b) = 0xff Reg_0x4 (0x16c) = 0xff Reg_0x5 (0x16d) = 0xff Reg_0x6 (0x16e) = 0xff Reg_0x7 (0x16f) = 0xff BM_0x0 (0x0) = 0xa0 BM_0x1 (0x0) = 0xa0 BM_0x2 (0x0) = 0xa0 BM_0x3 (0x0) = 0xa0 AtapiFindController: Identifier read back from Master (0xff) AtapiFindController: Identifier read back from Slave (0xff) AtapiFindController: return SP_RETURN_NOT_FOUND ScsiPortInitialize Status 0xc00000c0 Parameter IgnoreMca Parameter IgnoreMca = 0x0 ATAPI IDE: Look for MCA Controllers ScsiPortInitialize Status 0xc00000c0 Leave UNIATA MiniPort DriverEntry with status 0x0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: UNIATA (../../ntoskrnl/io/iomgr/driver.c:1634) '\Driver\BUSLOGIC' initialization failed, status (0xc00000c0) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\BUSLOGIC' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: USBSTOR TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf7849360, CDB 0xf7849390, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7849360 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7849390) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4510, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4510) AtapiVirtToPhysAddr_: f77d4510 -> 00000000:04f8a510 set TERM ph data[0]=0:4f8a510 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7849390 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb f7849360 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 4, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8, full size 8 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7849360, status 1 AtapiInterrupt: RequestComplete, srb 0xf7849360 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf7849364, CDB 0xf7849394, AtaReq 0xb2459000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf7849364 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7849394) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4510, count 8, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4510) AtapiVirtToPhysAddr_: f77d4510 -> 00000000:04f8a510 set TERM ph data[0]=0:4f8a510 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7849394 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb f7849364 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 4, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8, full size 8 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7849364, status 1 AtapiInterrupt: RequestComplete, srb 0xf7849364 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f784941c) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4240, count 14, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4240) AtapiVirtToPhysAddr_: f77d4240 -> 00000000:04f89240 set TERM ph data[0]=0:4f89240 (13) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0x1a to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 1a 00 01 00 14 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 40000000 ReadChannelPort4 ch0[38] = 1 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 40000000 => ch0[10] AHCI: is=40000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x1 AHCI0_0x3c (0xf77d513c) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 5041 TFD 0x5041 ERROR 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x41, error 0x50 AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x1 AHCI0_0x3c (0xf77d513c) = 0x0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1100c017 WriteChannelPort4 1100c016 => ch0[18] ReadChannelPort4 ch0[18] = 11004016 final CMD 0x11004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004006 => ch0[18] ReadChannelPort4 ch0[18] = 11000006 final CMD 0x11000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 11000006 CMD 0x11000006 WriteChannelPort4 11000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004017 => ch0[18] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: ATAPI Entered with status (0x41) AHCI branch (ATAPI) AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 UniataAhciStop: lChan 0 ReadChannelPort4 ch0[18] = 1100c017 WriteChannelPort4 1100c016 => ch0[18] ReadChannelPort4 ch0[18] = 11004016 final CMD 0x11004016 UniataAhciStopFR: lChan 0 ReadChannelPort4 ch0[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004006 => ch0[18] ReadChannelPort4 ch0[18] = 11000006 final CMD 0x11000006 UniataAhciCLO: lChan 0 UniataAhciStartFR: lChan 0 ReadChannelPort4 ch0[18] = 11000006 CMD 0x11000006 WriteChannelPort4 11000016 => ch0[18] UniataAhciStart: lChan 0 ReadChannelPort4 ch0[10] = 0 WriteChannelPort4 0 => ch0[10] SError 0x0, IS 0x0 ReadChannelPort4 ch0[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004017 => ch0[18] ReadChannelPort4 ch0[38] = 0 CI 0x0 ReadChannelPort4 ch0[10] = 0 IS 0x0 WriteChannelPort4 0 => ch0[10] AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 0 Base: 0xf77d5100 MemIo 1 Proc 0 AHCI0_0x0 (0xf77d5100) = 0x4d6b000 AHCI0_0x4 (0xf77d5104) = 0x0 AHCI0_0x8 (0xf77d5108) = 0x4d6b400 AHCI0_0xc (0xf77d510c) = 0x0 AHCI0_0x10 (0xf77d5110) = 0x0 AHCI0_0x14 (0xf77d5114) = 0xfd4000ff AHCI0_0x18 (0xf77d5118) = 0x1100c017 AHCI0_0x1c (0xf77d511c) = 0x0 AHCI0_0x20 (0xf77d5120) = 0x5041 AHCI0_0x24 (0xf77d5124) = 0xeb140101 AHCI0_0x28 (0xf77d5128) = 0x123 AHCI0_0x2c (0xf77d512c) = 0x300 AHCI0_0x30 (0xf77d5130) = 0x0 AHCI0_0x34 (0xf77d5134) = 0x0 AHCI0_0x38 (0xf77d5138) = 0x0 AHCI0_0x3c (0xf77d513c) = 0x0 AtapiInterrupt: Error 0x50 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x50 ATAPI: Illegal request AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xf78493ec, status 4 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb268a1d0, CDB 0xb268a200, AtaReq 0xb2459000, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb268a1d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268a200) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d3220, count 12, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d3220) AtapiVirtToPhysAddr_: f77d3220 -> 00000000:04f89220 set TERM ph data[0]=0:4f89220 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b268a200 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x41 ReadChannelPort4 ch0[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b268a1d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb268a1d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb268a1d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f784941c) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4240, count 18, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4240) AtapiVirtToPhysAddr_: f77d4240 -> 00000000:04f89240 set TERM ph data[0]=0:4f89240 (17) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0x5a to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 5a 00 01 00 00 00 00 00 18 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8, WordsLeft c AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xf78493ec, status 12 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0xbe UniataNeedQueueing: TopLevel, qd=0 Send to device be TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send be AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f784941c) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd be AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0xbe to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI be 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf78493ec, status 1 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf7849360, CDB 0xf7849390, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7849360 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 25 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f7849390) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4510, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4510) AtapiVirtToPhysAddr_: f77d4510 -> 00000000:04f8a510 set TERM ph data[0]=0:4f8a510 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 25 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7849390 Command 0x25 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb f7849360 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 4, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8, full size 8 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7849360, status 1 AtapiInterrupt: RequestComplete, srb 0xf7849360 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf7849364, CDB 0xf7849394, AtaReq 0xb2459000, SCmd 0xbd UniataNeedQueueing: TopLevel, qd=0 Send to device bd TopLevel (2), srb 0xf7849364 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send bd AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f7849394) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4510, count 8, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4510) AtapiVirtToPhysAddr_: f77d4510 -> 00000000:04f8a510 set TERM ph data[0]=0:4f8a510 (7) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd bd REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f7849394 Command 0xbd to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI bd 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb f7849364 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 4, WordsLeft 4 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 8, full size 8 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf7849364, status 1 AtapiInterrupt: RequestComplete, srb 0xf7849364 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 1a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f784941c) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d46e0, count 14, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d46e0) AtapiVirtToPhysAddr_: f77d46e0 -> 00000000:04f896e0 set TERM ph data[0]=0:4f896e0 (13) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 1a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0x1a to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 1a 00 01 00 14 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 40000000 ReadChannelPort4 ch3[38] = 1 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 40000000 => ch3[10] AHCI: is=40000000 ss=00000123 serror=00000000 CI=00000001, ACT=00000000 AHCI: complete mask 0x0 AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x1 AHCI3_0x3c (0xf77d52bc) = 0x0 AHCI: unexpected, error AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 5041 TFD 0x5041 ERROR 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 1 Incomplete command, CI 0x1, ACT 0x0 FIS status 0x41, error 0x50 AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x1 AHCI3_0x3c (0xf77d52bc) = 0x0 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1100c017 WriteChannelPort4 1100c016 => ch3[18] ReadChannelPort4 ch3[18] = 11004016 final CMD 0x11004016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004006 => ch3[18] ReadChannelPort4 ch3[18] = 11000006 final CMD 0x11000006 UniataAhciCLO: lChan 3 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 11000006 CMD 0x11000006 WriteChannelPort4 11000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004017 => ch3[18] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 Err intr (0x40000000), SE (0x0) AtapiInterrupt: ATAPI Entered with status (0x41) AHCI branch (ATAPI) AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 UniataAhciStop: lChan 3 ReadChannelPort4 ch3[18] = 1100c017 WriteChannelPort4 1100c016 => ch3[18] ReadChannelPort4 ch3[18] = 11004016 final CMD 0x11004016 UniataAhciStopFR: lChan 3 ReadChannelPort4 ch3[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004006 => ch3[18] ReadChannelPort4 ch3[18] = 11000006 final CMD 0x11000006 UniataAhciCLO: lChan 3 UniataAhciStartFR: lChan 3 ReadChannelPort4 ch3[18] = 11000006 CMD 0x11000006 WriteChannelPort4 11000016 => ch3[18] UniataAhciStart: lChan 3 ReadChannelPort4 ch3[10] = 0 WriteChannelPort4 0 => ch3[10] SError 0x0, IS 0x0 ReadChannelPort4 ch3[18] = 11004016 CMD 0x11004016 WriteChannelPort4 11004017 => ch3[18] ReadChannelPort4 ch3[38] = 0 CI 0x0 ReadChannelPort4 ch3[10] = 0 IS 0x0 WriteChannelPort4 0 => ch3[10] AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AHCI port 3 Base: 0xf77d5280 MemIo 1 Proc 0 AHCI3_0x0 (0xf77d5280) = 0x4f8d000 AHCI3_0x4 (0xf77d5284) = 0x0 AHCI3_0x8 (0xf77d5288) = 0x4f8d400 AHCI3_0xc (0xf77d528c) = 0x0 AHCI3_0x10 (0xf77d5290) = 0x0 AHCI3_0x14 (0xf77d5294) = 0xfd4000ff AHCI3_0x18 (0xf77d5298) = 0x1100c017 AHCI3_0x1c (0xf77d529c) = 0x0 AHCI3_0x20 (0xf77d52a0) = 0x5041 AHCI3_0x24 (0xf77d52a4) = 0xeb140101 AHCI3_0x28 (0xf77d52a8) = 0x123 AHCI3_0x2c (0xf77d52ac) = 0x300 AHCI3_0x30 (0xf77d52b0) = 0x0 AHCI3_0x34 (0xf77d52b4) = 0x0 AHCI3_0x38 (0xf77d52b8) = 0x0 AHCI3_0x3c (0xf77d52bc) = 0x0 AtapiInterrupt: Error 0x50 Bad Lba 0x0 no wait ready after error Intr on DRQ 0 AtapiInterrupt: ATAPI Error, int reason 1 Errors in PIO mode AtapiInterrupt: Error AtapiInterrupt: CompleteRequest, srbstatus 4 AtapiInterrupt: Error. Begin mapping... MapError: Error register is 0x50 ATAPI: Illegal request AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xf78493ec, status 4 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xb268a670, CDB 0xb268a6a0, AtaReq 0xb2459000, SCmd 0x3 UniataNeedQueueing: TopLevel, qd=0 Send to device 3 TopLevel (2), srb 0xb268a670 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 3 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b268a6a0) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d36c0, count 12, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d36c0) AtapiVirtToPhysAddr_: f77d36c0 -> 00000000:04f896c0 set TERM ph data[0]=0:4f896c0 (11) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 3 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b268a6a0 Command 0x3 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x41 ReadChannelPort4 ch3[38] = 0 continue with SCSIOP_REQUEST_SENSE AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 03 00 00 00 12 00 00 00 00 08 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb b268a670 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 9, WordsLeft 9 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 12, full size 12 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb268a670, status 1 AtapiInterrupt: RequestComplete, srb 0xb268a670 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0x5a UniataNeedQueueing: TopLevel, qd=0 Send to device 5a TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 5a AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f784941c) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d46e0, count 18, lCh 3, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d46e0) AtapiVirtToPhysAddr_: f77d46e0 -> 00000000:04f896e0 set TERM ph data[0]=0:4f896e0 (17) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 5a REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0x5a to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI 5a 00 01 00 00 00 00 00 18 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8, WordsLeft c AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xf78493ec, status 12 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x3:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x8 SRB 0xf78493ec, CDB 0xf784941c, AtaReq 0xb2459000, SCmd 0xbe UniataNeedQueueing: TopLevel, qd=0 Send to device be TopLevel (2), srb 0xf78493ec TopLevel (3), AtaReq 0xb2459000 Try ATAPI send be AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f784941c) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 3, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd be AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb f784941c Command 0xbe to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch3[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 3, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch3[18] = 1100c017 CMD 0x1100c017 ATAPI be 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch3[38] AtapiStartIo: next Srb f78493ec AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 1 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 1 => ch3[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 3 ReadChannelPort4 ch3[20] = 50 TFD 0x50 ReadChannelPort4 ch3[34] = 0 ReadChannelPort4 ch3[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xf78493ec, status 1 AtapiInterrupt: RequestComplete, srb 0xf78493ec AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=8 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x3 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x8 UniataAhciStatus(3-3): hIS 0x8 ReadChannelPort4 ch3[10] = 0 ReadChannelPort4 ch3[38] = 0 ReadChannelPort4 ch3[34] = 0 WriteChannelPort4 0 => ch3[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:3, irql 0x10, c 3 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: CDROM TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xf784929c, CDB 0xf78492cc, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf784929c TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849010 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf784929c complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b2692270, f784929c) AtapiStartIo: UniataRemoveRequest(b2692270, f784929c) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b2692270, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xf784929c, CDB 0xf78492cc, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf784929c TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849010 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x1:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf784929c complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b2692270, f784929c) AtapiStartIo: UniataRemoveRequest(b2692270, f784929c) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b2692270, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xf78492c0, CDB 0xf78492f0, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78492c0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849028 ** Ide: Command AtaReq 0xb2459000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x28a2 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78492c0 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b2692270, f78492c0) AtapiStartIo: UniataRemoveRequest(b2692270, f78492c0) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b2692270, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848ef8 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04d55000 set TERM ph data[0]=0:4d55000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e08 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04d55000 set TERM ph data[0]=0:4d55000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xf7848f40, CDB 0xf7848f70, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7848f40 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848ca8 ** Ide: Command AtaReq 0xb2459000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x1:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x28a2 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7848f40 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b2692270, f7848f40) AtapiStartIo: UniataRemoveRequest(b2692270, f7848f40) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b2692270, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e70 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4008, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4008) AtapiVirtToPhysAddr_: f77d4008 -> 00000000:04d55008 set TERM ph data[0]=0:4d55008 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e80 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04d55000 set TERM ph data[0]=0:4d55000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xf784929c, CDB 0xf78492cc, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf784929c TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849010 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x2:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf784929c complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b26924d8, f784929c) AtapiStartIo: UniataRemoveRequest(b26924d8, f784929c) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b26924d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xf784929c, CDB 0xf78492cc, AtaReq 0xb2459000, SCmd 0x1a UniataNeedQueueing: TopLevel, qd=0 Send to device 1a TopLevel (2), srb 0xf784929c TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849010 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x2:0x0:0x0 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf784929c complete with status 0x6 AtapiStartIo: AtapiDmaDBSync(b26924d8, f784929c) AtapiStartIo: UniataRemoveRequest(b26924d8, f784929c) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b26924d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xf78492c0, CDB 0xf78492f0, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf78492c0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849028 ** Ide: Command AtaReq 0xb2459000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x2:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1861 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf78492c0 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b26924d8, f78492c0) AtapiStartIo: UniataRemoveRequest(b26924d8, f78492c0) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b26924d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848ef8 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04f88000 set TERM ph data[0]=0:4f88000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e08 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04f88000 set TERM ph data[0]=0:4f88000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xf7848f40, CDB 0xf7848f70, AtaReq 0xb2459000, SCmd 0x25 UniataNeedQueueing: TopLevel, qd=0 Send to device 25 TopLevel (2), srb 0xf7848f40 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848ca8 ** Ide: Command AtaReq 0xb2459000 ** --- ** ** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x2:0x0:0x0 ** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1861 IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE AtapiStartIo: Srb 0xf7848f40 complete with status 0x1 AtapiStartIo: AtapiDmaDBSync(b26924d8, f7848f40) AtapiStartIo: UniataRemoveRequest(b26924d8, f7848f40) AtapiStartIo: ScsiPortNotification AtapiStartIo: UniataGetCurRequest AtapiStartIo: chan b26924d8, Src 0 AtapiStartIo: next Srb 0 AtapiStartIo: query PORT for next request TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e70 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4648, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4648) AtapiVirtToPhysAddr_: f77d4648 -> 00000000:04d56648 set TERM ph data[0]=0:4d56648 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7848e80 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77d4000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77d4000) AtapiVirtToPhysAddr_: f77d4000 -> 00000000:04f88000 set TERM ph data[0]=0:4f88000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: DISK (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: RAMDISK (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: KSECDD (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: NMIDEBUG (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: CDFS (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\CDFS' (../../ntoskrnl/mm/ARM3/sysldr.c:954) Leaking driver: cdfs.sys (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: NDIS (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'pci' for critical device '*PNP0A03' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../hal/halx86/legacy/halpnpdd.c:716) Start device received (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'VBE' for critical device 'PCI#CC_0300' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbohci' for critical device 'PCI#CC_0C0310' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbehci' for critical device 'PCI#CC_0C0320' (../../ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (../../drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x6 on bus 0x0 (../../drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x6 on bus 0x0: [Bus master] [Memory space enable] (../../drivers/usb/usbohci/hardware.cpp:383) Starting Controller (../../drivers/usb/usbohci/hardware.cpp:526) Controller State 0 (../../drivers/usb/usbohci/hardware.cpp:558) Waiting 50 milliseconds for controller to transition state (../../drivers/usb/usbohci/hardware.cpp:620) FrameInterval 80000000 IntervalValue 2edf (../../drivers/usb/usbohci/hardware.cpp:622) Computed FrameInterval a7782edf (../../drivers/usb/usbohci/hardware.cpp:630) Read FrameInterval a7782edf (../../drivers/usb/usbohci/hardware.cpp:637) Computed Periodic Start 2a2f (../../drivers/usb/usbohci/hardware.cpp:640) Read Periodic Start 2a2f (../../drivers/usb/usbohci/hardware.cpp:683) NumberOfPorts 8 (../../drivers/usb/usbohci/hardware.cpp:704) Descriptor A: 1108 (../../drivers/usb/usbohci/hardware.cpp:723) Descriptor B: 1fe0000 (../../drivers/usb/usbohci/hardware.cpp:733) HCCA: 106000 Alignment mask: ffffff00 (../../drivers/usb/usbohci/hardware.cpp:773) Control 2bf (../../drivers/usb/usbohci/hardware.cpp:778) OHCI controller is operational (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-0 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1138) Waiting 100 milliseconds for port to stabilize after connection (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../drivers/usb/usbohci/hardware.cpp:1209) Waiting 0 milliseconds for port power up (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: usbhub (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: usbohci (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../lib/drivers/libusb/libusb.cpp:33) USBLIB_AddDevice (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (../../drivers/bus/pci/pdo.c:1272) Assigning IRQ 10 to PCI device 0xb on bus 0x0 (../../drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0xb on bus 0x0: [Bus master] [Memory space enable] (../../drivers/usb/usbehci/hardware.cpp:367) Controller Capabilities Length 0x20 (../../drivers/usb/usbehci/hardware.cpp:368) Controller EHCI Version 0x100 (../../drivers/usb/usbehci/hardware.cpp:369) Controller EHCI Caps HCSParamsLong 0x8 (../../drivers/usb/usbehci/hardware.cpp:370) Controller EHCI Caps HCCParamsLong 0x84 (../../drivers/usb/usbehci/hardware.cpp:371) Controller has 8 Ports (../../drivers/usb/usbehci/hardware.cpp:256) Controller Port Routing Rules 0 (../../drivers/usb/usbehci/hardware.cpp:257) Number of Ports per Companion Controller 0 (../../drivers/usb/usbehci/hardware.cpp:258) Number of Companion Controller 0 (../../drivers/usb/usbehci/hardware.cpp:277) Controller supports Asynchronous Schedule Park (../../drivers/usb/usbehci/hardware.cpp:489) Starting Controller (../../drivers/usb/usbehci/hardware.cpp:714) Interrupt Mask 37 (../../drivers/usb/usbehci/hardware.cpp:813) UsbSts c000 (../../drivers/usb/usbehci/hardware.cpp:816) UsbCmd.PeriodicEnable 1 (../../drivers/usb/usbehci/hardware.cpp:817) UsbCmd.AsyncEnable 1 (../../drivers/usb/usbehci/hardware.cpp:818) UsbCmd.IntThreshold 8 (../../drivers/usb/usbehci/hardware.cpp:819) UsbCmd.Run 1 (../../drivers/usb/usbehci/hardware.cpp:820) UsbCmd.FrameListSize 0 (../../drivers/usb/usbehci/hardware.cpp:827) EHCI Started! (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../lib/drivers/libusb/hub_controller.cpp:3938) CHubController::CreatePDO: DeviceName \Device\USBPDO-1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'usbhub' for critical device 'USB#ROOT_HUB20' (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../drivers/usb/usbhub/fdo.c:1641) Status 0, Result 0x00000040 (../../drivers/usb/usbhub/fdo.c:1642) InformationLevel 0 (../../drivers/usb/usbhub/fdo.c:1643) ActualLength 40 (../../drivers/usb/usbhub/fdo.c:1644) PortNumber 0 (../../drivers/usb/usbhub/fdo.c:1645) DeviceDescriptor 20000112 (../../drivers/usb/usbhub/fdo.c:1646) HubAddress 0 (../../drivers/usb/usbhub/fdo.c:1647) NumberofPipes 0 (../../drivers/usb/usbhub/fdo.c:1740) HubDeviceExtension->UsbExtHubInfo.NumberOfPorts 8 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: usbhub (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: usbehci (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: pci (../../ntoskrnl/mm/ARM3/sysldr.c:3024) ZwOpenFile failed for '\SystemRoot\system32\drivers\vbemp.sys' with status 0xc000003a TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849538 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca3c8, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca3c8) AtapiVirtToPhysAddr_: f77ca3c8 -> 00000000:04d523c8 set TERM ph data[0]=0:4d523c8 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849438 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:04f82000 set TERM ph data[0]=0:4f82000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78494a0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca198, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca198) AtapiVirtToPhysAddr_: f77ca198 -> 00000000:04d52198 set TERM ph data[0]=0:4d52198 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849588 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:04f82000 set TERM ph data[0]=0:4f82000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78495f0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca198, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca198) AtapiVirtToPhysAddr_: f77ca198 -> 00000000:04d52198 set TERM ph data[0]=0:4d52198 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(0)partition(1), DeviceStringW : \Device\Harddisk0\Partition1 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(0)partition(2), DeviceStringW : \Device\Harddisk0\Partition2 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(0)partition(3), DeviceStringW : \Device\Harddisk0\Partition3 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(0)partition(4), DeviceStringW : \Device\Harddisk0\Partition4 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849538 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca198, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca198) AtapiVirtToPhysAddr_: f77ca198 -> 00000000:04d52198 set TERM ph data[0]=0:4d52198 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849438 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:04f82000 set TERM ph data[0]=0:4f82000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78494a0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77cae00, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77cae00) AtapiVirtToPhysAddr_: f77cae00 -> 00000000:04d51e00 set TERM ph data[0]=0:4d51e00 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849588 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:04f82000 set TERM ph data[0]=0:4f82000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78495f0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca198, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca198) AtapiVirtToPhysAddr_: f77ca198 -> 00000000:04d52198 set TERM ph data[0]=0:4d52198 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(1)partition(1), DeviceStringW : \Device\Harddisk1\Partition1 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(1)partition(2), DeviceStringW : \Device\Harddisk1\Partition2 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(1)partition(3), DeviceStringW : \Device\Harddisk1\Partition3 (../../ntoskrnl/io/iomgr/arcname.c:787) ArcNameStringW : \ArcName\multi(0)disk(0)rdisk(1)partition(4), DeviceStringW : \Device\Harddisk1\Partition4 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca008, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca008) AtapiVirtToPhysAddr_: f77ca008 -> 00000000:04d51008 set TERM ph data[0]=0:4d51008 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/iomgr/arcname.c:386) Boot device found (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'i8042prt' for critical device '*PNP0303' (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'i8042prt' for critical device '*PNP0F13' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x43 UniataNeedQueueing: TopLevel, qd=0 Send to device 43 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 43 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 43 (Cdb b2453600) assume IN AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data b2683cd8, count 324, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=b2683cd8) AtapiVirtToPhysAddr_: b2683cd8 -> 00000000:04f82cd8 set TERM ph data[0]=0:4f82cd8 (323) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 43 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x43 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 43 02 00 00 00 00 00 03 24 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered a, WordsLeft 192 AtapiInterrupt: CompleteRequest, srbstatus 1 WordsLeft 0x188 -> SRB_STATUS_DATA_OVERRUN AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 188 AtapiInterrupt: RequestComplete AtapiInterrupt: remove srb 0xb24535d0, status 12 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca318, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca318) AtapiVirtToPhysAddr_: f77ca318 -> 00000000:04d51318 set TERM ph data[0]=0:4d51318 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca318, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca318) AtapiVirtToPhysAddr_: f77ca318 -> 00000000:04d51318 set TERM ph data[0]=0:4d51318 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 11 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca318, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca318) AtapiVirtToPhysAddr_: f77ca318 -> 00000000:04d51318 set TERM ph data[0]=0:4d51318 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 12 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ca318, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ca318) AtapiVirtToPhysAddr_: f77ca318 -> 00000000:04d51318 set TERM ph data[0]=0:4d51318 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 13 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2453600) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f778b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:001c3000 ph data[0]=0:1c3000 (fff) get Phys(data[n=1]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:001c5000 ph data[1]=0:1c5000 (fff) get Phys(data[n=2]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:001c6000 ph data[1]=0:1c5000 (1fff) get Phys(data[n=2]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:001c7000 ph data[1]=0:1c5000 (2fff) get Phys(data[n=2]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:001c8000 ph data[1]=0:1c5000 (3fff) get Phys(data[n=2]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:001c9000 ph data[1]=0:1c5000 (4fff) get Phys(data[n=2]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:001ca000 ph data[1]=0:1c5000 (5fff) get Phys(data[n=2]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:0018b000 ph data[2]=0:18b000 (fff) get Phys(data[n=3]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:0018c000 ph data[2]=0:18b000 (1fff) get Phys(data[n=3]=f7794000) AtapiVirtToPhysAddr_: f7794000 -> 00000000:0018d000 ph data[2]=0:18b000 (2fff) get Phys(data[n=3]=f7795000) AtapiVirtToPhysAddr_: f7795000 -> 00000000:0018e000 ph data[2]=0:18b000 (3fff) get Phys(data[n=3]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:0018f000 ph data[2]=0:18b000 (4fff) get Phys(data[n=3]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:00190000 ph data[2]=0:18b000 (5fff) get Phys(data[n=3]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:00191000 ph data[2]=0:18b000 (6fff) get Phys(data[n=3]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:00192000 ph data[2]=0:18b000 (7fff) get Phys(data[n=3]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:00193000 set TERM ph data[2]=0:18b000 (8fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B2457168 TransferBufferLength 32 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 1, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:315) [USBEHCI] SCE Request B2453760 TransferBufferLength 32 Flags 3 MDL 00000000 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../drivers/usb/usbohci/hardware.cpp:1395) Disabling status change interrupt TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:00194000 ph data[0]=0:194000 (fff) get Phys(data[n=1]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00195000 ph data[0]=0:194000 (1fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00196000 ph data[0]=0:194000 (2fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00197000 ph data[0]=0:194000 (3fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00198000 ph data[0]=0:194000 (4fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00199000 ph data[0]=0:194000 (5fff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:0019a000 ph data[0]=0:194000 (6fff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:001db000 ph data[1]=0:1db000 (fff) get Phys(data[n=2]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:001dc000 ph data[1]=0:1db000 (1fff) get Phys(data[n=2]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:001dd000 ph data[1]=0:1db000 (2fff) get Phys(data[n=2]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:001de000 ph data[1]=0:1db000 (3fff) get Phys(data[n=2]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:0019f000 ph data[2]=0:19f000 (fff) get Phys(data[n=3]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:001a0000 ph data[2]=0:19f000 (1fff) get Phys(data[n=3]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:001a1000 ph data[2]=0:19f000 (2fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:001a2000 ph data[2]=0:19f000 (3fff) get Phys(data[n=3]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:001a3000 set TERM ph data[2]=0:19f000 (4fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 20 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../drivers/usb/usbohci/hardware.cpp:1514) Port 0 completed reset TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ab000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:001a4000 ph data[0]=0:1a4000 (fff) get Phys(data[n=1]=f77ac000) AtapiVirtToPhysAddr_: f77ac000 -> 00000000:001a5000 ph data[0]=0:1a4000 (1fff) get Phys(data[n=1]=f77ad000) AtapiVirtToPhysAddr_: f77ad000 -> 00000000:001a6000 ph data[0]=0:1a4000 (2fff) get Phys(data[n=1]=f77ae000) AtapiVirtToPhysAddr_: f77ae000 -> 00000000:001a7000 ph data[0]=0:1a4000 (3fff) get Phys(data[n=1]=f77af000) AtapiVirtToPhysAddr_: f77af000 -> 00000000:001a8000 ph data[0]=0:1a4000 (4fff) get Phys(data[n=1]=f77b0000) AtapiVirtToPhysAddr_: f77b0000 -> 00000000:001a9000 ph data[0]=0:1a4000 (5fff) get Phys(data[n=1]=f77b1000) AtapiVirtToPhysAddr_: f77b1000 -> 00000000:001aa000 ph data[0]=0:1a4000 (6fff) get Phys(data[n=1]=f77b2000) AtapiVirtToPhysAddr_: f77b2000 -> 00000000:001ab000 ph data[0]=0:1a4000 (7fff) get Phys(data[n=1]=f77b3000) AtapiVirtToPhysAddr_: f77b3000 -> 00000000:001ac000 ph data[0]=0:1a4000 (8fff) get Phys(data[n=1]=f77b4000) AtapiVirtToPhysAddr_: f77b4000 -> 00000000:001ad000 ph data[0]=0:1a4000 (9fff) get Phys(data[n=1]=f77b5000) AtapiVirtToPhysAddr_: f77b5000 -> 00000000:001ae000 ph data[0]=0:1a4000 (afff) get Phys(data[n=1]=f77b6000) AtapiVirtToPhysAddr_: f77b6000 -> 00000000:001af000 ph data[0]=0:1a4000 (bfff) get Phys(data[n=1]=f77b7000) AtapiVirtToPhysAddr_: f77b7000 -> 00000000:001b0000 ph data[0]=0:1a4000 (cfff) get Phys(data[n=1]=f77b8000) AtapiVirtToPhysAddr_: f77b8000 -> 00000000:001b1000 ph data[0]=0:1a4000 (dfff) get Phys(data[n=1]=f77b9000) AtapiVirtToPhysAddr_: f77b9000 -> 00000000:001b2000 ph data[0]=0:1a4000 (efff) get Phys(data[n=1]=f77ba000) AtapiVirtToPhysAddr_: f77ba000 -> 00000000:001b3000 set TERM ph data[0]=0:1a4000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 40 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bb000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bb000) AtapiVirtToPhysAddr_: f77bb000 -> 00000000:001b4000 ph data[0]=0:1b4000 (fff) get Phys(data[n=1]=f77bc000) AtapiVirtToPhysAddr_: f77bc000 -> 00000000:001b5000 ph data[0]=0:1b4000 (1fff) get Phys(data[n=1]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:001b6000 ph data[0]=0:1b4000 (2fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:001b7000 ph data[0]=0:1b4000 (3fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:001b8000 ph data[0]=0:1b4000 (4fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:001b9000 ph data[0]=0:1b4000 (5fff) get Phys(data[n=1]=f77c1000) AtapiVirtToPhysAddr_: f77c1000 -> 00000000:001ba000 ph data[0]=0:1b4000 (6fff) get Phys(data[n=1]=f77c2000) AtapiVirtToPhysAddr_: f77c2000 -> 00000000:001bb000 ph data[0]=0:1b4000 (7fff) get Phys(data[n=1]=f77c3000) AtapiVirtToPhysAddr_: f77c3000 -> 00000000:001bc000 ph data[0]=0:1b4000 (8fff) get Phys(data[n=1]=f77c4000) AtapiVirtToPhysAddr_: f77c4000 -> 00000000:001bd000 ph data[0]=0:1b4000 (9fff) get Phys(data[n=1]=f77c5000) AtapiVirtToPhysAddr_: f77c5000 -> 00000000:001be000 ph data[0]=0:1b4000 (afff) get Phys(data[n=1]=f77c6000) AtapiVirtToPhysAddr_: f77c6000 -> 00000000:001bf000 ph data[0]=0:1b4000 (bfff) get Phys(data[n=1]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:007c0000 ph data[1]=0:7c0000 (fff) get Phys(data[n=2]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:00141000 ph data[2]=0:141000 (fff) get Phys(data[n=3]=f77c9000) AtapiVirtToPhysAddr_: f77c9000 -> 00000000:00182000 ph data[3]=0:182000 (fff) get Phys(data[n=4]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:00183000 set TERM ph data[3]=0:182000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 60 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f778b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:00184000 ph data[0]=0:184000 (fff) get Phys(data[n=1]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:00185000 ph data[0]=0:184000 (1fff) get Phys(data[n=1]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:00186000 ph data[0]=0:184000 (2fff) get Phys(data[n=1]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:00187000 ph data[0]=0:184000 (3fff) get Phys(data[n=1]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:00188000 ph data[0]=0:184000 (4fff) get Phys(data[n=1]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:00189000 ph data[0]=0:184000 (5fff) get Phys(data[n=1]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:0018a000 ph data[0]=0:184000 (6fff) get Phys(data[n=1]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:0014b000 ph data[1]=0:14b000 (fff) get Phys(data[n=2]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:0014c000 ph data[1]=0:14b000 (1fff) get Phys(data[n=2]=f7794000) AtapiVirtToPhysAddr_: f7794000 -> 00000000:0014d000 ph data[1]=0:14b000 (2fff) get Phys(data[n=2]=f7795000) AtapiVirtToPhysAddr_: f7795000 -> 00000000:0014e000 ph data[1]=0:14b000 (3fff) get Phys(data[n=2]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:0014f000 ph data[1]=0:14b000 (4fff) get Phys(data[n=2]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:00150000 ph data[1]=0:14b000 (5fff) get Phys(data[n=2]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:00151000 ph data[1]=0:14b000 (6fff) get Phys(data[n=2]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:00152000 ph data[1]=0:14b000 (7fff) get Phys(data[n=2]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:00153000 set TERM ph data[1]=0:14b000 (8fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 80 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:00154000 ph data[0]=0:154000 (fff) get Phys(data[n=1]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00155000 ph data[0]=0:154000 (1fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00156000 ph data[0]=0:154000 (2fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00157000 ph data[0]=0:154000 (3fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00158000 ph data[0]=0:154000 (4fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00159000 ph data[0]=0:154000 (5fff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:0015a000 ph data[0]=0:154000 (6fff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:0019b000 ph data[1]=0:19b000 (fff) get Phys(data[n=2]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:0019c000 ph data[1]=0:19b000 (1fff) get Phys(data[n=2]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:0019d000 ph data[1]=0:19b000 (2fff) get Phys(data[n=2]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:0019e000 ph data[1]=0:19b000 (3fff) get Phys(data[n=2]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:0015f000 ph data[2]=0:15f000 (fff) get Phys(data[n=3]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:00160000 ph data[2]=0:15f000 (1fff) get Phys(data[n=3]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:00161000 ph data[2]=0:15f000 (2fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00162000 ph data[2]=0:15f000 (3fff) get Phys(data[n=3]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:00163000 set TERM ph data[2]=0:15f000 (4fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 a0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ab000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:00164000 ph data[0]=0:164000 (fff) get Phys(data[n=1]=f77ac000) AtapiVirtToPhysAddr_: f77ac000 -> 00000000:00165000 ph data[0]=0:164000 (1fff) get Phys(data[n=1]=f77ad000) AtapiVirtToPhysAddr_: f77ad000 -> 00000000:00166000 ph data[0]=0:164000 (2fff) get Phys(data[n=1]=f77ae000) AtapiVirtToPhysAddr_: f77ae000 -> 00000000:00167000 ph data[0]=0:164000 (3fff) get Phys(data[n=1]=f77af000) AtapiVirtToPhysAddr_: f77af000 -> 00000000:00168000 ph data[0]=0:164000 (4fff) get Phys(data[n=1]=f77b0000) AtapiVirtToPhysAddr_: f77b0000 -> 00000000:00169000 ph data[0]=0:164000 (5fff) get Phys(data[n=1]=f77b1000) AtapiVirtToPhysAddr_: f77b1000 -> 00000000:0016a000 ph data[0]=0:164000 (6fff) get Phys(data[n=1]=f77b2000) AtapiVirtToPhysAddr_: f77b2000 -> 00000000:0016b000 ph data[0]=0:164000 (7fff) get Phys(data[n=1]=f77b3000) AtapiVirtToPhysAddr_: f77b3000 -> 00000000:0016c000 ph data[0]=0:164000 (8fff) get Phys(data[n=1]=f77b4000) AtapiVirtToPhysAddr_: f77b4000 -> 00000000:0016d000 ph data[0]=0:164000 (9fff) get Phys(data[n=1]=f77b5000) AtapiVirtToPhysAddr_: f77b5000 -> 00000000:0016e000 ph data[0]=0:164000 (afff) get Phys(data[n=1]=f77b6000) AtapiVirtToPhysAddr_: f77b6000 -> 00000000:0016f000 ph data[0]=0:164000 (bfff) get Phys(data[n=1]=f77b7000) AtapiVirtToPhysAddr_: f77b7000 -> 00000000:00170000 ph data[0]=0:164000 (cfff) get Phys(data[n=1]=f77b8000) AtapiVirtToPhysAddr_: f77b8000 -> 00000000:00171000 ph data[0]=0:164000 (dfff) get Phys(data[n=1]=f77b9000) AtapiVirtToPhysAddr_: f77b9000 -> 00000000:00172000 ph data[0]=0:164000 (efff) get Phys(data[n=1]=f77ba000) AtapiVirtToPhysAddr_: f77ba000 -> 00000000:00173000 set TERM ph data[0]=0:164000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 c0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bb000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bb000) AtapiVirtToPhysAddr_: f77bb000 -> 00000000:00174000 ph data[0]=0:174000 (fff) get Phys(data[n=1]=f77bc000) AtapiVirtToPhysAddr_: f77bc000 -> 00000000:00175000 ph data[0]=0:174000 (1fff) get Phys(data[n=1]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:00176000 ph data[0]=0:174000 (2fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:00177000 ph data[0]=0:174000 (3fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:00178000 ph data[0]=0:174000 (4fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:00179000 ph data[0]=0:174000 (5fff) get Phys(data[n=1]=f77c1000) AtapiVirtToPhysAddr_: f77c1000 -> 00000000:0017a000 ph data[0]=0:174000 (6fff) get Phys(data[n=1]=f77c2000) AtapiVirtToPhysAddr_: f77c2000 -> 00000000:0017b000 ph data[0]=0:174000 (7fff) get Phys(data[n=1]=f77c3000) AtapiVirtToPhysAddr_: f77c3000 -> 00000000:0017c000 ph data[0]=0:174000 (8fff) get Phys(data[n=1]=f77c4000) AtapiVirtToPhysAddr_: f77c4000 -> 00000000:0017d000 ph data[0]=0:174000 (9fff) get Phys(data[n=1]=f77c5000) AtapiVirtToPhysAddr_: f77c5000 -> 00000000:0017e000 ph data[0]=0:174000 (afff) get Phys(data[n=1]=f77c6000) AtapiVirtToPhysAddr_: f77c6000 -> 00000000:0017f000 ph data[0]=0:174000 (bfff) get Phys(data[n=1]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:00780000 ph data[1]=0:780000 (fff) get Phys(data[n=2]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:007c1000 ph data[2]=0:7c1000 (fff) get Phys(data[n=3]=f77c9000) AtapiVirtToPhysAddr_: f77c9000 -> 00000000:00142000 ph data[3]=0:142000 (fff) get Phys(data[n=4]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:00143000 set TERM ph data[3]=0:142000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 00 e0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 0: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 1: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 2: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 3: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 4: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 5: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 6: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBEHCI] Port 7: Status 100, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B2457168 TransferBufferLength 32 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 10 (../../lib/drivers/libusb/hub_controller.cpp:334) [USBOHCI] Change state on port 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f778b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:00144000 ph data[0]=0:144000 (fff) get Phys(data[n=1]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:00145000 ph data[0]=0:144000 (1fff) get Phys(data[n=1]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:00146000 ph data[0]=0:144000 (2fff) get Phys(data[n=1]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:00147000 ph data[0]=0:144000 (3fff) get Phys(data[n=1]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:00148000 ph data[0]=0:144000 (4fff) get Phys(data[n=1]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:00149000 ph data[0]=0:144000 (5fff) get Phys(data[n=1]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:0014a000 ph data[0]=0:144000 (6fff) get Phys(data[n=1]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:007cb000 ph data[1]=0:7cb000 (fff) get Phys(data[n=2]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:007cc000 ph data[1]=0:7cb000 (1fff) get Phys(data[n=2]=f7794000) AtapiVirtToPhysAddr_: f7794000 -> 00000000:007cd000 ph data[1]=0:7cb000 (2fff) get Phys(data[n=2]=f7795000) AtapiVirtToPhysAddr_: f7795000 -> 00000000:0010e000 ph data[2]=0:10e000 (fff) get Phys(data[n=3]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:0010f000 ph data[2]=0:10e000 (1fff) get Phys(data[n=3]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:00110000 ph data[2]=0:10e000 (2fff) get Phys(data[n=3]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:00111000 ph data[2]=0:10e000 (3fff) get Phys(data[n=3]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:00112000 ph data[2]=0:10e000 (4fff) get Phys(data[n=3]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:00113000 set TERM ph data[2]=0:10e000 (5fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 8d 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:00114000 ph data[0]=0:114000 (fff) get Phys(data[n=1]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00115000 ph data[0]=0:114000 (1fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00116000 ph data[0]=0:114000 (2fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00117000 ph data[0]=0:114000 (3fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00118000 ph data[0]=0:114000 (4fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00119000 ph data[0]=0:114000 (5fff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:0011a000 ph data[0]=0:114000 (6fff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:0015b000 ph data[1]=0:15b000 (fff) get Phys(data[n=2]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:0015c000 ph data[1]=0:15b000 (1fff) get Phys(data[n=2]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:0015d000 ph data[1]=0:15b000 (2fff) get Phys(data[n=2]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:0015e000 ph data[1]=0:15b000 (3fff) get Phys(data[n=2]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:0011f000 ph data[2]=0:11f000 (fff) get Phys(data[n=3]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:00120000 ph data[2]=0:11f000 (1fff) get Phys(data[n=3]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:00121000 ph data[2]=0:11f000 (2fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00122000 ph data[2]=0:11f000 (3fff) get Phys(data[n=3]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:00123000 set TERM ph data[2]=0:11f000 (4fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 8d 20 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ab000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:00124000 ph data[0]=0:124000 (fff) get Phys(data[n=1]=f77ac000) AtapiVirtToPhysAddr_: f77ac000 -> 00000000:00125000 ph data[0]=0:124000 (1fff) get Phys(data[n=1]=f77ad000) AtapiVirtToPhysAddr_: f77ad000 -> 00000000:00126000 ph data[0]=0:124000 (2fff) get Phys(data[n=1]=f77ae000) AtapiVirtToPhysAddr_: f77ae000 -> 00000000:00127000 ph data[0]=0:124000 (3fff) get Phys(data[n=1]=f77af000) AtapiVirtToPhysAddr_: f77af000 -> 00000000:00128000 ph data[0]=0:124000 (4fff) get Phys(data[n=1]=f77b0000) AtapiVirtToPhysAddr_: f77b0000 -> 00000000:00129000 ph data[0]=0:124000 (5fff) get Phys(data[n=1]=f77b1000) AtapiVirtToPhysAddr_: f77b1000 -> 00000000:0012a000 ph data[0]=0:124000 (6fff) get Phys(data[n=1]=f77b2000) AtapiVirtToPhysAddr_: f77b2000 -> 00000000:0012b000 ph data[0]=0:124000 (7fff) get Phys(data[n=1]=f77b3000) AtapiVirtToPhysAddr_: f77b3000 -> 00000000:0012c000 ph data[0]=0:124000 (8fff) get Phys(data[n=1]=f77b4000) AtapiVirtToPhysAddr_: f77b4000 -> 00000000:0012d000 ph data[0]=0:124000 (9fff) get Phys(data[n=1]=f77b5000) AtapiVirtToPhysAddr_: f77b5000 -> 00000000:0012e000 ph data[0]=0:124000 (afff) get Phys(data[n=1]=f77b6000) AtapiVirtToPhysAddr_: f77b6000 -> 00000000:0012f000 ph data[0]=0:124000 (bfff) get Phys(data[n=1]=f77b7000) AtapiVirtToPhysAddr_: f77b7000 -> 00000000:00130000 ph data[0]=0:124000 (cfff) get Phys(data[n=1]=f77b8000) AtapiVirtToPhysAddr_: f77b8000 -> 00000000:00131000 ph data[0]=0:124000 (dfff) get Phys(data[n=1]=f77b9000) AtapiVirtToPhysAddr_: f77b9000 -> 00000000:00132000 ph data[0]=0:124000 (efff) get Phys(data[n=1]=f77ba000) AtapiVirtToPhysAddr_: f77ba000 -> 00000000:00133000 set TERM ph data[0]=0:124000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 8d 40 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bb000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bb000) AtapiVirtToPhysAddr_: f77bb000 -> 00000000:00134000 ph data[0]=0:134000 (fff) get Phys(data[n=1]=f77bc000) AtapiVirtToPhysAddr_: f77bc000 -> 00000000:00135000 ph data[0]=0:134000 (1fff) get Phys(data[n=1]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:00136000 ph data[0]=0:134000 (2fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:00137000 ph data[0]=0:134000 (3fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:00138000 ph data[0]=0:134000 (4fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:00139000 ph data[0]=0:134000 (5fff) get Phys(data[n=1]=f77c1000) AtapiVirtToPhysAddr_: f77c1000 -> 00000000:0013a000 ph data[0]=0:134000 (6fff) get Phys(data[n=1]=f77c2000) AtapiVirtToPhysAddr_: f77c2000 -> 00000000:0013b000 ph data[0]=0:134000 (7fff) get Phys(data[n=1]=f77c3000) AtapiVirtToPhysAddr_: f77c3000 -> 00000000:0013c000 ph data[0]=0:134000 (8fff) get Phys(data[n=1]=f77c4000) AtapiVirtToPhysAddr_: f77c4000 -> 00000000:0013d000 ph data[0]=0:134000 (9fff) get Phys(data[n=1]=f77c5000) AtapiVirtToPhysAddr_: f77c5000 -> 00000000:0013e000 ph data[0]=0:134000 (afff) get Phys(data[n=1]=f77c6000) AtapiVirtToPhysAddr_: f77c6000 -> 00000000:0013f000 ph data[0]=0:134000 (bfff) get Phys(data[n=1]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:00740000 ph data[1]=0:740000 (fff) get Phys(data[n=2]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:00781000 ph data[2]=0:781000 (fff) get Phys(data[n=3]=f77c9000) AtapiVirtToPhysAddr_: f77c9000 -> 00000000:007c2000 ph data[3]=0:7c2000 (fff) get Phys(data[n=4]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:007c3000 set TERM ph data[3]=0:7c2000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 8d 60 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f778b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:007c6000 ph data[0]=0:7c6000 (fff) get Phys(data[n=1]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:007c7000 ph data[0]=0:7c6000 (1fff) get Phys(data[n=1]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:007c8000 ph data[0]=0:7c6000 (2fff) get Phys(data[n=1]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:007c9000 ph data[0]=0:7c6000 (3fff) get Phys(data[n=1]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:007ca000 ph data[0]=0:7c6000 (4fff) get Phys(data[n=1]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:0078b000 ph data[1]=0:78b000 (fff) get Phys(data[n=2]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:0078c000 ph data[1]=0:78b000 (1fff) get Phys(data[n=2]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:0078d000 ph data[1]=0:78b000 (2fff) get Phys(data[n=2]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:007ce000 ph data[2]=0:7ce000 (fff) get Phys(data[n=3]=f7794000) AtapiVirtToPhysAddr_: f7794000 -> 00000000:007cf000 ph data[2]=0:7ce000 (1fff) get Phys(data[n=3]=f7795000) AtapiVirtToPhysAddr_: f7795000 -> 00000000:007d0000 ph data[2]=0:7ce000 (2fff) get Phys(data[n=3]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:007d1000 ph data[2]=0:7ce000 (3fff) get Phys(data[n=3]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:007d2000 ph data[2]=0:7ce000 (4fff) get Phys(data[n=3]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:007d3000 ph data[2]=0:7ce000 (5fff) get Phys(data[n=3]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:007d4000 ph data[2]=0:7ce000 (6fff) get Phys(data[n=3]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:007d5000 set TERM ph data[2]=0:7ce000 (7fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 97 80 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779b000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:007d6000 ph data[0]=0:7d6000 (fff) get Phys(data[n=1]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:007d7000 ph data[0]=0:7d6000 (1fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:007d8000 ph data[0]=0:7d6000 (2fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:007d9000 ph data[0]=0:7d6000 (3fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:007da000 ph data[0]=0:7d6000 (4fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:0011b000 ph data[1]=0:11b000 (fff) get Phys(data[n=2]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:0011c000 ph data[1]=0:11b000 (1fff) get Phys(data[n=2]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:0011d000 ph data[1]=0:11b000 (2fff) get Phys(data[n=2]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:0011e000 ph data[1]=0:11b000 (3fff) get Phys(data[n=2]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:007df000 ph data[2]=0:7df000 (fff) get Phys(data[n=3]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:007e0000 ph data[2]=0:7df000 (1fff) get Phys(data[n=3]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:007e1000 ph data[2]=0:7df000 (2fff) get Phys(data[n=3]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:007e2000 ph data[2]=0:7df000 (3fff) get Phys(data[n=3]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:007e3000 ph data[2]=0:7df000 (4fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:007e4000 ph data[2]=0:7df000 (5fff) get Phys(data[n=3]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:007e5000 set TERM ph data[2]=0:7df000 (6fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 97 a0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ab000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:007e6000 ph data[0]=0:7e6000 (fff) get Phys(data[n=1]=f77ac000) AtapiVirtToPhysAddr_: f77ac000 -> 00000000:007e7000 ph data[0]=0:7e6000 (1fff) get Phys(data[n=1]=f77ad000) AtapiVirtToPhysAddr_: f77ad000 -> 00000000:007e8000 ph data[0]=0:7e6000 (2fff) get Phys(data[n=1]=f77ae000) AtapiVirtToPhysAddr_: f77ae000 -> 00000000:007e9000 ph data[0]=0:7e6000 (3fff) get Phys(data[n=1]=f77af000) AtapiVirtToPhysAddr_: f77af000 -> 00000000:007ea000 ph data[0]=0:7e6000 (4fff) get Phys(data[n=1]=f77b0000) AtapiVirtToPhysAddr_: f77b0000 -> 00000000:007eb000 ph data[0]=0:7e6000 (5fff) get Phys(data[n=1]=f77b1000) AtapiVirtToPhysAddr_: f77b1000 -> 00000000:007ec000 ph data[0]=0:7e6000 (6fff) get Phys(data[n=1]=f77b2000) AtapiVirtToPhysAddr_: f77b2000 -> 00000000:007ed000 ph data[0]=0:7e6000 (7fff) get Phys(data[n=1]=f77b3000) AtapiVirtToPhysAddr_: f77b3000 -> 00000000:007ee000 ph data[0]=0:7e6000 (8fff) get Phys(data[n=1]=f77b4000) AtapiVirtToPhysAddr_: f77b4000 -> 00000000:007ef000 ph data[0]=0:7e6000 (9fff) get Phys(data[n=1]=f77b5000) AtapiVirtToPhysAddr_: f77b5000 -> 00000000:007f0000 ph data[0]=0:7e6000 (afff) get Phys(data[n=1]=f77b6000) AtapiVirtToPhysAddr_: f77b6000 -> 00000000:007f1000 ph data[0]=0:7e6000 (bfff) get Phys(data[n=1]=f77b7000) AtapiVirtToPhysAddr_: f77b7000 -> 00000000:007f2000 ph data[0]=0:7e6000 (cfff) get Phys(data[n=1]=f77b8000) AtapiVirtToPhysAddr_: f77b8000 -> 00000000:007f3000 ph data[0]=0:7e6000 (dfff) get Phys(data[n=1]=f77b9000) AtapiVirtToPhysAddr_: f77b9000 -> 00000000:007f4000 ph data[0]=0:7e6000 (efff) get Phys(data[n=1]=f77ba000) AtapiVirtToPhysAddr_: f77ba000 -> 00000000:007f5000 set TERM ph data[0]=0:7e6000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 97 c0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bb000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bb000) AtapiVirtToPhysAddr_: f77bb000 -> 00000000:007f6000 ph data[0]=0:7f6000 (fff) get Phys(data[n=1]=f77bc000) AtapiVirtToPhysAddr_: f77bc000 -> 00000000:007f7000 ph data[0]=0:7f6000 (1fff) get Phys(data[n=1]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:007f8000 ph data[0]=0:7f6000 (2fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:007f9000 ph data[0]=0:7f6000 (3fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:007fa000 ph data[0]=0:7f6000 (4fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:007fb000 ph data[0]=0:7f6000 (5fff) get Phys(data[n=1]=f77c1000) AtapiVirtToPhysAddr_: f77c1000 -> 00000000:007fc000 ph data[0]=0:7f6000 (6fff) get Phys(data[n=1]=f77c2000) AtapiVirtToPhysAddr_: f77c2000 -> 00000000:007fd000 ph data[0]=0:7f6000 (7fff) get Phys(data[n=1]=f77c3000) AtapiVirtToPhysAddr_: f77c3000 -> 00000000:007fe000 ph data[0]=0:7f6000 (8fff) get Phys(data[n=1]=f77c4000) AtapiVirtToPhysAddr_: f77c4000 -> 00000000:007ff000 ph data[0]=0:7f6000 (9fff) get Phys(data[n=1]=f77c5000) AtapiVirtToPhysAddr_: f77c5000 -> 00000000:00dc0000 ph data[1]=0:dc0000 (fff) get Phys(data[n=2]=f77c6000) AtapiVirtToPhysAddr_: f77c6000 -> 00000000:00741000 ph data[2]=0:741000 (fff) get Phys(data[n=3]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:00782000 ph data[3]=0:782000 (fff) get Phys(data[n=4]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:00783000 ph data[3]=0:782000 (1fff) get Phys(data[n=4]=f77c9000) AtapiVirtToPhysAddr_: f77c9000 -> 00000000:00784000 ph data[3]=0:782000 (2fff) get Phys(data[n=4]=f77ca000) AtapiVirtToPhysAddr_: f77ca000 -> 00000000:00785000 set TERM ph data[3]=0:782000 (3fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 97 e0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bd000, count d000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:00788000 ph data[0]=0:788000 (fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:00789000 ph data[0]=0:788000 (1fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:0078a000 ph data[0]=0:788000 (2fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:0074b000 ph data[1]=0:74b000 (fff) get Phys(data[n=2]=f77c1000) AtapiVirtToPhysAddr_: f77c1000 -> 00000000:0074c000 ph data[1]=0:74b000 (1fff) get Phys(data[n=2]=f77c2000) AtapiVirtToPhysAddr_: f77c2000 -> 00000000:0074d000 ph data[1]=0:74b000 (2fff) get Phys(data[n=2]=f77c3000) AtapiVirtToPhysAddr_: f77c3000 -> 00000000:0078e000 ph data[2]=0:78e000 (fff) get Phys(data[n=3]=f77c4000) AtapiVirtToPhysAddr_: f77c4000 -> 00000000:0078f000 ph data[2]=0:78e000 (1fff) get Phys(data[n=3]=f77c5000) AtapiVirtToPhysAddr_: f77c5000 -> 00000000:00790000 ph data[2]=0:78e000 (2fff) get Phys(data[n=3]=f77c6000) AtapiVirtToPhysAddr_: f77c6000 -> 00000000:00791000 ph data[2]=0:78e000 (3fff) get Phys(data[n=3]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:00792000 ph data[2]=0:78e000 (4fff) get Phys(data[n=3]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:00793000 ph data[2]=0:78e000 (5fff) get Phys(data[n=3]=f77c9000) AtapiVirtToPhysAddr_: f77c9000 -> 00000000:00794000 set TERM ph data[2]=0:78e000 (6fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 3a 00 00 1a 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 6800, WordsLeft 6800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d000, full size d000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77c7000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77c7000) AtapiVirtToPhysAddr_: f77c7000 -> 00000000:00748000 ph data[0]=0:748000 (fff) get Phys(data[n=1]=f77c8000) AtapiVirtToPhysAddr_: f77c8000 -> 00000000:00749000 set TERM ph data[0]=0:748000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 3a 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\vbemp.sys at F77C2000 with 9 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779c000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00753000 ph data[0]=0:753000 (fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00754000 ph data[0]=0:753000 (1fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00755000 ph data[0]=0:753000 (2fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00756000 ph data[0]=0:753000 (3fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00757000 ph data[0]=0:753000 (4fff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:00758000 ph data[0]=0:753000 (5fff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:00759000 ph data[0]=0:753000 (6fff) get Phys(data[n=1]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:0075a000 ph data[0]=0:753000 (7fff) get Phys(data[n=1]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:0079b000 ph data[1]=0:79b000 (fff) get Phys(data[n=2]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:0079c000 ph data[1]=0:79b000 (1fff) get Phys(data[n=2]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:0079d000 ph data[1]=0:79b000 (2fff) get Phys(data[n=2]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:0079e000 ph data[1]=0:79b000 (3fff) get Phys(data[n=2]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:0075f000 ph data[2]=0:75f000 (fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00760000 ph data[2]=0:75f000 (1fff) get Phys(data[n=3]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:00761000 ph data[2]=0:75f000 (2fff) get Phys(data[n=3]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:00762000 set TERM ph data[2]=0:75f000 (3fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 8a 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77ac000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77ac000) AtapiVirtToPhysAddr_: f77ac000 -> 00000000:00763000 ph data[0]=0:763000 (fff) get Phys(data[n=1]=f77ad000) AtapiVirtToPhysAddr_: f77ad000 -> 00000000:00764000 ph data[0]=0:763000 (1fff) get Phys(data[n=1]=f77ae000) AtapiVirtToPhysAddr_: f77ae000 -> 00000000:00765000 ph data[0]=0:763000 (2fff) get Phys(data[n=1]=f77af000) AtapiVirtToPhysAddr_: f77af000 -> 00000000:00766000 ph data[0]=0:763000 (3fff) get Phys(data[n=1]=f77b0000) AtapiVirtToPhysAddr_: f77b0000 -> 00000000:00767000 ph data[0]=0:763000 (4fff) get Phys(data[n=1]=f77b1000) AtapiVirtToPhysAddr_: f77b1000 -> 00000000:00768000 ph data[0]=0:763000 (5fff) get Phys(data[n=1]=f77b2000) AtapiVirtToPhysAddr_: f77b2000 -> 00000000:00769000 ph data[0]=0:763000 (6fff) get Phys(data[n=1]=f77b3000) AtapiVirtToPhysAddr_: f77b3000 -> 00000000:0076a000 ph data[0]=0:763000 (7fff) get Phys(data[n=1]=f77b4000) AtapiVirtToPhysAddr_: f77b4000 -> 00000000:0076b000 ph data[0]=0:763000 (8fff) get Phys(data[n=1]=f77b5000) AtapiVirtToPhysAddr_: f77b5000 -> 00000000:0076c000 ph data[0]=0:763000 (9fff) get Phys(data[n=1]=f77b6000) AtapiVirtToPhysAddr_: f77b6000 -> 00000000:0076d000 ph data[0]=0:763000 (afff) get Phys(data[n=1]=f77b7000) AtapiVirtToPhysAddr_: f77b7000 -> 00000000:0076e000 ph data[0]=0:763000 (bfff) get Phys(data[n=1]=f77b8000) AtapiVirtToPhysAddr_: f77b8000 -> 00000000:0076f000 ph data[0]=0:763000 (cfff) get Phys(data[n=1]=f77b9000) AtapiVirtToPhysAddr_: f77b9000 -> 00000000:00770000 ph data[0]=0:763000 (dfff) get Phys(data[n=1]=f77ba000) AtapiVirtToPhysAddr_: f77ba000 -> 00000000:00771000 ph data[0]=0:763000 (efff) get Phys(data[n=1]=f77bb000) AtapiVirtToPhysAddr_: f77bb000 -> 00000000:00772000 set TERM ph data[0]=0:763000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac aa 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77bc000, count 5000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77bc000) AtapiVirtToPhysAddr_: f77bc000 -> 00000000:00773000 ph data[0]=0:773000 (fff) get Phys(data[n=1]=f77bd000) AtapiVirtToPhysAddr_: f77bd000 -> 00000000:00774000 ph data[0]=0:773000 (1fff) get Phys(data[n=1]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:00775000 ph data[0]=0:773000 (2fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:00776000 ph data[0]=0:773000 (3fff) get Phys(data[n=1]=f77c0000) AtapiVirtToPhysAddr_: f77c0000 -> 00000000:00777000 set TERM ph data[0]=0:773000 (4fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac ca 00 00 0a 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77be000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77be000) AtapiVirtToPhysAddr_: f77be000 -> 00000000:00713000 ph data[0]=0:713000 (fff) get Phys(data[n=1]=f77bf000) AtapiVirtToPhysAddr_: f77bf000 -> 00000000:00714000 set TERM ph data[0]=0:713000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 8a 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\videoprt.sys at F77AC000 with 16 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 Formatted registry key '\Registry\Machine\System\CurrentControlSet\Services\VBE' -> '\Registry\Machine\System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\VBE\Device0' WARNING: ExUuidCreate at ../../ntoskrnl/ex/uuid.c:305 is UNIMPLEMENTED! (../../win32ss/drivers/videoprt/registry.c:312) Failed to open device software key. Status 0xc0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../hal/halx86/legacy/bus/pcibus.c:690) HAL: No PCI Resource Adjustment done! Hardware may malfunction (../../drivers/bus/pci/pdo.c:1272) Assigning IRQ 11 to PCI device 0x2 on bus 0x0 (../../drivers/bus/pci/pdo.c:1289) Enabling command flags for PCI device 0x2 on bus 0x0: [Bus master] [Memory space enable] (../../ntoskrnl/io/pnpmgr/pnpmgr.c:854) IRP_MN_QUERY_CAPABILITIES failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:686) IopInitiatePnpIrp() failed (Status 0xc00000bb) (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: VBE (../../ntoskrnl/io/iomgr/driver.c:351) IopOpenRegistryKeyEx() failed for 'i8042prt' with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:351) IopOpenRegistryKeyEx() failed for 'i8042prt' with Status C0000034 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f776c000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f776c000) AtapiVirtToPhysAddr_: f776c000 -> 00000000:0072f000 ph data[0]=0:72f000 (fff) get Phys(data[n=1]=f776d000) AtapiVirtToPhysAddr_: f776d000 -> 00000000:00730000 ph data[0]=0:72f000 (1fff) get Phys(data[n=1]=f776e000) AtapiVirtToPhysAddr_: f776e000 -> 00000000:00731000 ph data[0]=0:72f000 (2fff) get Phys(data[n=1]=f776f000) AtapiVirtToPhysAddr_: f776f000 -> 00000000:00732000 ph data[0]=0:72f000 (3fff) get Phys(data[n=1]=f7770000) AtapiVirtToPhysAddr_: f7770000 -> 00000000:00733000 ph data[0]=0:72f000 (4fff) get Phys(data[n=1]=f7771000) AtapiVirtToPhysAddr_: f7771000 -> 00000000:00734000 ph data[0]=0:72f000 (5fff) get Phys(data[n=1]=f7772000) AtapiVirtToPhysAddr_: f7772000 -> 00000000:00735000 ph data[0]=0:72f000 (6fff) get Phys(data[n=1]=f7773000) AtapiVirtToPhysAddr_: f7773000 -> 00000000:00736000 ph data[0]=0:72f000 (7fff) get Phys(data[n=1]=f7774000) AtapiVirtToPhysAddr_: f7774000 -> 00000000:00737000 ph data[0]=0:72f000 (8fff) get Phys(data[n=1]=f7775000) AtapiVirtToPhysAddr_: f7775000 -> 00000000:00738000 ph data[0]=0:72f000 (9fff) get Phys(data[n=1]=f7776000) AtapiVirtToPhysAddr_: f7776000 -> 00000000:00739000 ph data[0]=0:72f000 (afff) get Phys(data[n=1]=f7777000) AtapiVirtToPhysAddr_: f7777000 -> 00000000:0073a000 ph data[0]=0:72f000 (bfff) get Phys(data[n=1]=f7778000) AtapiVirtToPhysAddr_: f7778000 -> 00000000:0073b000 ph data[0]=0:72f000 (cfff) get Phys(data[n=1]=f7779000) AtapiVirtToPhysAddr_: f7779000 -> 00000000:0073c000 ph data[0]=0:72f000 (dfff) get Phys(data[n=1]=f777a000) AtapiVirtToPhysAddr_: f777a000 -> 00000000:0073d000 ph data[0]=0:72f000 (efff) get Phys(data[n=1]=f777b000) AtapiVirtToPhysAddr_: f777b000 -> 00000000:0073e000 set TERM ph data[0]=0:72f000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 b0 80 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f777c000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f777c000) AtapiVirtToPhysAddr_: f777c000 -> 00000000:0073f000 ph data[0]=0:73f000 (fff) get Phys(data[n=1]=f777d000) AtapiVirtToPhysAddr_: f777d000 -> 00000000:00d00000 ph data[1]=0:d00000 (fff) get Phys(data[n=2]=f777e000) AtapiVirtToPhysAddr_: f777e000 -> 00000000:00d41000 ph data[2]=0:d41000 (fff) get Phys(data[n=3]=f777f000) AtapiVirtToPhysAddr_: f777f000 -> 00000000:00d82000 ph data[3]=0:d82000 (fff) get Phys(data[n=4]=f7780000) AtapiVirtToPhysAddr_: f7780000 -> 00000000:00d83000 ph data[3]=0:d82000 (1fff) get Phys(data[n=4]=f7781000) AtapiVirtToPhysAddr_: f7781000 -> 00000000:00d84000 ph data[3]=0:d82000 (2fff) get Phys(data[n=4]=f7782000) AtapiVirtToPhysAddr_: f7782000 -> 00000000:00d85000 ph data[3]=0:d82000 (3fff) get Phys(data[n=4]=f7783000) AtapiVirtToPhysAddr_: f7783000 -> 00000000:00d86000 ph data[3]=0:d82000 (4fff) get Phys(data[n=4]=f7784000) AtapiVirtToPhysAddr_: f7784000 -> 00000000:00d87000 ph data[3]=0:d82000 (5fff) get Phys(data[n=4]=f7785000) AtapiVirtToPhysAddr_: f7785000 -> 00000000:00dc8000 ph data[4]=0:dc8000 (fff) get Phys(data[n=5]=f7786000) AtapiVirtToPhysAddr_: f7786000 -> 00000000:00dc9000 ph data[4]=0:dc8000 (1fff) get Phys(data[n=5]=f7787000) AtapiVirtToPhysAddr_: f7787000 -> 00000000:00dca000 ph data[4]=0:dc8000 (2fff) get Phys(data[n=5]=f7788000) AtapiVirtToPhysAddr_: f7788000 -> 00000000:00d8b000 ph data[5]=0:d8b000 (fff) get Phys(data[n=6]=f7789000) AtapiVirtToPhysAddr_: f7789000 -> 00000000:00d8c000 ph data[5]=0:d8b000 (1fff) get Phys(data[n=6]=f778a000) AtapiVirtToPhysAddr_: f778a000 -> 00000000:00d8d000 ph data[5]=0:d8b000 (2fff) get Phys(data[n=6]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:00dce000 set TERM ph data[6]=0:dce000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x7, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 b0 a0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f778c000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:00dcf000 ph data[0]=0:dcf000 (fff) get Phys(data[n=1]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:00dd0000 ph data[0]=0:dcf000 (1fff) get Phys(data[n=1]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:00dd1000 ph data[0]=0:dcf000 (2fff) get Phys(data[n=1]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:00dd2000 ph data[0]=0:dcf000 (3fff) get Phys(data[n=1]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:00dd3000 ph data[0]=0:dcf000 (4fff) get Phys(data[n=1]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:00dd4000 ph data[0]=0:dcf000 (5fff) get Phys(data[n=1]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:00dd5000 ph data[0]=0:dcf000 (6fff) get Phys(data[n=1]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:00dd6000 ph data[0]=0:dcf000 (7fff) get Phys(data[n=1]=f7794000) AtapiVirtToPhysAddr_: f7794000 -> 00000000:00dd7000 ph data[0]=0:dcf000 (8fff) get Phys(data[n=1]=f7795000) AtapiVirtToPhysAddr_: f7795000 -> 00000000:00dd8000 ph data[0]=0:dcf000 (9fff) get Phys(data[n=1]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:00dd9000 ph data[0]=0:dcf000 (afff) get Phys(data[n=1]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:00dda000 ph data[0]=0:dcf000 (bfff) get Phys(data[n=1]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:0071b000 ph data[1]=0:71b000 (fff) get Phys(data[n=2]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:0071c000 ph data[1]=0:71b000 (1fff) get Phys(data[n=2]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:0071d000 ph data[1]=0:71b000 (2fff) get Phys(data[n=2]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:0071e000 set TERM ph data[1]=0:71b000 (3fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 b0 c0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f779c000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00ddf000 ph data[0]=0:ddf000 (fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00de0000 ph data[0]=0:ddf000 (1fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00de1000 ph data[0]=0:ddf000 (2fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00de2000 ph data[0]=0:ddf000 (3fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00de3000 ph data[0]=0:ddf000 (4fff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:00de4000 ph data[0]=0:ddf000 (5fff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:00de5000 ph data[0]=0:ddf000 (6fff) get Phys(data[n=1]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:00de6000 ph data[0]=0:ddf000 (7fff) get Phys(data[n=1]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:00de7000 ph data[0]=0:ddf000 (8fff) get Phys(data[n=1]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:00de8000 ph data[0]=0:ddf000 (9fff) get Phys(data[n=1]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:00de9000 ph data[0]=0:ddf000 (afff) get Phys(data[n=1]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:00dea000 ph data[0]=0:ddf000 (bfff) get Phys(data[n=1]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:00deb000 ph data[0]=0:ddf000 (cfff) get Phys(data[n=1]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00dec000 ph data[0]=0:ddf000 (dfff) get Phys(data[n=1]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:00ded000 ph data[0]=0:ddf000 (efff) get Phys(data[n=1]=f77ab000) AtapiVirtToPhysAddr_: f77ab000 -> 00000000:00dee000 set TERM ph data[0]=0:ddf000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 b0 e0 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77aa800, count 800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77aa800) AtapiVirtToPhysAddr_: f77aa800 -> 00000000:04f81800 set TERM ph data[0]=0:4f81800 (7ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 b0 de 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 400, WordsLeft 400 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 800, full size 800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/iomgr/driver.c:351) IopOpenRegistryKeyEx() failed for 'i8042prt' with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:351) IopOpenRegistryKeyEx() failed for 'i8042prt' with Status C0000034 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7796000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7796000) AtapiVirtToPhysAddr_: f7796000 -> 00000000:00daf000 ph data[0]=0:daf000 (fff) get Phys(data[n=1]=f7797000) AtapiVirtToPhysAddr_: f7797000 -> 00000000:00db0000 ph data[0]=0:daf000 (1fff) get Phys(data[n=1]=f7798000) AtapiVirtToPhysAddr_: f7798000 -> 00000000:00db1000 ph data[0]=0:daf000 (2fff) get Phys(data[n=1]=f7799000) AtapiVirtToPhysAddr_: f7799000 -> 00000000:00db2000 ph data[0]=0:daf000 (3fff) get Phys(data[n=1]=f779a000) AtapiVirtToPhysAddr_: f779a000 -> 00000000:00db3000 ph data[0]=0:daf000 (4fff) get Phys(data[n=1]=f779b000) AtapiVirtToPhysAddr_: f779b000 -> 00000000:00db4000 ph data[0]=0:daf000 (5fff) get Phys(data[n=1]=f779c000) AtapiVirtToPhysAddr_: f779c000 -> 00000000:00db5000 ph data[0]=0:daf000 (6fff) get Phys(data[n=1]=f779d000) AtapiVirtToPhysAddr_: f779d000 -> 00000000:00db6000 ph data[0]=0:daf000 (7fff) get Phys(data[n=1]=f779e000) AtapiVirtToPhysAddr_: f779e000 -> 00000000:00db7000 ph data[0]=0:daf000 (8fff) get Phys(data[n=1]=f779f000) AtapiVirtToPhysAddr_: f779f000 -> 00000000:00db8000 ph data[0]=0:daf000 (9fff) get Phys(data[n=1]=f77a0000) AtapiVirtToPhysAddr_: f77a0000 -> 00000000:00db9000 ph data[0]=0:daf000 (afff) get Phys(data[n=1]=f77a1000) AtapiVirtToPhysAddr_: f77a1000 -> 00000000:00dba000 ph data[0]=0:daf000 (bfff) get Phys(data[n=1]=f77a2000) AtapiVirtToPhysAddr_: f77a2000 -> 00000000:00dbb000 ph data[0]=0:daf000 (cfff) get Phys(data[n=1]=f77a3000) AtapiVirtToPhysAddr_: f77a3000 -> 00000000:00dbc000 ph data[0]=0:daf000 (dfff) get Phys(data[n=1]=f77a4000) AtapiVirtToPhysAddr_: f77a4000 -> 00000000:00dbd000 ph data[0]=0:daf000 (efff) get Phys(data[n=1]=f77a5000) AtapiVirtToPhysAddr_: f77a5000 -> 00000000:00dbe000 set TERM ph data[0]=0:daf000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 36 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (../../drivers/usb/usbohci/hardware.cpp:1155) Enabling status change (../../lib/drivers/libusb/hub_controller.cpp:2705) USBHI_CreateUsbDevice AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../lib/drivers/libusb/usb_device.cpp:314) [USBOHCI] SetDeviceAddress> Address 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77a6000, count 5000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77a6000) AtapiVirtToPhysAddr_: f77a6000 -> 00000000:00d7f000 ph data[0]=0:d7f000 (fff) get Phys(data[n=1]=f77a7000) AtapiVirtToPhysAddr_: f77a7000 -> 00000000:00f80000 ph data[1]=0:f80000 (fff) get Phys(data[n=2]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:00fc1000 ph data[2]=0:fc1000 (fff) get Phys(data[n=3]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00d02000 ph data[3]=0:d02000 (fff) get Phys(data[n=4]=f77aa000) AtapiVirtToPhysAddr_: f77aa000 -> 00000000:00d03000 set TERM ph data[3]=0:d02000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 56 00 00 0a 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f77a8000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f77a8000) AtapiVirtToPhysAddr_: f77a8000 -> 00000000:00d6f000 ph data[0]=0:d6f000 (fff) get Phys(data[n=1]=f77a9000) AtapiVirtToPhysAddr_: f77a9000 -> 00000000:00d70000 set TERM ph data[0]=0:d6f000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 36 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\floppy.sys at F7799000 with 13 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/iomgr/driver.c:1634) '\Driver\FLOPPY' initialization failed, status (0xc000000e) (../../ntoskrnl/io/iomgr/driver.c:61) Deleting driver object '\Driver\FLOPPY' (../../ntoskrnl/io/iomgr/driver.c:2014) IopInitializeDriverModule() failed (Status c000000e) (../../ntoskrnl/mm/ARM3/sysldr.c:954) Leaking driver: floppy.sys TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7788000, count c000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7788000) AtapiVirtToPhysAddr_: f7788000 -> 00000000:00fcd000 ph data[0]=0:fcd000 (fff) get Phys(data[n=1]=f7789000) AtapiVirtToPhysAddr_: f7789000 -> 00000000:00d0e000 ph data[1]=0:d0e000 (fff) get Phys(data[n=2]=f778a000) AtapiVirtToPhysAddr_: f778a000 -> 00000000:00d0f000 ph data[1]=0:d0e000 (1fff) get Phys(data[n=2]=f778b000) AtapiVirtToPhysAddr_: f778b000 -> 00000000:00d10000 ph data[1]=0:d0e000 (2fff) get Phys(data[n=2]=f778c000) AtapiVirtToPhysAddr_: f778c000 -> 00000000:00d11000 ph data[1]=0:d0e000 (3fff) get Phys(data[n=2]=f778d000) AtapiVirtToPhysAddr_: f778d000 -> 00000000:00d12000 ph data[1]=0:d0e000 (4fff) get Phys(data[n=2]=f778e000) AtapiVirtToPhysAddr_: f778e000 -> 00000000:00d13000 ph data[1]=0:d0e000 (5fff) get Phys(data[n=2]=f778f000) AtapiVirtToPhysAddr_: f778f000 -> 00000000:00d14000 ph data[1]=0:d0e000 (6fff) get Phys(data[n=2]=f7790000) AtapiVirtToPhysAddr_: f7790000 -> 00000000:00d15000 ph data[1]=0:d0e000 (7fff) get Phys(data[n=2]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:00d16000 ph data[1]=0:d0e000 (8fff) get Phys(data[n=2]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:00d17000 ph data[1]=0:d0e000 (9fff) get Phys(data[n=2]=f7793000) AtapiVirtToPhysAddr_: f7793000 -> 00000000:00d18000 set TERM ph data[1]=0:d0e000 (afff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 60 00 00 18 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 6000, WordsLeft 6000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c000, full size c000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7791000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7791000) AtapiVirtToPhysAddr_: f7791000 -> 00000000:00f8d000 ph data[0]=0:f8d000 (fff) get Phys(data[n=1]=f7792000) AtapiVirtToPhysAddr_: f7792000 -> 00000000:00fce000 set TERM ph data[1]=0:fce000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 60 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\fs_rec.sys at F778C000 with 9 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: FS_REC TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7781000, count a000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7781000) AtapiVirtToPhysAddr_: f7781000 -> 00000000:00fd9000 ph data[0]=0:fd9000 (fff) get Phys(data[n=1]=f7782000) AtapiVirtToPhysAddr_: f7782000 -> 00000000:00fda000 ph data[0]=0:fd9000 (1fff) get Phys(data[n=1]=f7783000) AtapiVirtToPhysAddr_: f7783000 -> 00000000:00d1b000 ph data[1]=0:d1b000 (fff) get Phys(data[n=2]=f7784000) AtapiVirtToPhysAddr_: f7784000 -> 00000000:00d1c000 ph data[1]=0:d1b000 (1fff) get Phys(data[n=2]=f7785000) AtapiVirtToPhysAddr_: f7785000 -> 00000000:00d1d000 ph data[1]=0:d1b000 (2fff) get Phys(data[n=2]=f7786000) AtapiVirtToPhysAddr_: f7786000 -> 00000000:00d1e000 ph data[1]=0:d1b000 (3fff) get Phys(data[n=2]=f7787000) AtapiVirtToPhysAddr_: f7787000 -> 00000000:00fdf000 ph data[2]=0:fdf000 (fff) get Phys(data[n=3]=f7788000) AtapiVirtToPhysAddr_: f7788000 -> 00000000:00fe0000 ph data[2]=0:fdf000 (1fff) get Phys(data[n=3]=f7789000) AtapiVirtToPhysAddr_: f7789000 -> 00000000:00fe1000 ph data[2]=0:fdf000 (2fff) get Phys(data[n=3]=f778a000) AtapiVirtToPhysAddr_: f778a000 -> 00000000:00fe2000 set TERM ph data[2]=0:fdf000 (3fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 7f 00 00 14 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 5000, WordsLeft 5000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered a000, full size a000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7788000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7788000) AtapiVirtToPhysAddr_: f7788000 -> 00000000:00f99000 ph data[0]=0:f99000 (fff) get Phys(data[n=1]=f7789000) AtapiVirtToPhysAddr_: f7789000 -> 00000000:00f9a000 set TERM ph data[0]=0:f99000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 7f 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\beep.sys at F7785000 with 7 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: BEEP TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f777b000, count 9000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f777b000) AtapiVirtToPhysAddr_: f777b000 -> 00000000:00fa2000 ph data[0]=0:fa2000 (fff) get Phys(data[n=1]=f777c000) AtapiVirtToPhysAddr_: f777c000 -> 00000000:00fa3000 ph data[0]=0:fa2000 (1fff) get Phys(data[n=1]=f777d000) AtapiVirtToPhysAddr_: f777d000 -> 00000000:00fa4000 ph data[0]=0:fa2000 (2fff) get Phys(data[n=1]=f777e000) AtapiVirtToPhysAddr_: f777e000 -> 00000000:00fa5000 ph data[0]=0:fa2000 (3fff) get Phys(data[n=1]=f777f000) AtapiVirtToPhysAddr_: f777f000 -> 00000000:00fa6000 ph data[0]=0:fa2000 (4fff) get Phys(data[n=1]=f7780000) AtapiVirtToPhysAddr_: f7780000 -> 00000000:00fa7000 ph data[0]=0:fa2000 (5fff) get Phys(data[n=1]=f7781000) AtapiVirtToPhysAddr_: f7781000 -> 00000000:00fa8000 ph data[0]=0:fa2000 (6fff) get Phys(data[n=1]=f7782000) AtapiVirtToPhysAddr_: f7782000 -> 00000000:00fa9000 ph data[0]=0:fa2000 (7fff) get Phys(data[n=1]=f7783000) AtapiVirtToPhysAddr_: f7783000 -> 00000000:00faa000 set TERM ph data[0]=0:fa2000 (8fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a5 38 00 00 12 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/usb_device.cpp:844) Dumping Device Descriptor B244F9E8 (../../lib/drivers/libusb/usb_device.cpp:845) bLength 12 (../../lib/drivers/libusb/usb_device.cpp:846) bDescriptorType 1 (../../lib/drivers/libusb/usb_device.cpp:847) bcdUSB 110 (../../lib/drivers/libusb/usb_device.cpp:848) bDeviceClass 0 (../../lib/drivers/libusb/usb_device.cpp:849) bDeviceSubClass 0 (../../lib/drivers/libusb/usb_device.cpp:850) bDeviceProtocol 0 (../../lib/drivers/libusb/usb_device.cpp:851) bMaxPacketSize0 8 (../../lib/drivers/libusb/usb_device.cpp:852) idVendor 80ee (../../lib/drivers/libusb/usb_device.cpp:853) idProduct 21 (../../lib/drivers/libusb/usb_device.cpp:854) bcdDevice 100 (../../lib/drivers/libusb/usb_device.cpp:855) iManufacturer 1 (../../lib/drivers/libusb/usb_device.cpp:856) iProduct 3 (../../lib/drivers/libusb/usb_device.cpp:857) iSerialNumber 0 (../../lib/drivers/libusb/usb_device.cpp:858) bNumConfigurations 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 4800, WordsLeft 4800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 9000, full size 9000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7781000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7781000) AtapiVirtToPhysAddr_: f7781000 -> 00000000:00f62000 ph data[0]=0:f62000 (fff) get Phys(data[n=1]=f7782000) AtapiVirtToPhysAddr_: f7782000 -> 00000000:00f63000 set TERM ph data[0]=0:f62000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a5 38 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\null.sys at F777E000 with 7 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: NULL TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f776f000, count e000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f776f000) AtapiVirtToPhysAddr_: f776f000 -> 00000000:00f6b000 ph data[0]=0:f6b000 (fff) get Phys(data[n=1]=f7770000) AtapiVirtToPhysAddr_: f7770000 -> 00000000:00f6c000 ph data[0]=0:f6b000 (1fff) get Phys(data[n=1]=f7771000) AtapiVirtToPhysAddr_: f7771000 -> 00000000:00f6d000 ph data[0]=0:f6b000 (2fff) get Phys(data[n=1]=f7772000) AtapiVirtToPhysAddr_: f7772000 -> 00000000:00f6e000 ph data[0]=0:f6b000 (3fff) get Phys(data[n=1]=f7773000) AtapiVirtToPhysAddr_: f7773000 -> 00000000:00f6f000 ph data[0]=0:f6b000 (4fff) get Phys(data[n=1]=f7774000) AtapiVirtToPhysAddr_: f7774000 -> 00000000:00f70000 ph data[0]=0:f6b000 (5fff) get Phys(data[n=1]=f7775000) AtapiVirtToPhysAddr_: f7775000 -> 00000000:00f71000 ph data[0]=0:f6b000 (6fff) get Phys(data[n=1]=f7776000) AtapiVirtToPhysAddr_: f7776000 -> 00000000:00f72000 ph data[0]=0:f6b000 (7fff) get Phys(data[n=1]=f7777000) AtapiVirtToPhysAddr_: f7777000 -> 00000000:00f73000 ph data[0]=0:f6b000 (8fff) get Phys(data[n=1]=f7778000) AtapiVirtToPhysAddr_: f7778000 -> 00000000:00f74000 ph data[0]=0:f6b000 (9fff) get Phys(data[n=1]=f7779000) AtapiVirtToPhysAddr_: f7779000 -> 00000000:00f75000 ph data[0]=0:f6b000 (afff) get Phys(data[n=1]=f777a000) AtapiVirtToPhysAddr_: f777a000 -> 00000000:00f76000 ph data[0]=0:f6b000 (bfff) get Phys(data[n=1]=f777b000) AtapiVirtToPhysAddr_: f777b000 -> 00000000:00f77000 ph data[0]=0:f6b000 (cfff) get Phys(data[n=1]=f777c000) AtapiVirtToPhysAddr_: f777c000 -> 00000000:00f78000 set TERM ph data[0]=0:f6b000 (dfff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 4c 00 00 1c 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 7000, WordsLeft 7000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e000, full size e000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f777a000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f777a000) AtapiVirtToPhysAddr_: f777a000 -> 00000000:00f2b000 ph data[0]=0:f2b000 (fff) get Phys(data[n=1]=f777b000) AtapiVirtToPhysAddr_: f777b000 -> 00000000:00f2c000 set TERM ph data[0]=0:f2b000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 4c 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\mouclass.sys at F7775000 with 9 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: MOUCLASS TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f775f000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f775f000) AtapiVirtToPhysAddr_: f775f000 -> 00000000:00f38000 ph data[0]=0:f38000 (fff) get Phys(data[n=1]=f7760000) AtapiVirtToPhysAddr_: f7760000 -> 00000000:00f39000 ph data[0]=0:f38000 (1fff) get Phys(data[n=1]=f7761000) AtapiVirtToPhysAddr_: f7761000 -> 00000000:00f3a000 ph data[0]=0:f38000 (2fff) get Phys(data[n=1]=f7762000) AtapiVirtToPhysAddr_: f7762000 -> 00000000:00f3b000 ph data[0]=0:f38000 (3fff) get Phys(data[n=1]=f7763000) AtapiVirtToPhysAddr_: f7763000 -> 00000000:00f3c000 ph data[0]=0:f38000 (4fff) get Phys(data[n=1]=f7764000) AtapiVirtToPhysAddr_: f7764000 -> 00000000:00f3d000 ph data[0]=0:f38000 (5fff) get Phys(data[n=1]=f7765000) AtapiVirtToPhysAddr_: f7765000 -> 00000000:00f3e000 ph data[0]=0:f38000 (6fff) get Phys(data[n=1]=f7766000) AtapiVirtToPhysAddr_: f7766000 -> 00000000:00ebf000 ph data[1]=0:ebf000 (fff) get Phys(data[n=2]=f7767000) AtapiVirtToPhysAddr_: f7767000 -> 00000000:00e00000 ph data[2]=0:e00000 (fff) get Phys(data[n=3]=f7768000) AtapiVirtToPhysAddr_: f7768000 -> 00000000:00e41000 ph data[3]=0:e41000 (fff) get Phys(data[n=4]=f7769000) AtapiVirtToPhysAddr_: f7769000 -> 00000000:00e82000 ph data[4]=0:e82000 (fff) get Phys(data[n=5]=f776a000) AtapiVirtToPhysAddr_: f776a000 -> 00000000:00e83000 ph data[4]=0:e82000 (1fff) get Phys(data[n=5]=f776b000) AtapiVirtToPhysAddr_: f776b000 -> 00000000:00e84000 ph data[4]=0:e82000 (2fff) get Phys(data[n=5]=f776c000) AtapiVirtToPhysAddr_: f776c000 -> 00000000:00e85000 ph data[4]=0:e82000 (3fff) get Phys(data[n=5]=f776d000) AtapiVirtToPhysAddr_: f776d000 -> 00000000:00e86000 ph data[4]=0:e82000 (4fff) get Phys(data[n=5]=f776e000) AtapiVirtToPhysAddr_: f776e000 -> 00000000:00e87000 set TERM ph data[4]=0:e82000 (5fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x5, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9f 48 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f776f000, count 5000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f776f000) AtapiVirtToPhysAddr_: f776f000 -> 00000000:00ec8000 ph data[0]=0:ec8000 (fff) get Phys(data[n=1]=f7770000) AtapiVirtToPhysAddr_: f7770000 -> 00000000:00ec9000 ph data[0]=0:ec8000 (1fff) get Phys(data[n=1]=f7771000) AtapiVirtToPhysAddr_: f7771000 -> 00000000:00eca000 ph data[0]=0:ec8000 (2fff) get Phys(data[n=1]=f7772000) AtapiVirtToPhysAddr_: f7772000 -> 00000000:00e8b000 ph data[1]=0:e8b000 (fff) get Phys(data[n=2]=f7773000) AtapiVirtToPhysAddr_: f7773000 -> 00000000:00e8c000 set TERM ph data[1]=0:e8b000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9f 68 00 00 0a 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 2800, WordsLeft 2800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 5000, full size 5000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7771000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7771000) AtapiVirtToPhysAddr_: f7771000 -> 00000000:00ef8000 ph data[0]=0:ef8000 (fff) get Phys(data[n=1]=f7772000) AtapiVirtToPhysAddr_: f7772000 -> 00000000:00ef9000 set TERM ph data[0]=0:ef8000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9f 48 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\kbdclass.sys at F776A000 with b pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: KBDCLASS TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f775d000, count c000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f775d000) AtapiVirtToPhysAddr_: f775d000 -> 00000000:00e45000 ph data[0]=0:e45000 (fff) get Phys(data[n=1]=f775e000) AtapiVirtToPhysAddr_: f775e000 -> 00000000:00e46000 ph data[0]=0:e45000 (1fff) get Phys(data[n=1]=f775f000) AtapiVirtToPhysAddr_: f775f000 -> 00000000:00e47000 ph data[0]=0:e45000 (2fff) get Phys(data[n=1]=f7760000) AtapiVirtToPhysAddr_: f7760000 -> 00000000:00e88000 ph data[1]=0:e88000 (fff) get Phys(data[n=2]=f7761000) AtapiVirtToPhysAddr_: f7761000 -> 00000000:00e89000 ph data[1]=0:e88000 (1fff) get Phys(data[n=2]=f7762000) AtapiVirtToPhysAddr_: f7762000 -> 00000000:00e8a000 ph data[1]=0:e88000 (2fff) get Phys(data[n=2]=f7763000) AtapiVirtToPhysAddr_: f7763000 -> 00000000:00e4b000 ph data[2]=0:e4b000 (fff) get Phys(data[n=3]=f7764000) AtapiVirtToPhysAddr_: f7764000 -> 00000000:00e4c000 ph data[2]=0:e4b000 (1fff) get Phys(data[n=3]=f7765000) AtapiVirtToPhysAddr_: f7765000 -> 00000000:00e4d000 ph data[2]=0:e4b000 (2fff) get Phys(data[n=3]=f7766000) AtapiVirtToPhysAddr_: f7766000 -> 00000000:00e8e000 ph data[3]=0:e8e000 (fff) get Phys(data[n=4]=f7767000) AtapiVirtToPhysAddr_: f7767000 -> 00000000:00e8f000 ph data[3]=0:e8e000 (1fff) get Phys(data[n=4]=f7768000) AtapiVirtToPhysAddr_: f7768000 -> 00000000:00e90000 set TERM ph data[3]=0:e8e000 (2fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 93 00 00 18 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 6000, WordsLeft 6000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c000, full size c000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7766000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7766000) AtapiVirtToPhysAddr_: f7766000 -> 00000000:00e05000 ph data[0]=0:e05000 (fff) get Phys(data[n=1]=f7767000) AtapiVirtToPhysAddr_: f7767000 -> 00000000:00e06000 set TERM ph data[0]=0:e05000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 93 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\blue.sys at F7762000 with 8 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: BLUE TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7756000, count b000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7756000) AtapiVirtToPhysAddr_: f7756000 -> 00000000:00e4f000 ph data[0]=0:e4f000 (fff) get Phys(data[n=1]=f7757000) AtapiVirtToPhysAddr_: f7757000 -> 00000000:00e50000 ph data[0]=0:e4f000 (1fff) get Phys(data[n=1]=f7758000) AtapiVirtToPhysAddr_: f7758000 -> 00000000:00e51000 ph data[0]=0:e4f000 (2fff) get Phys(data[n=1]=f7759000) AtapiVirtToPhysAddr_: f7759000 -> 00000000:00e52000 ph data[0]=0:e4f000 (3fff) get Phys(data[n=1]=f775a000) AtapiVirtToPhysAddr_: f775a000 -> 00000000:00e53000 ph data[0]=0:e4f000 (4fff) get Phys(data[n=1]=f775b000) AtapiVirtToPhysAddr_: f775b000 -> 00000000:00e54000 ph data[0]=0:e4f000 (5fff) get Phys(data[n=1]=f775c000) AtapiVirtToPhysAddr_: f775c000 -> 00000000:00e55000 ph data[0]=0:e4f000 (6fff) get Phys(data[n=1]=f775d000) AtapiVirtToPhysAddr_: f775d000 -> 00000000:00e56000 ph data[0]=0:e4f000 (7fff) get Phys(data[n=1]=f775e000) AtapiVirtToPhysAddr_: f775e000 -> 00000000:00e57000 ph data[0]=0:e4f000 (8fff) get Phys(data[n=1]=f775f000) AtapiVirtToPhysAddr_: f775f000 -> 00000000:00e58000 ph data[0]=0:e4f000 (9fff) get Phys(data[n=1]=f7760000) AtapiVirtToPhysAddr_: f7760000 -> 00000000:00e59000 set TERM ph data[0]=0:e4f000 (afff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 74 00 00 16 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 5800, WordsLeft 5800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b000, full size b000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f775e000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f775e000) AtapiVirtToPhysAddr_: f775e000 -> 00000000:00e0f000 ph data[0]=0:e0f000 (fff) get Phys(data[n=1]=f775f000) AtapiVirtToPhysAddr_: f775f000 -> 00000000:00e10000 set TERM ph data[0]=0:e0f000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 ac 74 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\vgamp.sys at F7759000 with 9 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 Formatted registry key '\Registry\Machine\System\CurrentControlSet\Services\VGA' -> '\Registry\Machine\System\CurrentControlSet\Hardware Profiles\Current\System\CurrentControlSet\Services\VGA\Device0' (../../win32ss/drivers/videoprt/registry.c:381) IoOpenDeviceRegistryKey failed: status 0xc0000010 (../../win32ss/drivers/videoprt/registry.c:312) Failed to open device software key. Status 0xc0000010 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: VGA TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f774d000, count b000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f774d000) AtapiVirtToPhysAddr_: f774d000 -> 00000000:00e5c000 ph data[0]=0:e5c000 (fff) get Phys(data[n=1]=f774e000) AtapiVirtToPhysAddr_: f774e000 -> 00000000:00e5d000 ph data[0]=0:e5c000 (1fff) get Phys(data[n=1]=f774f000) AtapiVirtToPhysAddr_: f774f000 -> 00000000:00e5e000 ph data[0]=0:e5c000 (2fff) get Phys(data[n=1]=f7750000) AtapiVirtToPhysAddr_: f7750000 -> 00000000:00e1f000 ph data[1]=0:e1f000 (fff) get Phys(data[n=2]=f7751000) AtapiVirtToPhysAddr_: f7751000 -> 00000000:00e20000 ph data[1]=0:e1f000 (1fff) get Phys(data[n=2]=f7752000) AtapiVirtToPhysAddr_: f7752000 -> 00000000:00e21000 ph data[1]=0:e1f000 (2fff) get Phys(data[n=2]=f7753000) AtapiVirtToPhysAddr_: f7753000 -> 00000000:00e22000 ph data[1]=0:e1f000 (3fff) get Phys(data[n=2]=f7754000) AtapiVirtToPhysAddr_: f7754000 -> 00000000:00e23000 ph data[1]=0:e1f000 (4fff) get Phys(data[n=2]=f7755000) AtapiVirtToPhysAddr_: f7755000 -> 00000000:00e24000 ph data[1]=0:e1f000 (5fff) get Phys(data[n=2]=f7756000) AtapiVirtToPhysAddr_: f7756000 -> 00000000:00e25000 ph data[1]=0:e1f000 (6fff) get Phys(data[n=2]=f7757000) AtapiVirtToPhysAddr_: f7757000 -> 00000000:00e26000 set TERM ph data[1]=0:e1f000 (7fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 ca 00 00 16 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/usb_device.cpp:865) Dumping ConfigurationDescriptor B2450000 (../../lib/drivers/libusb/usb_device.cpp:866) bLength 9 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 5800, WordsLeft 5800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered b000, full size b000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7755000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7755000) AtapiVirtToPhysAddr_: f7755000 -> 00000000:00e1c000 ph data[0]=0:e1c000 (fff) get Phys(data[n=1]=f7756000) AtapiVirtToPhysAddr_: f7756000 -> 00000000:00e1d000 set TERM ph data[0]=0:e1c000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 ca 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\msfs.sys at F7752000 with 7 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: MSFS TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7730000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7730000) AtapiVirtToPhysAddr_: f7730000 -> 00000000:02fe5000 ph data[0]=0:2fe5000 (fff) get Phys(data[n=1]=f7731000) AtapiVirtToPhysAddr_: f7731000 -> 00000000:02fe6000 ph data[0]=0:2fe5000 (1fff) get Phys(data[n=1]=f7732000) AtapiVirtToPhysAddr_: f7732000 -> 00000000:02fe7000 ph data[0]=0:2fe5000 (2fff) get Phys(data[n=1]=f7733000) AtapiVirtToPhysAddr_: f7733000 -> 00000000:02fe8000 ph data[0]=0:2fe5000 (3fff) get Phys(data[n=1]=f7734000) AtapiVirtToPhysAddr_: f7734000 -> 00000000:02fe9000 ph data[0]=0:2fe5000 (4fff) get Phys(data[n=1]=f7735000) AtapiVirtToPhysAddr_: f7735000 -> 00000000:02fea000 ph data[0]=0:2fe5000 (5fff) get Phys(data[n=1]=f7736000) AtapiVirtToPhysAddr_: f7736000 -> 00000000:02feb000 ph data[0]=0:2fe5000 (6fff) get Phys(data[n=1]=f7737000) AtapiVirtToPhysAddr_: f7737000 -> 00000000:02fec000 ph data[0]=0:2fe5000 (7fff) get Phys(data[n=1]=f7738000) AtapiVirtToPhysAddr_: f7738000 -> 00000000:02fed000 ph data[0]=0:2fe5000 (8fff) get Phys(data[n=1]=f7739000) AtapiVirtToPhysAddr_: f7739000 -> 00000000:02fee000 ph data[0]=0:2fe5000 (9fff) get Phys(data[n=1]=f773a000) AtapiVirtToPhysAddr_: f773a000 -> 00000000:02fef000 ph data[0]=0:2fe5000 (afff) get Phys(data[n=1]=f773b000) AtapiVirtToPhysAddr_: f773b000 -> 00000000:02ff0000 ph data[0]=0:2fe5000 (bfff) get Phys(data[n=1]=f773c000) AtapiVirtToPhysAddr_: f773c000 -> 00000000:02ff1000 ph data[0]=0:2fe5000 (cfff) get Phys(data[n=1]=f773d000) AtapiVirtToPhysAddr_: f773d000 -> 00000000:02ff2000 ph data[0]=0:2fe5000 (dfff) get Phys(data[n=1]=f773e000) AtapiVirtToPhysAddr_: f773e000 -> 00000000:02ff3000 ph data[0]=0:2fe5000 (efff) get Phys(data[n=1]=f773f000) AtapiVirtToPhysAddr_: f773f000 -> 00000000:02ff4000 set TERM ph data[0]=0:2fe5000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a4 c8 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../ntoskrnl/ex/work.c:351) EX: Work Queue Deadlock detected: 1 (../../ntoskrnl/ex/work.c:353) Dynamic threads queued 1 (../../lib/drivers/libusb/usb_device.cpp:867) bDescriptorType 2 (../../lib/drivers/libusb/usb_device.cpp:868) wTotalLength 22 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7740000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7740000) AtapiVirtToPhysAddr_: f7740000 -> 00000000:02ff5000 ph data[0]=0:2ff5000 (fff) get Phys(data[n=1]=f7741000) AtapiVirtToPhysAddr_: f7741000 -> 00000000:02ff6000 ph data[0]=0:2ff5000 (1fff) get Phys(data[n=1]=f7742000) AtapiVirtToPhysAddr_: f7742000 -> 00000000:02ff7000 ph data[0]=0:2ff5000 (2fff) get Phys(data[n=1]=f7743000) AtapiVirtToPhysAddr_: f7743000 -> 00000000:02ff8000 ph data[0]=0:2ff5000 (3fff) get Phys(data[n=1]=f7744000) AtapiVirtToPhysAddr_: f7744000 -> 00000000:02ff9000 ph data[0]=0:2ff5000 (4fff) get Phys(data[n=1]=f7745000) AtapiVirtToPhysAddr_: f7745000 -> 00000000:02ffa000 ph data[0]=0:2ff5000 (5fff) get Phys(data[n=1]=f7746000) AtapiVirtToPhysAddr_: f7746000 -> 00000000:02ffb000 ph data[0]=0:2ff5000 (6fff) get Phys(data[n=1]=f7747000) AtapiVirtToPhysAddr_: f7747000 -> 00000000:02ffc000 ph data[0]=0:2ff5000 (7fff) get Phys(data[n=1]=f7748000) AtapiVirtToPhysAddr_: f7748000 -> 00000000:02ffd000 ph data[0]=0:2ff5000 (8fff) get Phys(data[n=1]=f7749000) AtapiVirtToPhysAddr_: f7749000 -> 00000000:02ffe000 ph data[0]=0:2ff5000 (9fff) get Phys(data[n=1]=f774a000) AtapiVirtToPhysAddr_: f774a000 -> 00000000:02fbf000 ph data[1]=0:2fbf000 (fff) get Phys(data[n=2]=f774b000) AtapiVirtToPhysAddr_: f774b000 -> 00000000:02ec0000 ph data[2]=0:2ec0000 (fff) get Phys(data[n=3]=f774c000) AtapiVirtToPhysAddr_: f774c000 -> 00000000:02f01000 ph data[3]=0:2f01000 (fff) get Phys(data[n=4]=f774d000) AtapiVirtToPhysAddr_: f774d000 -> 00000000:02f42000 ph data[4]=0:2f42000 (fff) get Phys(data[n=5]=f774e000) AtapiVirtToPhysAddr_: f774e000 -> 00000000:02f43000 ph data[4]=0:2f42000 (1fff) get Phys(data[n=5]=f774f000) AtapiVirtToPhysAddr_: f774f000 -> 00000000:02f44000 set TERM ph data[4]=0:2f42000 (2fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x5, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a4 e8 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7750000, count 1000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7750000) AtapiVirtToPhysAddr_: f7750000 -> 00000000:02f45000 set TERM ph data[0]=0:2f45000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a5 08 00 00 02 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f774e000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f774e000) AtapiVirtToPhysAddr_: f774e000 -> 00000000:02fa8000 ph data[0]=0:2fa8000 (fff) get Phys(data[n=1]=f774f000) AtapiVirtToPhysAddr_: f774f000 -> 00000000:02fa9000 set TERM ph data[0]=0:2fa8000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a4 c8 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\npfs.sys at F7740000 with 12 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: NPFS TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7731000, count e000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7731000) AtapiVirtToPhysAddr_: f7731000 -> 00000000:02fbe000 ph data[0]=0:2fbe000 (fff) get Phys(data[n=1]=f7732000) AtapiVirtToPhysAddr_: f7732000 -> 00000000:02f7f000 ph data[1]=0:2f7f000 (fff) get Phys(data[n=2]=f7733000) AtapiVirtToPhysAddr_: f7733000 -> 00000000:02e80000 ph data[2]=0:2e80000 (fff) get Phys(data[n=3]=f7734000) AtapiVirtToPhysAddr_: f7734000 -> 00000000:02ec1000 ph data[3]=0:2ec1000 (fff) get Phys(data[n=4]=f7735000) AtapiVirtToPhysAddr_: f7735000 -> 00000000:02f02000 ph data[4]=0:2f02000 (fff) get Phys(data[n=5]=f7736000) AtapiVirtToPhysAddr_: f7736000 -> 00000000:02f03000 ph data[4]=0:2f02000 (1fff) get Phys(data[n=5]=f7737000) AtapiVirtToPhysAddr_: f7737000 -> 00000000:02f04000 ph data[4]=0:2f02000 (2fff) get Phys(data[n=5]=f7738000) AtapiVirtToPhysAddr_: f7738000 -> 00000000:02f05000 ph data[4]=0:2f02000 (3fff) get Phys(data[n=5]=f7739000) AtapiVirtToPhysAddr_: f7739000 -> 00000000:02f06000 ph data[4]=0:2f02000 (4fff) get Phys(data[n=5]=f773a000) AtapiVirtToPhysAddr_: f773a000 -> 00000000:02f07000 ph data[4]=0:2f02000 (5fff) get Phys(data[n=5]=f773b000) AtapiVirtToPhysAddr_: f773b000 -> 00000000:02f48000 ph data[5]=0:2f48000 (fff) get Phys(data[n=6]=f773c000) AtapiVirtToPhysAddr_: f773c000 -> 00000000:02f49000 ph data[5]=0:2f48000 (1fff) get Phys(data[n=6]=f773d000) AtapiVirtToPhysAddr_: f773d000 -> 00000000:02f4a000 ph data[5]=0:2f48000 (2fff) get Phys(data[n=6]=f773e000) AtapiVirtToPhysAddr_: f773e000 -> 00000000:02f0b000 set TERM ph data[6]=0:2f0b000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x7, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a4 72 00 00 1c 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 7000, WordsLeft 7000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e000, full size e000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f773c000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f773c000) AtapiVirtToPhysAddr_: f773c000 -> 00000000:02f7e000 ph data[0]=0:2f7e000 (fff) get Phys(data[n=1]=f773d000) AtapiVirtToPhysAddr_: f773d000 -> 00000000:02f3f000 set TERM ph data[1]=0:2f3f000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a4 72 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\ndisuio.sys at F7736000 with a pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../drivers/network/ndis/ndis/protocol.c:981)(ndisBindMiniportsToProtocol) Performing global bind for protocol 'NDISUIO' (../../drivers/network/ndisuio/protocol.c:57) NetPnPEvent unimplemented for net event 0x6 (../../drivers/network/ndisuio/main.c:102) NDISUIO: Loaded (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: NDISUIO TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76ff000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76ff000) AtapiVirtToPhysAddr_: f76ff000 -> 00000000:02ecc000 ph data[0]=0:2ecc000 (fff) get Phys(data[n=1]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:02ecd000 ph data[0]=0:2ecc000 (1fff) get Phys(data[n=1]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02f0e000 ph data[1]=0:2f0e000 (fff) get Phys(data[n=2]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02f0f000 ph data[1]=0:2f0e000 (1fff) get Phys(data[n=2]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:02f10000 ph data[1]=0:2f0e000 (2fff) get Phys(data[n=2]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:02f11000 ph data[1]=0:2f0e000 (3fff) get Phys(data[n=2]=f7705000) AtapiVirtToPhysAddr_: f7705000 -> 00000000:02f12000 ph data[1]=0:2f0e000 (4fff) get Phys(data[n=2]=f7706000) AtapiVirtToPhysAddr_: f7706000 -> 00000000:02f13000 ph data[1]=0:2f0e000 (5fff) get Phys(data[n=2]=f7707000) AtapiVirtToPhysAddr_: f7707000 -> 00000000:02f14000 ph data[1]=0:2f0e000 (6fff) get Phys(data[n=2]=f7708000) AtapiVirtToPhysAddr_: f7708000 -> 00000000:02f15000 ph data[1]=0:2f0e000 (7fff) get Phys(data[n=2]=f7709000) AtapiVirtToPhysAddr_: f7709000 -> 00000000:02f16000 ph data[1]=0:2f0e000 (8fff) get Phys(data[n=2]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:02f17000 ph data[1]=0:2f0e000 (9fff) get Phys(data[n=2]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:02f18000 ph data[1]=0:2f0e000 (afff) get Phys(data[n=2]=f770c000) AtapiVirtToPhysAddr_: f770c000 -> 00000000:02f19000 ph data[1]=0:2f0e000 (bfff) get Phys(data[n=2]=f770d000) AtapiVirtToPhysAddr_: f770d000 -> 00000000:02f1a000 ph data[1]=0:2f0e000 (cfff) get Phys(data[n=2]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:02f5b000 set TERM ph data[2]=0:2f5b000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 98 e3 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request (../../ntoskrnl/ex/work.c:351) EX: Work Queue Deadlock detected: 1 (../../ntoskrnl/ex/work.c:353) Dynamic threads queued 2 (../../lib/drivers/libusb/usb_device.cpp:869) bNumInterfaces 1 (../../lib/drivers/libusb/usb_device.cpp:870) bConfigurationValue 1 (../../lib/drivers/libusb/usb_device.cpp:871) iConfiguration 0 (../../lib/drivers/libusb/usb_device.cpp:872) bmAttributes 80 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f770f000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:02f5c000 ph data[0]=0:2f5c000 (fff) get Phys(data[n=1]=f7710000) AtapiVirtToPhysAddr_: f7710000 -> 00000000:02f5d000 ph data[0]=0:2f5c000 (1fff) get Phys(data[n=1]=f7711000) AtapiVirtToPhysAddr_: f7711000 -> 00000000:02f5e000 ph data[0]=0:2f5c000 (2fff) get Phys(data[n=1]=f7712000) AtapiVirtToPhysAddr_: f7712000 -> 00000000:02f1f000 ph data[1]=0:2f1f000 (fff) get Phys(data[n=2]=f7713000) AtapiVirtToPhysAddr_: f7713000 -> 00000000:02f20000 ph data[1]=0:2f1f000 (1fff) get Phys(data[n=2]=f7714000) AtapiVirtToPhysAddr_: f7714000 -> 00000000:02f21000 ph data[1]=0:2f1f000 (2fff) get Phys(data[n=2]=f7715000) AtapiVirtToPhysAddr_: f7715000 -> 00000000:02f22000 ph data[1]=0:2f1f000 (3fff) get Phys(data[n=2]=f7716000) AtapiVirtToPhysAddr_: f7716000 -> 00000000:02f23000 ph data[1]=0:2f1f000 (4fff) get Phys(data[n=2]=f7717000) AtapiVirtToPhysAddr_: f7717000 -> 00000000:02f24000 ph data[1]=0:2f1f000 (5fff) get Phys(data[n=2]=f7718000) AtapiVirtToPhysAddr_: f7718000 -> 00000000:02f25000 ph data[1]=0:2f1f000 (6fff) get Phys(data[n=2]=f7719000) AtapiVirtToPhysAddr_: f7719000 -> 00000000:02f26000 ph data[1]=0:2f1f000 (7fff) get Phys(data[n=2]=f771a000) AtapiVirtToPhysAddr_: f771a000 -> 00000000:02f27000 ph data[1]=0:2f1f000 (8fff) get Phys(data[n=2]=f771b000) AtapiVirtToPhysAddr_: f771b000 -> 00000000:02f28000 ph data[1]=0:2f1f000 (9fff) get Phys(data[n=2]=f771c000) AtapiVirtToPhysAddr_: f771c000 -> 00000000:02f29000 ph data[1]=0:2f1f000 (afff) get Phys(data[n=2]=f771d000) AtapiVirtToPhysAddr_: f771d000 -> 00000000:02f2a000 ph data[1]=0:2f1f000 (bfff) get Phys(data[n=2]=f771e000) AtapiVirtToPhysAddr_: f771e000 -> 00000000:02f2b000 set TERM ph data[1]=0:2f1f000 (cfff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 03 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f771f000, count d000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f771f000) AtapiVirtToPhysAddr_: f771f000 -> 00000000:02f2c000 ph data[0]=0:2f2c000 (fff) get Phys(data[n=1]=f7720000) AtapiVirtToPhysAddr_: f7720000 -> 00000000:02f2d000 ph data[0]=0:2f2c000 (1fff) get Phys(data[n=1]=f7721000) AtapiVirtToPhysAddr_: f7721000 -> 00000000:02f2e000 ph data[0]=0:2f2c000 (2fff) get Phys(data[n=1]=f7722000) AtapiVirtToPhysAddr_: f7722000 -> 00000000:02f2f000 ph data[0]=0:2f2c000 (3fff) get Phys(data[n=1]=f7723000) AtapiVirtToPhysAddr_: f7723000 -> 00000000:02f30000 ph data[0]=0:2f2c000 (4fff) get Phys(data[n=1]=f7724000) AtapiVirtToPhysAddr_: f7724000 -> 00000000:02f31000 ph data[0]=0:2f2c000 (5fff) get Phys(data[n=1]=f7725000) AtapiVirtToPhysAddr_: f7725000 -> 00000000:02f32000 ph data[0]=0:2f2c000 (6fff) get Phys(data[n=1]=f7726000) AtapiVirtToPhysAddr_: f7726000 -> 00000000:02f33000 ph data[0]=0:2f2c000 (7fff) get Phys(data[n=1]=f7727000) AtapiVirtToPhysAddr_: f7727000 -> 00000000:02f34000 ph data[0]=0:2f2c000 (8fff) get Phys(data[n=1]=f7728000) AtapiVirtToPhysAddr_: f7728000 -> 00000000:02f35000 ph data[0]=0:2f2c000 (9fff) get Phys(data[n=1]=f7729000) AtapiVirtToPhysAddr_: f7729000 -> 00000000:02f36000 ph data[0]=0:2f2c000 (afff) get Phys(data[n=1]=f772a000) AtapiVirtToPhysAddr_: f772a000 -> 00000000:02f37000 ph data[0]=0:2f2c000 (bfff) get Phys(data[n=1]=f772b000) AtapiVirtToPhysAddr_: f772b000 -> 00000000:02f38000 set TERM ph data[0]=0:2f2c000 (cfff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 99 23 00 00 1a 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 6800, WordsLeft 6800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered d000, full size d000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7728000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7728000) AtapiVirtToPhysAddr_: f7728000 -> 00000000:02ecf000 ph data[0]=0:2ecf000 (fff) get Phys(data[n=1]=f7729000) AtapiVirtToPhysAddr_: f7729000 -> 00000000:02ed0000 set TERM ph data[0]=0:2ecf000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 98 e3 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\afd.sys at F7712000 with 1a pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: AFD (../../ntoskrnl/io/iomgr/file.c:438) Using IopParseDevice() hack. Requested invalid attributes: 1 (../../ntoskrnl/io/iomgr/file.c:438) Using IopParseDevice() hack. Requested invalid attributes: 1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849668 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7735000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7735000) AtapiVirtToPhysAddr_: f7735000 -> 00000000:04d0a000 set TERM ph data[0]=0:4d0a000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2457bb0, CDB 0xb2457be0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457bb0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78496d0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7735620, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7735620) AtapiVirtToPhysAddr_: f7735620 -> 00000000:04f7e620 set TERM ph data[0]=0:4f7e620 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457bb0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457bb0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457bb0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf7849668 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7735000, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7735000) AtapiVirtToPhysAddr_: f7735000 -> 00000000:04d1e000 set TERM ph data[0]=0:4d1e000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb2457348, CDB 0xb2457378, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2457348 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf78496d0 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7735620, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7735620) AtapiVirtToPhysAddr_: f7735620 -> 00000000:04f7e620 set TERM ph data[0]=0:4f7e620 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 00 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x0, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2457348 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2457348, status 1 AtapiInterrupt: RequestComplete, srb 0xb2457348 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d2000) AtapiVirtToPhysAddr_: f76d2000 -> 00000000:02ef4000 ph data[0]=0:2ef4000 (fff) get Phys(data[n=1]=f76d3000) AtapiVirtToPhysAddr_: f76d3000 -> 00000000:02ef5000 ph data[0]=0:2ef4000 (1fff) get Phys(data[n=1]=f76d4000) AtapiVirtToPhysAddr_: f76d4000 -> 00000000:02ef6000 ph data[0]=0:2ef4000 (2fff) get Phys(data[n=1]=f76d5000) AtapiVirtToPhysAddr_: f76d5000 -> 00000000:02ef7000 ph data[0]=0:2ef4000 (3fff) get Phys(data[n=1]=f76d6000) AtapiVirtToPhysAddr_: f76d6000 -> 00000000:02ef8000 ph data[0]=0:2ef4000 (4fff) get Phys(data[n=1]=f76d7000) AtapiVirtToPhysAddr_: f76d7000 -> 00000000:02ef9000 ph data[0]=0:2ef4000 (5fff) get Phys(data[n=1]=f76d8000) AtapiVirtToPhysAddr_: f76d8000 -> 00000000:02efa000 ph data[0]=0:2ef4000 (6fff) get Phys(data[n=1]=f76d9000) AtapiVirtToPhysAddr_: f76d9000 -> 00000000:02efb000 ph data[0]=0:2ef4000 (7fff) get Phys(data[n=1]=f76da000) AtapiVirtToPhysAddr_: f76da000 -> 00000000:02efc000 ph data[0]=0:2ef4000 (8fff) get Phys(data[n=1]=f76db000) AtapiVirtToPhysAddr_: f76db000 -> 00000000:02efd000 ph data[0]=0:2ef4000 (9fff) get Phys(data[n=1]=f76dc000) AtapiVirtToPhysAddr_: f76dc000 -> 00000000:02efe000 ph data[0]=0:2ef4000 (afff) get Phys(data[n=1]=f76dd000) AtapiVirtToPhysAddr_: f76dd000 -> 00000000:02ebf000 ph data[1]=0:2ebf000 (fff) get Phys(data[n=2]=f76de000) AtapiVirtToPhysAddr_: f76de000 -> 00000000:02dc0000 ph data[2]=0:2dc0000 (fff) get Phys(data[n=3]=f76df000) AtapiVirtToPhysAddr_: f76df000 -> 00000000:02e01000 ph data[3]=0:2e01000 (fff) get Phys(data[n=4]=f76e0000) AtapiVirtToPhysAddr_: f76e0000 -> 00000000:02e42000 ph data[4]=0:2e42000 (fff) get Phys(data[n=5]=f76e1000) AtapiVirtToPhysAddr_: f76e1000 -> 00000000:02e43000 set TERM ph data[4]=0:2e42000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x5, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a 5e 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../ntoskrnl/ex/work.c:351) EX: Work Queue Deadlock detected: 1 (../../ntoskrnl/ex/work.c:353) Dynamic threads queued 3 (../../lib/drivers/libusb/usb_device.cpp:873) MaxPower 32 (../../drivers/usb/usbhub/fdo.c:782) IsCompositeDevice bNumInterfaces 1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76e2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76e2000) AtapiVirtToPhysAddr_: f76e2000 -> 00000000:02e44000 ph data[0]=0:2e44000 (fff) get Phys(data[n=1]=f76e3000) AtapiVirtToPhysAddr_: f76e3000 -> 00000000:02e45000 ph data[0]=0:2e44000 (1fff) get Phys(data[n=1]=f76e4000) AtapiVirtToPhysAddr_: f76e4000 -> 00000000:02e46000 ph data[0]=0:2e44000 (2fff) get Phys(data[n=1]=f76e5000) AtapiVirtToPhysAddr_: f76e5000 -> 00000000:02e47000 ph data[0]=0:2e44000 (3fff) get Phys(data[n=1]=f76e6000) AtapiVirtToPhysAddr_: f76e6000 -> 00000000:02e88000 ph data[1]=0:2e88000 (fff) get Phys(data[n=2]=f76e7000) AtapiVirtToPhysAddr_: f76e7000 -> 00000000:02e89000 ph data[1]=0:2e88000 (1fff) get Phys(data[n=2]=f76e8000) AtapiVirtToPhysAddr_: f76e8000 -> 00000000:02e8a000 ph data[1]=0:2e88000 (2fff) get Phys(data[n=2]=f76e9000) AtapiVirtToPhysAddr_: f76e9000 -> 00000000:02e4b000 ph data[2]=0:2e4b000 (fff) get Phys(data[n=3]=f76ea000) AtapiVirtToPhysAddr_: f76ea000 -> 00000000:02e4c000 ph data[2]=0:2e4b000 (1fff) get Phys(data[n=3]=f76eb000) AtapiVirtToPhysAddr_: f76eb000 -> 00000000:02e4d000 ph data[2]=0:2e4b000 (2fff) get Phys(data[n=3]=f76ec000) AtapiVirtToPhysAddr_: f76ec000 -> 00000000:02e8e000 ph data[3]=0:2e8e000 (fff) get Phys(data[n=4]=f76ed000) AtapiVirtToPhysAddr_: f76ed000 -> 00000000:02e8f000 ph data[3]=0:2e8e000 (1fff) get Phys(data[n=4]=f76ee000) AtapiVirtToPhysAddr_: f76ee000 -> 00000000:02e90000 ph data[3]=0:2e8e000 (2fff) get Phys(data[n=4]=f76ef000) AtapiVirtToPhysAddr_: f76ef000 -> 00000000:02e91000 ph data[3]=0:2e8e000 (3fff) get Phys(data[n=4]=f76f0000) AtapiVirtToPhysAddr_: f76f0000 -> 00000000:02e92000 ph data[3]=0:2e8e000 (4fff) get Phys(data[n=4]=f76f1000) AtapiVirtToPhysAddr_: f76f1000 -> 00000000:02e93000 set TERM ph data[3]=0:2e8e000 (5fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x4, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a 7e 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f2000) AtapiVirtToPhysAddr_: f76f2000 -> 00000000:02e94000 ph data[0]=0:2e94000 (fff) get Phys(data[n=1]=f76f3000) AtapiVirtToPhysAddr_: f76f3000 -> 00000000:02e95000 ph data[0]=0:2e94000 (1fff) get Phys(data[n=1]=f76f4000) AtapiVirtToPhysAddr_: f76f4000 -> 00000000:02e96000 ph data[0]=0:2e94000 (2fff) get Phys(data[n=1]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:02e97000 ph data[0]=0:2e94000 (3fff) get Phys(data[n=1]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:02e98000 ph data[0]=0:2e94000 (4fff) get Phys(data[n=1]=f76f7000) AtapiVirtToPhysAddr_: f76f7000 -> 00000000:02e99000 ph data[0]=0:2e94000 (5fff) get Phys(data[n=1]=f76f8000) AtapiVirtToPhysAddr_: f76f8000 -> 00000000:02e9a000 ph data[0]=0:2e94000 (6fff) get Phys(data[n=1]=f76f9000) AtapiVirtToPhysAddr_: f76f9000 -> 00000000:02edb000 ph data[1]=0:2edb000 (fff) get Phys(data[n=2]=f76fa000) AtapiVirtToPhysAddr_: f76fa000 -> 00000000:02edc000 ph data[1]=0:2edb000 (1fff) get Phys(data[n=2]=f76fb000) AtapiVirtToPhysAddr_: f76fb000 -> 00000000:02edd000 ph data[1]=0:2edb000 (2fff) get Phys(data[n=2]=f76fc000) AtapiVirtToPhysAddr_: f76fc000 -> 00000000:02ede000 ph data[1]=0:2edb000 (3fff) get Phys(data[n=2]=f76fd000) AtapiVirtToPhysAddr_: f76fd000 -> 00000000:02e9f000 ph data[2]=0:2e9f000 (fff) get Phys(data[n=3]=f76fe000) AtapiVirtToPhysAddr_: f76fe000 -> 00000000:02ea0000 ph data[2]=0:2e9f000 (1fff) get Phys(data[n=3]=f76ff000) AtapiVirtToPhysAddr_: f76ff000 -> 00000000:02ea1000 ph data[2]=0:2e9f000 (2fff) get Phys(data[n=3]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:02ea2000 ph data[2]=0:2e9f000 (3fff) get Phys(data[n=3]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02ea3000 set TERM ph data[2]=0:2e9f000 (4fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a 9e 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7702000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02ea4000 ph data[0]=0:2ea4000 (fff) get Phys(data[n=1]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:02ea5000 ph data[0]=0:2ea4000 (1fff) get Phys(data[n=1]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:02ea6000 ph data[0]=0:2ea4000 (2fff) get Phys(data[n=1]=f7705000) AtapiVirtToPhysAddr_: f7705000 -> 00000000:02ea7000 ph data[0]=0:2ea4000 (3fff) get Phys(data[n=1]=f7706000) AtapiVirtToPhysAddr_: f7706000 -> 00000000:02ea8000 ph data[0]=0:2ea4000 (4fff) get Phys(data[n=1]=f7707000) AtapiVirtToPhysAddr_: f7707000 -> 00000000:02ea9000 ph data[0]=0:2ea4000 (5fff) get Phys(data[n=1]=f7708000) AtapiVirtToPhysAddr_: f7708000 -> 00000000:02eaa000 ph data[0]=0:2ea4000 (6fff) get Phys(data[n=1]=f7709000) AtapiVirtToPhysAddr_: f7709000 -> 00000000:02eab000 ph data[0]=0:2ea4000 (7fff) get Phys(data[n=1]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:02eac000 ph data[0]=0:2ea4000 (8fff) get Phys(data[n=1]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:02ead000 ph data[0]=0:2ea4000 (9fff) get Phys(data[n=1]=f770c000) AtapiVirtToPhysAddr_: f770c000 -> 00000000:02eae000 ph data[0]=0:2ea4000 (afff) get Phys(data[n=1]=f770d000) AtapiVirtToPhysAddr_: f770d000 -> 00000000:02eaf000 ph data[0]=0:2ea4000 (bfff) get Phys(data[n=1]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:02eb0000 ph data[0]=0:2ea4000 (cfff) get Phys(data[n=1]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:02eb1000 ph data[0]=0:2ea4000 (dfff) get Phys(data[n=1]=f7710000) AtapiVirtToPhysAddr_: f7710000 -> 00000000:02eb2000 ph data[0]=0:2ea4000 (efff) get Phys(data[n=1]=f7711000) AtapiVirtToPhysAddr_: f7711000 -> 00000000:02eb3000 set TERM ph data[0]=0:2ea4000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a be 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f770e000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:02eb7000 ph data[0]=0:2eb7000 (fff) get Phys(data[n=1]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:02eb8000 set TERM ph data[0]=0:2eb7000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a 5e 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d2000) AtapiVirtToPhysAddr_: f76d2000 -> 00000000:02ebc000 ph data[0]=0:2ebc000 (fff) get Phys(data[n=1]=f76d3000) AtapiVirtToPhysAddr_: f76d3000 -> 00000000:02ebd000 ph data[0]=0:2ebc000 (1fff) get Phys(data[n=1]=f76d4000) AtapiVirtToPhysAddr_: f76d4000 -> 00000000:02ebe000 ph data[0]=0:2ebc000 (2fff) get Phys(data[n=1]=f76d5000) AtapiVirtToPhysAddr_: f76d5000 -> 00000000:02e7f000 ph data[1]=0:2e7f000 (fff) get Phys(data[n=2]=f76d6000) AtapiVirtToPhysAddr_: f76d6000 -> 00000000:02d80000 ph data[2]=0:2d80000 (fff) get Phys(data[n=3]=f76d7000) AtapiVirtToPhysAddr_: f76d7000 -> 00000000:02dc1000 ph data[3]=0:2dc1000 (fff) get Phys(data[n=4]=f76d8000) AtapiVirtToPhysAddr_: f76d8000 -> 00000000:02dc2000 ph data[3]=0:2dc1000 (1fff) get Phys(data[n=4]=f76d9000) AtapiVirtToPhysAddr_: f76d9000 -> 00000000:02dc3000 ph data[3]=0:2dc1000 (2fff) get Phys(data[n=4]=f76da000) AtapiVirtToPhysAddr_: f76da000 -> 00000000:02e04000 ph data[4]=0:2e04000 (fff) get Phys(data[n=5]=f76db000) AtapiVirtToPhysAddr_: f76db000 -> 00000000:02e05000 ph data[4]=0:2e04000 (1fff) get Phys(data[n=5]=f76dc000) AtapiVirtToPhysAddr_: f76dc000 -> 00000000:02e06000 ph data[4]=0:2e04000 (2fff) get Phys(data[n=5]=f76dd000) AtapiVirtToPhysAddr_: f76dd000 -> 00000000:02e07000 ph data[4]=0:2e04000 (3fff) get Phys(data[n=5]=f76de000) AtapiVirtToPhysAddr_: f76de000 -> 00000000:02e48000 ph data[5]=0:2e48000 (fff) get Phys(data[n=6]=f76df000) AtapiVirtToPhysAddr_: f76df000 -> 00000000:02e49000 ph data[5]=0:2e48000 (1fff) get Phys(data[n=6]=f76e0000) AtapiVirtToPhysAddr_: f76e0000 -> 00000000:02e4a000 ph data[5]=0:2e48000 (2fff) get Phys(data[n=6]=f76e1000) AtapiVirtToPhysAddr_: f76e1000 -> 00000000:02e0b000 set TERM ph data[6]=0:2e0b000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x7, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a de 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76e2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76e2000) AtapiVirtToPhysAddr_: f76e2000 -> 00000000:02e0c000 ph data[0]=0:2e0c000 (fff) get Phys(data[n=1]=f76e3000) AtapiVirtToPhysAddr_: f76e3000 -> 00000000:02e0d000 ph data[0]=0:2e0c000 (1fff) get Phys(data[n=1]=f76e4000) AtapiVirtToPhysAddr_: f76e4000 -> 00000000:02e4e000 ph data[1]=0:2e4e000 (fff) get Phys(data[n=2]=f76e5000) AtapiVirtToPhysAddr_: f76e5000 -> 00000000:02e4f000 ph data[1]=0:2e4e000 (1fff) get Phys(data[n=2]=f76e6000) AtapiVirtToPhysAddr_: f76e6000 -> 00000000:02e50000 ph data[1]=0:2e4e000 (2fff) get Phys(data[n=2]=f76e7000) AtapiVirtToPhysAddr_: f76e7000 -> 00000000:02e51000 ph data[1]=0:2e4e000 (3fff) get Phys(data[n=2]=f76e8000) AtapiVirtToPhysAddr_: f76e8000 -> 00000000:02e52000 ph data[1]=0:2e4e000 (4fff) get Phys(data[n=2]=f76e9000) AtapiVirtToPhysAddr_: f76e9000 -> 00000000:02e53000 ph data[1]=0:2e4e000 (5fff) get Phys(data[n=2]=f76ea000) AtapiVirtToPhysAddr_: f76ea000 -> 00000000:02e54000 ph data[1]=0:2e4e000 (6fff) get Phys(data[n=2]=f76eb000) AtapiVirtToPhysAddr_: f76eb000 -> 00000000:02e55000 ph data[1]=0:2e4e000 (7fff) get Phys(data[n=2]=f76ec000) AtapiVirtToPhysAddr_: f76ec000 -> 00000000:02e56000 ph data[1]=0:2e4e000 (8fff) get Phys(data[n=2]=f76ed000) AtapiVirtToPhysAddr_: f76ed000 -> 00000000:02e57000 ph data[1]=0:2e4e000 (9fff) get Phys(data[n=2]=f76ee000) AtapiVirtToPhysAddr_: f76ee000 -> 00000000:02e58000 ph data[1]=0:2e4e000 (afff) get Phys(data[n=2]=f76ef000) AtapiVirtToPhysAddr_: f76ef000 -> 00000000:02e59000 ph data[1]=0:2e4e000 (bfff) get Phys(data[n=2]=f76f0000) AtapiVirtToPhysAddr_: f76f0000 -> 00000000:02e5a000 ph data[1]=0:2e4e000 (cfff) get Phys(data[n=2]=f76f1000) AtapiVirtToPhysAddr_: f76f1000 -> 00000000:02e9b000 set TERM ph data[2]=0:2e9b000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1a fe 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f2000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f2000) AtapiVirtToPhysAddr_: f76f2000 -> 00000000:02e9c000 ph data[0]=0:2e9c000 (fff) get Phys(data[n=1]=f76f3000) AtapiVirtToPhysAddr_: f76f3000 -> 00000000:02e9d000 ph data[0]=0:2e9c000 (1fff) get Phys(data[n=1]=f76f4000) AtapiVirtToPhysAddr_: f76f4000 -> 00000000:02e9e000 ph data[0]=0:2e9c000 (2fff) get Phys(data[n=1]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:02e5f000 ph data[1]=0:2e5f000 (fff) get Phys(data[n=2]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:02e60000 ph data[1]=0:2e5f000 (1fff) get Phys(data[n=2]=f76f7000) AtapiVirtToPhysAddr_: f76f7000 -> 00000000:02e61000 ph data[1]=0:2e5f000 (2fff) get Phys(data[n=2]=f76f8000) AtapiVirtToPhysAddr_: f76f8000 -> 00000000:02e62000 ph data[1]=0:2e5f000 (3fff) get Phys(data[n=2]=f76f9000) AtapiVirtToPhysAddr_: f76f9000 -> 00000000:02e63000 ph data[1]=0:2e5f000 (4fff) get Phys(data[n=2]=f76fa000) AtapiVirtToPhysAddr_: f76fa000 -> 00000000:02e64000 ph data[1]=0:2e5f000 (5fff) get Phys(data[n=2]=f76fb000) AtapiVirtToPhysAddr_: f76fb000 -> 00000000:02e65000 ph data[1]=0:2e5f000 (6fff) get Phys(data[n=2]=f76fc000) AtapiVirtToPhysAddr_: f76fc000 -> 00000000:02e66000 ph data[1]=0:2e5f000 (7fff) get Phys(data[n=2]=f76fd000) AtapiVirtToPhysAddr_: f76fd000 -> 00000000:02e67000 ph data[1]=0:2e5f000 (8fff) get Phys(data[n=2]=f76fe000) AtapiVirtToPhysAddr_: f76fe000 -> 00000000:02e68000 ph data[1]=0:2e5f000 (9fff) get Phys(data[n=2]=f76ff000) AtapiVirtToPhysAddr_: f76ff000 -> 00000000:02e69000 ph data[1]=0:2e5f000 (afff) get Phys(data[n=2]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:02e6a000 ph data[1]=0:2e5f000 (bfff) get Phys(data[n=2]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02e6b000 set TERM ph data[1]=0:2e5f000 (cfff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1b 1e 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7702000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02e6c000 ph data[0]=0:2e6c000 (fff) get Phys(data[n=1]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:02e6d000 ph data[0]=0:2e6c000 (1fff) get Phys(data[n=1]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:02e6e000 ph data[0]=0:2e6c000 (2fff) get Phys(data[n=1]=f7705000) AtapiVirtToPhysAddr_: f7705000 -> 00000000:02e6f000 ph data[0]=0:2e6c000 (3fff) get Phys(data[n=1]=f7706000) AtapiVirtToPhysAddr_: f7706000 -> 00000000:02e70000 ph data[0]=0:2e6c000 (4fff) get Phys(data[n=1]=f7707000) AtapiVirtToPhysAddr_: f7707000 -> 00000000:02e71000 ph data[0]=0:2e6c000 (5fff) get Phys(data[n=1]=f7708000) AtapiVirtToPhysAddr_: f7708000 -> 00000000:02e72000 ph data[0]=0:2e6c000 (6fff) get Phys(data[n=1]=f7709000) AtapiVirtToPhysAddr_: f7709000 -> 00000000:02e73000 ph data[0]=0:2e6c000 (7fff) get Phys(data[n=1]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:02e74000 ph data[0]=0:2e6c000 (8fff) get Phys(data[n=1]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:02e75000 ph data[0]=0:2e6c000 (9fff) get Phys(data[n=1]=f770c000) AtapiVirtToPhysAddr_: f770c000 -> 00000000:02e76000 ph data[0]=0:2e6c000 (afff) get Phys(data[n=1]=f770d000) AtapiVirtToPhysAddr_: f770d000 -> 00000000:02e77000 ph data[0]=0:2e6c000 (bfff) get Phys(data[n=1]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:02e78000 ph data[0]=0:2e6c000 (cfff) get Phys(data[n=1]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:02e79000 ph data[0]=0:2e6c000 (dfff) get Phys(data[n=1]=f7710000) AtapiVirtToPhysAddr_: f7710000 -> 00000000:02e7a000 ph data[0]=0:2e6c000 (efff) get Phys(data[n=1]=f7711000) AtapiVirtToPhysAddr_: f7711000 -> 00000000:02e7b000 set TERM ph data[0]=0:2e6c000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 1b 3e 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../drivers/usb/usbhub/fdo.c:688) StringDesc->bLength 22 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../ntoskrnl/ex/init.c:1959) Free non-cache pages: 3c76c TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f1000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f1000) AtapiVirtToPhysAddr_: f76f1000 -> 00000000:04cd7000 ph data[0]=0:4cd7000 (fff) get Phys(data[n=1]=f76f2000) AtapiVirtToPhysAddr_: f76f2000 -> 00000000:04cd8000 ph data[0]=0:4cd7000 (1fff) get Phys(data[n=1]=f76f3000) AtapiVirtToPhysAddr_: f76f3000 -> 00000000:04cd9000 ph data[0]=0:4cd7000 (2fff) get Phys(data[n=1]=f76f4000) AtapiVirtToPhysAddr_: f76f4000 -> 00000000:04cda000 ph data[0]=0:4cd7000 (3fff) get Phys(data[n=1]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:04cdb000 ph data[0]=0:4cd7000 (4fff) get Phys(data[n=1]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:04cdc000 ph data[0]=0:4cd7000 (5fff) get Phys(data[n=1]=f76f7000) AtapiVirtToPhysAddr_: f76f7000 -> 00000000:04cdd000 ph data[0]=0:4cd7000 (6fff) get Phys(data[n=1]=f76f8000) AtapiVirtToPhysAddr_: f76f8000 -> 00000000:04cde000 ph data[0]=0:4cd7000 (7fff) get Phys(data[n=1]=f76f9000) AtapiVirtToPhysAddr_: f76f9000 -> 00000000:04cdf000 ph data[0]=0:4cd7000 (8fff) get Phys(data[n=1]=f76fa000) AtapiVirtToPhysAddr_: f76fa000 -> 00000000:04ce0000 ph data[0]=0:4cd7000 (9fff) get Phys(data[n=1]=f76fb000) AtapiVirtToPhysAddr_: f76fb000 -> 00000000:04ce1000 ph data[0]=0:4cd7000 (afff) get Phys(data[n=1]=f76fc000) AtapiVirtToPhysAddr_: f76fc000 -> 00000000:04ce2000 ph data[0]=0:4cd7000 (bfff) get Phys(data[n=1]=f76fd000) AtapiVirtToPhysAddr_: f76fd000 -> 00000000:04ce3000 ph data[0]=0:4cd7000 (cfff) get Phys(data[n=1]=f76fe000) AtapiVirtToPhysAddr_: f76fe000 -> 00000000:04ce4000 ph data[0]=0:4cd7000 (dfff) get Phys(data[n=1]=f76ff000) AtapiVirtToPhysAddr_: f76ff000 -> 00000000:04ce5000 ph data[0]=0:4cd7000 (efff) get Phys(data[n=1]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:04ce6000 set TERM ph data[0]=0:4cd7000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 6d 13 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request (../../lib/drivers/libusb/hub_controller.cpp:315) [USBOHCI] SCE Request B2457168 TransferBufferLength 32 Flags 3 MDL 00000000 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 0: Status 3, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 1: Status 0, Change 0 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7701000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:04ce7000 ph data[0]=0:4ce7000 (fff) get Phys(data[n=1]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:04ce8000 ph data[0]=0:4ce7000 (1fff) get Phys(data[n=1]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:04ce9000 ph data[0]=0:4ce7000 (2fff) get Phys(data[n=1]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:04cea000 ph data[0]=0:4ce7000 (3fff) get Phys(data[n=1]=f7705000) AtapiVirtToPhysAddr_: f7705000 -> 00000000:04ceb000 ph data[0]=0:4ce7000 (4fff) get Phys(data[n=1]=f7706000) AtapiVirtToPhysAddr_: f7706000 -> 00000000:04cec000 ph data[0]=0:4ce7000 (5fff) get Phys(data[n=1]=f7707000) AtapiVirtToPhysAddr_: f7707000 -> 00000000:04ced000 ph data[0]=0:4ce7000 (6fff) get Phys(data[n=1]=f7708000) AtapiVirtToPhysAddr_: f7708000 -> 00000000:04cee000 ph data[0]=0:4ce7000 (7fff) get Phys(data[n=1]=f7709000) AtapiVirtToPhysAddr_: f7709000 -> 00000000:04cef000 ph data[0]=0:4ce7000 (8fff) get Phys(data[n=1]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:04cf0000 ph data[0]=0:4ce7000 (9fff) get Phys(data[n=1]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:04cf1000 ph data[0]=0:4ce7000 (afff) get Phys(data[n=1]=f770c000) AtapiVirtToPhysAddr_: f770c000 -> 00000000:04cf2000 ph data[0]=0:4ce7000 (bfff) get Phys(data[n=1]=f770d000) AtapiVirtToPhysAddr_: f770d000 -> 00000000:04cf3000 ph data[0]=0:4ce7000 (cfff) get Phys(data[n=1]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:04cf4000 ph data[0]=0:4ce7000 (dfff) get Phys(data[n=1]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:04cf5000 ph data[0]=0:4ce7000 (efff) get Phys(data[n=1]=f7710000) AtapiVirtToPhysAddr_: f7710000 -> 00000000:04cf6000 set TERM ph data[0]=0:4ce7000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 6d 33 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7711000, count 1000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7711000) AtapiVirtToPhysAddr_: f7711000 -> 00000000:04cf7000 set TERM ph data[0]=0:4cf7000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 6d 53 00 00 02 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f770e000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f770e000) AtapiVirtToPhysAddr_: f770e000 -> 00000000:02d42000 ph data[0]=0:2d42000 (fff) get Phys(data[n=1]=f770f000) AtapiVirtToPhysAddr_: f770f000 -> 00000000:02d43000 set TERM ph data[0]=0:2d42000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 6d 13 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 2: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 3: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 4: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 5: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 6: Status 0, Change 0 (../../lib/drivers/libusb/hub_controller.cpp:326) [USBOHCI] Port 7: Status 0, Change 0 (../../drivers/usb/usbhub/pdo.c:539) USB Tablet (../../drivers/usb/usbhub/pdo.c:539) USB Tablet (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'hidusb' for critical device 'USB#Class_03' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7700000, count e000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:02dca000 ph data[0]=0:2dca000 (fff) get Phys(data[n=1]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02d8b000 ph data[1]=0:2d8b000 (fff) get Phys(data[n=2]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02d8c000 ph data[1]=0:2d8b000 (1fff) get Phys(data[n=2]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:02d8d000 ph data[1]=0:2d8b000 (2fff) get Phys(data[n=2]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:02dce000 ph data[2]=0:2dce000 (fff) get Phys(data[n=3]=f7705000) AtapiVirtToPhysAddr_: f7705000 -> 00000000:02dcf000 ph data[2]=0:2dce000 (1fff) get Phys(data[n=3]=f7706000) AtapiVirtToPhysAddr_: f7706000 -> 00000000:02dd0000 ph data[2]=0:2dce000 (2fff) get Phys(data[n=3]=f7707000) AtapiVirtToPhysAddr_: f7707000 -> 00000000:02dd1000 ph data[2]=0:2dce000 (3fff) get Phys(data[n=3]=f7708000) AtapiVirtToPhysAddr_: f7708000 -> 00000000:02dd2000 ph data[2]=0:2dce000 (4fff) get Phys(data[n=3]=f7709000) AtapiVirtToPhysAddr_: f7709000 -> 00000000:02dd3000 ph data[2]=0:2dce000 (5fff) get Phys(data[n=3]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:02dd4000 ph data[2]=0:2dce000 (6fff) get Phys(data[n=3]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:02dd5000 ph data[2]=0:2dce000 (7fff) get Phys(data[n=3]=f770c000) AtapiVirtToPhysAddr_: f770c000 -> 00000000:02dd6000 ph data[2]=0:2dce000 (8fff) get Phys(data[n=3]=f770d000) AtapiVirtToPhysAddr_: f770d000 -> 00000000:02dd7000 set TERM ph data[2]=0:2dce000 (9fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e e0 00 00 1c 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 7000, WordsLeft 7000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered e000, full size e000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f770a000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f770a000) AtapiVirtToPhysAddr_: f770a000 -> 00000000:02d8a000 ph data[0]=0:2d8a000 (fff) get Phys(data[n=1]=f770b000) AtapiVirtToPhysAddr_: f770b000 -> 00000000:02d4b000 set TERM ph data[1]=0:2d4b000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e e0 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidusb.sys at F7705000 with 9 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f3000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f3000) AtapiVirtToPhysAddr_: f76f3000 -> 00000000:02d95000 ph data[0]=0:2d95000 (fff) get Phys(data[n=1]=f76f4000) AtapiVirtToPhysAddr_: f76f4000 -> 00000000:02d96000 ph data[0]=0:2d95000 (1fff) get Phys(data[n=1]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:02d97000 ph data[0]=0:2d95000 (2fff) get Phys(data[n=1]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:02d98000 ph data[0]=0:2d95000 (3fff) get Phys(data[n=1]=f76f7000) AtapiVirtToPhysAddr_: f76f7000 -> 00000000:02d99000 ph data[0]=0:2d95000 (4fff) get Phys(data[n=1]=f76f8000) AtapiVirtToPhysAddr_: f76f8000 -> 00000000:02d9a000 ph data[0]=0:2d95000 (5fff) get Phys(data[n=1]=f76f9000) AtapiVirtToPhysAddr_: f76f9000 -> 00000000:02ddb000 ph data[1]=0:2ddb000 (fff) get Phys(data[n=2]=f76fa000) AtapiVirtToPhysAddr_: f76fa000 -> 00000000:02ddc000 ph data[1]=0:2ddb000 (1fff) get Phys(data[n=2]=f76fb000) AtapiVirtToPhysAddr_: f76fb000 -> 00000000:02ddd000 ph data[1]=0:2ddb000 (2fff) get Phys(data[n=2]=f76fc000) AtapiVirtToPhysAddr_: f76fc000 -> 00000000:02dde000 ph data[1]=0:2ddb000 (3fff) get Phys(data[n=2]=f76fd000) AtapiVirtToPhysAddr_: f76fd000 -> 00000000:02d9f000 ph data[2]=0:2d9f000 (fff) get Phys(data[n=3]=f76fe000) AtapiVirtToPhysAddr_: f76fe000 -> 00000000:02da0000 ph data[2]=0:2d9f000 (1fff) get Phys(data[n=3]=f76ff000) AtapiVirtToPhysAddr_: f76ff000 -> 00000000:02da1000 ph data[2]=0:2d9f000 (2fff) get Phys(data[n=3]=f7700000) AtapiVirtToPhysAddr_: f7700000 -> 00000000:02da2000 ph data[2]=0:2d9f000 (3fff) get Phys(data[n=3]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02da3000 ph data[2]=0:2d9f000 (4fff) get Phys(data[n=3]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02da4000 set TERM ph data[2]=0:2d9f000 (5fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 94 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7703000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7703000) AtapiVirtToPhysAddr_: f7703000 -> 00000000:02da5000 ph data[0]=0:2da5000 (fff) get Phys(data[n=1]=f7704000) AtapiVirtToPhysAddr_: f7704000 -> 00000000:02da6000 set TERM ph data[0]=0:2da5000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e b4 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f7701000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f7701000) AtapiVirtToPhysAddr_: f7701000 -> 00000000:02d55000 ph data[0]=0:2d55000 (fff) get Phys(data[n=1]=f7702000) AtapiVirtToPhysAddr_: f7702000 -> 00000000:02d56000 set TERM ph data[0]=0:2d55000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e 94 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidclass.sys at F76F9000 with c pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76e5000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76e5000) AtapiVirtToPhysAddr_: f76e5000 -> 00000000:02d64000 ph data[0]=0:2d64000 (fff) get Phys(data[n=1]=f76e6000) AtapiVirtToPhysAddr_: f76e6000 -> 00000000:02d65000 ph data[0]=0:2d64000 (1fff) get Phys(data[n=1]=f76e7000) AtapiVirtToPhysAddr_: f76e7000 -> 00000000:02d66000 ph data[0]=0:2d64000 (2fff) get Phys(data[n=1]=f76e8000) AtapiVirtToPhysAddr_: f76e8000 -> 00000000:02d67000 ph data[0]=0:2d64000 (3fff) get Phys(data[n=1]=f76e9000) AtapiVirtToPhysAddr_: f76e9000 -> 00000000:02d68000 ph data[0]=0:2d64000 (4fff) get Phys(data[n=1]=f76ea000) AtapiVirtToPhysAddr_: f76ea000 -> 00000000:02d69000 ph data[0]=0:2d64000 (5fff) get Phys(data[n=1]=f76eb000) AtapiVirtToPhysAddr_: f76eb000 -> 00000000:02d6a000 ph data[0]=0:2d64000 (6fff) get Phys(data[n=1]=f76ec000) AtapiVirtToPhysAddr_: f76ec000 -> 00000000:02d6b000 ph data[0]=0:2d64000 (7fff) get Phys(data[n=1]=f76ed000) AtapiVirtToPhysAddr_: f76ed000 -> 00000000:02d6c000 ph data[0]=0:2d64000 (8fff) get Phys(data[n=1]=f76ee000) AtapiVirtToPhysAddr_: f76ee000 -> 00000000:02d6d000 ph data[0]=0:2d64000 (9fff) get Phys(data[n=1]=f76ef000) AtapiVirtToPhysAddr_: f76ef000 -> 00000000:02d6e000 ph data[0]=0:2d64000 (afff) get Phys(data[n=1]=f76f0000) AtapiVirtToPhysAddr_: f76f0000 -> 00000000:02d6f000 ph data[0]=0:2d64000 (bfff) get Phys(data[n=1]=f76f1000) AtapiVirtToPhysAddr_: f76f1000 -> 00000000:02d70000 ph data[0]=0:2d64000 (cfff) get Phys(data[n=1]=f76f2000) AtapiVirtToPhysAddr_: f76f2000 -> 00000000:02d71000 ph data[0]=0:2d64000 (dfff) get Phys(data[n=1]=f76f3000) AtapiVirtToPhysAddr_: f76f3000 -> 00000000:02d72000 ph data[0]=0:2d64000 (efff) get Phys(data[n=1]=f76f4000) AtapiVirtToPhysAddr_: f76f4000 -> 00000000:02d73000 set TERM ph data[0]=0:2d64000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e b8 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f5000, count 4000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:02d74000 ph data[0]=0:2d74000 (fff) get Phys(data[n=1]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:02d75000 ph data[0]=0:2d74000 (1fff) get Phys(data[n=1]=f76f7000) AtapiVirtToPhysAddr_: f76f7000 -> 00000000:02d76000 ph data[0]=0:2d74000 (2fff) get Phys(data[n=1]=f76f8000) AtapiVirtToPhysAddr_: f76f8000 -> 00000000:02d77000 set TERM ph data[0]=0:2d74000 (3fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e d8 00 00 08 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 2000, WordsLeft 2000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 4000, full size 4000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76f5000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76f5000) AtapiVirtToPhysAddr_: f76f5000 -> 00000000:02d24000 ph data[0]=0:2d24000 (fff) get Phys(data[n=1]=f76f6000) AtapiVirtToPhysAddr_: f76f6000 -> 00000000:02d25000 set TERM ph data[0]=0:2d24000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9e b8 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\hidparse.sys at F76ED000 with c pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpinit.c:319) IopOpenRegistryKeyEx() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../ntoskrnl/io/iomgr/driver.c:715) ZwOpenKey() failed with Status C0000034 (../../drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0xd WARNING: USBHUB_PdoStartDevice at ../../drivers/usb/usbhub/pdo.c:414 is UNIMPLEMENTED! (../../lib/rtl/actctx.c:4606) 0031FB10 00000088 (../../lib/rtl/actctx.c:2725) looking for manifest associated with (null) id 1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683e58, CDB 0xb2683e88, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2683e58 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2683e88) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683e88 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683e58 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683e58, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683e58 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../drivers/usb/usbohci/usb_queue.cpp:667) URB failed with status 0xc0000004 (../../drivers/usb/usbohci/usb_request.cpp:1831) OHCI_TD_CONDITION_STALL detected in TransferDescriptor TransferDescriptor F77D03E0 (../../lib/drivers/libusb/hub_controller.cpp:2182) [USBOHCI] URB_FUNCTION_CLASS_INTERFACE failed with Urb Status 0 (../../drivers/hid/hidusb/hidusb.c:1416) Status c0000001 (../../drivers/usb/usbhub/pdo.c:287) IOCTL_INTERNAL_USB_SUBMIT_URB Function 28 NOT IMPLEMENTED WARNING: RtlCreateTagHeap at ../../lib/rtl/heap.c:3855 is UNIMPLEMENTED! (../../base/system/smss/sminit.c:2243) SMSS: !!! MiniNT Boot !!! (../../base/system/smss/sminit.c:240) SmpProtectionMode: 1 (../../base/system/smss/sminit.c:265) SmpAllowProtectedRenames: 0 (../../base/system/smss/sminit.c:311) Creating: \Windows directory (../../base/system/smss/sminit.c:311) Creating: \RPC Control directory (../../base/system/smss/sminit.c:311) Creating: \RPC Control directory AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=0 cntrlr 0x0 chan 0x0 (../../drivers/usb/usbhub/pdo.c:745) PDO IRP_MJ_PNP / unknown minor function 0x14 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:4034) IRP_MN_QUERY_PNP_DEVICE_STATE failed with status 0xc00000bb (../../ntoskrnl/io/pnpmgr/pnpmgr.c:388) Installed service 'mouhid' for critical device 'HID_DEVICE_SYSTEM_MOUSE' TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d9000, count c000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d9000) AtapiVirtToPhysAddr_: f76d9000 -> 00000000:02c0b000 ph data[0]=0:2c0b000 (fff) get Phys(data[n=1]=f76da000) AtapiVirtToPhysAddr_: f76da000 -> 00000000:02c0c000 ph data[0]=0:2c0b000 (1fff) get Phys(data[n=1]=f76db000) AtapiVirtToPhysAddr_: f76db000 -> 00000000:02c0d000 ph data[0]=0:2c0b000 (2fff) get Phys(data[n=1]=f76dc000) AtapiVirtToPhysAddr_: f76dc000 -> 00000000:02c4e000 ph data[1]=0:2c4e000 (fff) get Phys(data[n=2]=f76dd000) AtapiVirtToPhysAddr_: f76dd000 -> 00000000:02c4f000 ph data[1]=0:2c4e000 (1fff) get Phys(data[n=2]=f76de000) AtapiVirtToPhysAddr_: f76de000 -> 00000000:02c90000 ph data[2]=0:2c90000 (fff) get Phys(data[n=3]=f76df000) AtapiVirtToPhysAddr_: f76df000 -> 00000000:02c91000 ph data[2]=0:2c90000 (1fff) get Phys(data[n=3]=f76e0000) AtapiVirtToPhysAddr_: f76e0000 -> 00000000:02c92000 ph data[2]=0:2c90000 (2fff) get Phys(data[n=3]=f76e1000) AtapiVirtToPhysAddr_: f76e1000 -> 00000000:02c93000 ph data[2]=0:2c90000 (3fff) get Phys(data[n=3]=f76e2000) AtapiVirtToPhysAddr_: f76e2000 -> 00000000:02c94000 ph data[2]=0:2c90000 (4fff) get Phys(data[n=3]=f76e3000) AtapiVirtToPhysAddr_: f76e3000 -> 00000000:02c95000 ph data[2]=0:2c90000 (5fff) get Phys(data[n=3]=f76e4000) AtapiVirtToPhysAddr_: f76e4000 -> 00000000:02c96000 set TERM ph data[2]=0:2c90000 (6fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 68 00 00 18 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 6000, WordsLeft 6000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered c000, full size c000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76e1000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76e1000) AtapiVirtToPhysAddr_: f76e1000 -> 00000000:02bcb000 ph data[0]=0:2bcb000 (fff) get Phys(data[n=1]=f76e2000) AtapiVirtToPhysAddr_: f76e2000 -> 00000000:02bcc000 set TERM ph data[0]=0:2bcb000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 a3 68 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\mouhid.sys at F76DD000 with 8 pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../drivers/hid/hidclass/hidclass.c:161) [HIDCLASS] PnP HACK (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: mouhid (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: hidusb (../../base/system/smss/sminit.c:470) KnownDll Path: E:\reactos\system32 (../../base/system/smss/sminit.c:495) Setting ComSpec = E:\reactos\system32\cmd.exe (../../base/system/smss/sminit.c:495) Setting Path = E:\reactos\bin;E:\reactos\System32;E:\reactos;E:\reactos\System32\Wbem (../../base/system/smss/sminit.c:495) Setting PATHEXT = .COM;.EXE;.BAT;.CMD (../../base/system/smss/sminit.c:495) Setting PROMPT = $P$G$I (../../base/system/smss/sminit.c:495) Setting TEMP = E:\reactos\TEMP (../../base/system/smss/sminit.c:495) Setting TMP = E:\reactos\TEMP (../../base/system/smss/sminit.c:495) Setting windir = E:\reactos (../../base/system/smss/sminit.c:495) Setting DEBUGCHANNEL = +msgina,+UserDisplay,+newdev (../../base/system/smss/sminit.c:495) Setting USERPROFILE = E:\Profiles\Default User (../../base/system/smss/sminit.c:495) Setting ALLUSERSPROFILE = E:\Profiles\All Users (../../base/system/smss/sminit.c:543) Subsystem entry: Debug- (../../base/system/smss/sminit.c:543) Subsystem entry: Kmode-E:\reactos\system32\win32k.sys (../../base/system/smss/sminit.c:543) Subsystem entry: Posix-E:\reactos\system32\psxss.exe (../../base/system/smss/sminit.c:543) Subsystem entry: Windows-E:\reactos\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,12288,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16 (../../base/system/smss/sminit.c:560) Found subsystem: Debug (../../base/system/smss/sminit.c:576) Required (../../base/system/smss/sminit.c:560) Found subsystem: Windows (../../base/system/smss/sminit.c:576) Required (../../base/system/smss/sminit.c:560) Found subsystem: Posix (../../base/system/smss/sminit.c:582) Optional (../../base/system/smss/sminit.c:543) Subsystem entry: Kmode-E:\reactos\system32\win32k.sys (../../base/system/smss/sminit.c:1294) Creating symlink for AUX to \DosDevices\COM1 (../../base/system/smss/sminit.c:1294) Creating symlink for MAILSLOT to \Device\MailSlot (../../base/system/smss/sminit.c:1294) Creating symlink for NUL to \Device\Null (../../base/system/smss/sminit.c:1294) Creating symlink for PIPE to \Device\NamedPipe (../../base/system/smss/sminit.c:1294) Creating symlink for PRN to \DosDevices\LPT1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb24535d0, CDB 0xb2453600, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb24535d0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453600) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f768e000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f768e000) AtapiVirtToPhysAddr_: f768e000 -> 00000000:02c9b000 ph data[0]=0:2c9b000 (fff) get Phys(data[n=1]=f768f000) AtapiVirtToPhysAddr_: f768f000 -> 00000000:02c9c000 ph data[0]=0:2c9b000 (1fff) get Phys(data[n=1]=f7690000) AtapiVirtToPhysAddr_: f7690000 -> 00000000:02c9d000 ph data[0]=0:2c9b000 (2fff) get Phys(data[n=1]=f7691000) AtapiVirtToPhysAddr_: f7691000 -> 00000000:02c9e000 ph data[0]=0:2c9b000 (3fff) get Phys(data[n=1]=f7692000) AtapiVirtToPhysAddr_: f7692000 -> 00000000:02c5f000 ph data[1]=0:2c5f000 (fff) get Phys(data[n=2]=f7693000) AtapiVirtToPhysAddr_: f7693000 -> 00000000:02c60000 ph data[1]=0:2c5f000 (1fff) get Phys(data[n=2]=f7694000) AtapiVirtToPhysAddr_: f7694000 -> 00000000:02c61000 ph data[1]=0:2c5f000 (2fff) get Phys(data[n=2]=f7695000) AtapiVirtToPhysAddr_: f7695000 -> 00000000:02c62000 ph data[1]=0:2c5f000 (3fff) get Phys(data[n=2]=f7696000) AtapiVirtToPhysAddr_: f7696000 -> 00000000:02c63000 ph data[1]=0:2c5f000 (4fff) get Phys(data[n=2]=f7697000) AtapiVirtToPhysAddr_: f7697000 -> 00000000:02c64000 ph data[1]=0:2c5f000 (5fff) get Phys(data[n=2]=f7698000) AtapiVirtToPhysAddr_: f7698000 -> 00000000:02c65000 ph data[1]=0:2c5f000 (6fff) get Phys(data[n=2]=f7699000) AtapiVirtToPhysAddr_: f7699000 -> 00000000:02c66000 ph data[1]=0:2c5f000 (7fff) get Phys(data[n=2]=f769a000) AtapiVirtToPhysAddr_: f769a000 -> 00000000:02c67000 ph data[1]=0:2c5f000 (8fff) get Phys(data[n=2]=f769b000) AtapiVirtToPhysAddr_: f769b000 -> 00000000:02c68000 ph data[1]=0:2c5f000 (9fff) get Phys(data[n=2]=f769c000) AtapiVirtToPhysAddr_: f769c000 -> 00000000:02c69000 ph data[1]=0:2c5f000 (afff) get Phys(data[n=2]=f769d000) AtapiVirtToPhysAddr_: f769d000 -> 00000000:02c6a000 set TERM ph data[1]=0:2c5f000 (bfff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453600 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 10 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b24535d0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb24535d0, status 1 AtapiInterrupt: RequestComplete, srb 0xb24535d0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f769e000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f769e000) AtapiVirtToPhysAddr_: f769e000 -> 00000000:02c6b000 ph data[0]=0:2c6b000 (fff) get Phys(data[n=1]=f769f000) AtapiVirtToPhysAddr_: f769f000 -> 00000000:02c6c000 ph data[0]=0:2c6b000 (1fff) get Phys(data[n=1]=f76a0000) AtapiVirtToPhysAddr_: f76a0000 -> 00000000:02c6d000 ph data[0]=0:2c6b000 (2fff) get Phys(data[n=1]=f76a1000) AtapiVirtToPhysAddr_: f76a1000 -> 00000000:02c6e000 ph data[0]=0:2c6b000 (3fff) get Phys(data[n=1]=f76a2000) AtapiVirtToPhysAddr_: f76a2000 -> 00000000:02c6f000 ph data[0]=0:2c6b000 (4fff) get Phys(data[n=1]=f76a3000) AtapiVirtToPhysAddr_: f76a3000 -> 00000000:02c70000 ph data[0]=0:2c6b000 (5fff) get Phys(data[n=1]=f76a4000) AtapiVirtToPhysAddr_: f76a4000 -> 00000000:02c71000 ph data[0]=0:2c6b000 (6fff) get Phys(data[n=1]=f76a5000) AtapiVirtToPhysAddr_: f76a5000 -> 00000000:02c72000 ph data[0]=0:2c6b000 (7fff) get Phys(data[n=1]=f76a6000) AtapiVirtToPhysAddr_: f76a6000 -> 00000000:02c73000 ph data[0]=0:2c6b000 (8fff) get Phys(data[n=1]=f76a7000) AtapiVirtToPhysAddr_: f76a7000 -> 00000000:02c74000 ph data[0]=0:2c6b000 (9fff) get Phys(data[n=1]=f76a8000) AtapiVirtToPhysAddr_: f76a8000 -> 00000000:02c75000 ph data[0]=0:2c6b000 (afff) get Phys(data[n=1]=f76a9000) AtapiVirtToPhysAddr_: f76a9000 -> 00000000:02c76000 ph data[0]=0:2c6b000 (bfff) get Phys(data[n=1]=f76aa000) AtapiVirtToPhysAddr_: f76aa000 -> 00000000:02c77000 ph data[0]=0:2c6b000 (cfff) get Phys(data[n=1]=f76ab000) AtapiVirtToPhysAddr_: f76ab000 -> 00000000:02c78000 ph data[0]=0:2c6b000 (dfff) get Phys(data[n=1]=f76ac000) AtapiVirtToPhysAddr_: f76ac000 -> 00000000:02c79000 ph data[0]=0:2c6b000 (efff) get Phys(data[n=1]=f76ad000) AtapiVirtToPhysAddr_: f76ad000 -> 00000000:02c7a000 set TERM ph data[0]=0:2c6b000 (ffff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 10 20 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76ae000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76ae000) AtapiVirtToPhysAddr_: f76ae000 -> 00000000:02c3b000 ph data[0]=0:2c3b000 (fff) get Phys(data[n=1]=f76af000) AtapiVirtToPhysAddr_: f76af000 -> 00000000:02c3c000 ph data[0]=0:2c3b000 (1fff) get Phys(data[n=1]=f76b0000) AtapiVirtToPhysAddr_: f76b0000 -> 00000000:02c3d000 ph data[0]=0:2c3b000 (2fff) get Phys(data[n=1]=f76b1000) AtapiVirtToPhysAddr_: f76b1000 -> 00000000:02c3e000 ph data[0]=0:2c3b000 (3fff) get Phys(data[n=1]=f76b2000) AtapiVirtToPhysAddr_: f76b2000 -> 00000000:02bff000 ph data[1]=0:2bff000 (fff) get Phys(data[n=2]=f76b3000) AtapiVirtToPhysAddr_: f76b3000 -> 00000000:02b00000 ph data[2]=0:2b00000 (fff) get Phys(data[n=3]=f76b4000) AtapiVirtToPhysAddr_: f76b4000 -> 00000000:02b41000 ph data[3]=0:2b41000 (fff) get Phys(data[n=4]=f76b5000) AtapiVirtToPhysAddr_: f76b5000 -> 00000000:02b42000 ph data[3]=0:2b41000 (1fff) get Phys(data[n=4]=f76b6000) AtapiVirtToPhysAddr_: f76b6000 -> 00000000:02b43000 ph data[3]=0:2b41000 (2fff) get Phys(data[n=4]=f76b7000) AtapiVirtToPhysAddr_: f76b7000 -> 00000000:02b44000 ph data[3]=0:2b41000 (3fff) get Phys(data[n=4]=f76b8000) AtapiVirtToPhysAddr_: f76b8000 -> 00000000:02b45000 ph data[3]=0:2b41000 (4fff) get Phys(data[n=4]=f76b9000) AtapiVirtToPhysAddr_: f76b9000 -> 00000000:02b86000 ph data[4]=0:2b86000 (fff) get Phys(data[n=5]=f76ba000) AtapiVirtToPhysAddr_: f76ba000 -> 00000000:02b87000 ph data[4]=0:2b86000 (1fff) get Phys(data[n=5]=f76bb000) AtapiVirtToPhysAddr_: f76bb000 -> 00000000:02bc8000 ph data[5]=0:2bc8000 (fff) get Phys(data[n=6]=f76bc000) AtapiVirtToPhysAddr_: f76bc000 -> 00000000:02bc9000 ph data[5]=0:2bc8000 (1fff) get Phys(data[n=6]=f76bd000) AtapiVirtToPhysAddr_: f76bd000 -> 00000000:02bca000 set TERM ph data[5]=0:2bc8000 (2fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x6, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 10 40 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76be000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76be000) AtapiVirtToPhysAddr_: f76be000 -> 00000000:02b8b000 ph data[0]=0:2b8b000 (fff) get Phys(data[n=1]=f76bf000) AtapiVirtToPhysAddr_: f76bf000 -> 00000000:02b8c000 ph data[0]=0:2b8b000 (1fff) get Phys(data[n=1]=f76c0000) AtapiVirtToPhysAddr_: f76c0000 -> 00000000:02b8d000 ph data[0]=0:2b8b000 (2fff) get Phys(data[n=1]=f76c1000) AtapiVirtToPhysAddr_: f76c1000 -> 00000000:02bce000 ph data[1]=0:2bce000 (fff) get Phys(data[n=2]=f76c2000) AtapiVirtToPhysAddr_: f76c2000 -> 00000000:02bcf000 ph data[1]=0:2bce000 (1fff) get Phys(data[n=2]=f76c3000) AtapiVirtToPhysAddr_: f76c3000 -> 00000000:02bd0000 ph data[1]=0:2bce000 (2fff) get Phys(data[n=2]=f76c4000) AtapiVirtToPhysAddr_: f76c4000 -> 00000000:02c11000 ph data[2]=0:2c11000 (fff) get Phys(data[n=3]=f76c5000) AtapiVirtToPhysAddr_: f76c5000 -> 00000000:02c12000 ph data[2]=0:2c11000 (1fff) get Phys(data[n=3]=f76c6000) AtapiVirtToPhysAddr_: f76c6000 -> 00000000:02c13000 ph data[2]=0:2c11000 (2fff) get Phys(data[n=3]=f76c7000) AtapiVirtToPhysAddr_: f76c7000 -> 00000000:02c14000 ph data[2]=0:2c11000 (3fff) get Phys(data[n=3]=f76c8000) AtapiVirtToPhysAddr_: f76c8000 -> 00000000:02c15000 ph data[2]=0:2c11000 (4fff) get Phys(data[n=3]=f76c9000) AtapiVirtToPhysAddr_: f76c9000 -> 00000000:02c16000 ph data[2]=0:2c11000 (5fff) get Phys(data[n=3]=f76ca000) AtapiVirtToPhysAddr_: f76ca000 -> 00000000:02c17000 ph data[2]=0:2c11000 (6fff) get Phys(data[n=3]=f76cb000) AtapiVirtToPhysAddr_: f76cb000 -> 00000000:02c18000 ph data[2]=0:2c11000 (7fff) get Phys(data[n=3]=f76cc000) AtapiVirtToPhysAddr_: f76cc000 -> 00000000:02c19000 ph data[2]=0:2c11000 (8fff) get Phys(data[n=3]=f76cd000) AtapiVirtToPhysAddr_: f76cd000 -> 00000000:02c1a000 set TERM ph data[2]=0:2c11000 (9fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 10 60 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d9000, count 3800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d9000) AtapiVirtToPhysAddr_: f76d9000 -> 00000000:02c5d000 ph data[0]=0:2c5d000 (fff) get Phys(data[n=1]=f76da000) AtapiVirtToPhysAddr_: f76da000 -> 00000000:02c5e000 ph data[0]=0:2c5d000 (1fff) get Phys(data[n=1]=f76db000) AtapiVirtToPhysAddr_: f76db000 -> 00000000:02c1f000 ph data[1]=0:2c1f000 (fff) get Phys(data[n=2]=f76dc000) AtapiVirtToPhysAddr_: f76dc000 -> 00000000:02c20000 set TERM ph data[1]=0:2c1f000 (17ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 95 5a 00 00 07 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1c00, WordsLeft 1c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 3800, full size 3800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d9000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d9000) AtapiVirtToPhysAddr_: f76d9000 -> 00000000:02c1d000 ph data[0]=0:2c1d000 (fff) get Phys(data[n=1]=f76da000) AtapiVirtToPhysAddr_: f76da000 -> 00000000:02c1e000 set TERM ph data[0]=0:2c1d000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 00 95 5a 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../lib/rtl/actctx.c:4606) 0022FB10 00000088 (../../lib/rtl/actctx.c:2725) looking for manifest associated with (null) id 1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b2452c20) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2452c20 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc65c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8000) AtapiVirtToPhysAddr_: f76d8000 -> 00000000:04cd7000 set TERM ph data[0]=0:4cd7000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc63c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8000) AtapiVirtToPhysAddr_: f76d8000 -> 00000000:04cd7000 set TERM ph data[0]=0:4cd7000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc65c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8000, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8000) AtapiVirtToPhysAddr_: f76d8000 -> 00000000:04cd7000 set TERM ph data[0]=0:4cd7000 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb23d9760, CDB 0xb23d9790, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb23d9760 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23d9790) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b23d9790 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b23d9760 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23d9760, status 1 AtapiInterrupt: RequestComplete, srb 0xb23d9760 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb26839e8, CDB 0xb2683a18, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb26839e8 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683a18) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f769e000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f769e000) AtapiVirtToPhysAddr_: f769e000 -> 00000000:02bb1000 ph data[0]=0:2bb1000 (fff) get Phys(data[n=1]=f769f000) AtapiVirtToPhysAddr_: f769f000 -> 00000000:02bb2000 ph data[0]=0:2bb1000 (1fff) get Phys(data[n=1]=f76a0000) AtapiVirtToPhysAddr_: f76a0000 -> 00000000:02bb3000 ph data[0]=0:2bb1000 (2fff) get Phys(data[n=1]=f76a1000) AtapiVirtToPhysAddr_: f76a1000 -> 00000000:02bf4000 ph data[1]=0:2bf4000 (fff) get Phys(data[n=2]=f76a2000) AtapiVirtToPhysAddr_: f76a2000 -> 00000000:02bf5000 ph data[1]=0:2bf4000 (1fff) get Phys(data[n=2]=f76a3000) AtapiVirtToPhysAddr_: f76a3000 -> 00000000:02bf6000 ph data[1]=0:2bf4000 (2fff) get Phys(data[n=2]=f76a4000) AtapiVirtToPhysAddr_: f76a4000 -> 00000000:02bf7000 ph data[1]=0:2bf4000 (3fff) get Phys(data[n=2]=f76a5000) AtapiVirtToPhysAddr_: f76a5000 -> 00000000:02bf8000 ph data[1]=0:2bf4000 (4fff) get Phys(data[n=2]=f76a6000) AtapiVirtToPhysAddr_: f76a6000 -> 00000000:02bf9000 ph data[1]=0:2bf4000 (5fff) get Phys(data[n=2]=f76a7000) AtapiVirtToPhysAddr_: f76a7000 -> 00000000:02bfa000 ph data[1]=0:2bf4000 (6fff) get Phys(data[n=2]=f76a8000) AtapiVirtToPhysAddr_: f76a8000 -> 00000000:02bbb000 ph data[2]=0:2bbb000 (fff) get Phys(data[n=3]=f76a9000) AtapiVirtToPhysAddr_: f76a9000 -> 00000000:02bbc000 ph data[2]=0:2bbb000 (1fff) get Phys(data[n=3]=f76aa000) AtapiVirtToPhysAddr_: f76aa000 -> 00000000:02bbd000 ph data[2]=0:2bbb000 (2fff) get Phys(data[n=3]=f76ab000) AtapiVirtToPhysAddr_: f76ab000 -> 00000000:02bbe000 ph data[2]=0:2bbb000 (3fff) get Phys(data[n=3]=f76ac000) AtapiVirtToPhysAddr_: f76ac000 -> 00000000:02b7f000 ph data[3]=0:2b7f000 (fff) get Phys(data[n=4]=f76ad000) AtapiVirtToPhysAddr_: f76ad000 -> 00000000:02a80000 set TERM ph data[4]=0:2a80000 (fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683a18 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x5, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9d 7c 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b26839e8 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb26839e8, status 1 AtapiInterrupt: RequestComplete, srb 0xb26839e8 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2683808, CDB 0xb2683838, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2683808 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2683838) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76ae000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76ae000) AtapiVirtToPhysAddr_: f76ae000 -> 00000000:02ac1000 ph data[0]=0:2ac1000 (fff) get Phys(data[n=1]=f76af000) AtapiVirtToPhysAddr_: f76af000 -> 00000000:02ac2000 ph data[0]=0:2ac1000 (1fff) get Phys(data[n=1]=f76b0000) AtapiVirtToPhysAddr_: f76b0000 -> 00000000:02ac3000 ph data[0]=0:2ac1000 (2fff) get Phys(data[n=1]=f76b1000) AtapiVirtToPhysAddr_: f76b1000 -> 00000000:02ac4000 ph data[0]=0:2ac1000 (3fff) get Phys(data[n=1]=f76b2000) AtapiVirtToPhysAddr_: f76b2000 -> 00000000:02ac5000 ph data[0]=0:2ac1000 (4fff) get Phys(data[n=1]=f76b3000) AtapiVirtToPhysAddr_: f76b3000 -> 00000000:02b06000 ph data[1]=0:2b06000 (fff) get Phys(data[n=2]=f76b4000) AtapiVirtToPhysAddr_: f76b4000 -> 00000000:02b07000 ph data[1]=0:2b06000 (1fff) get Phys(data[n=2]=f76b5000) AtapiVirtToPhysAddr_: f76b5000 -> 00000000:02b48000 ph data[2]=0:2b48000 (fff) get Phys(data[n=3]=f76b6000) AtapiVirtToPhysAddr_: f76b6000 -> 00000000:02b49000 ph data[2]=0:2b48000 (1fff) get Phys(data[n=3]=f76b7000) AtapiVirtToPhysAddr_: f76b7000 -> 00000000:02b4a000 ph data[2]=0:2b48000 (2fff) get Phys(data[n=3]=f76b8000) AtapiVirtToPhysAddr_: f76b8000 -> 00000000:02b0b000 ph data[3]=0:2b0b000 (fff) get Phys(data[n=4]=f76b9000) AtapiVirtToPhysAddr_: f76b9000 -> 00000000:02b0c000 ph data[3]=0:2b0b000 (1fff) get Phys(data[n=4]=f76ba000) AtapiVirtToPhysAddr_: f76ba000 -> 00000000:02b0d000 ph data[3]=0:2b0b000 (2fff) get Phys(data[n=4]=f76bb000) AtapiVirtToPhysAddr_: f76bb000 -> 00000000:02b4e000 ph data[4]=0:2b4e000 (fff) get Phys(data[n=5]=f76bc000) AtapiVirtToPhysAddr_: f76bc000 -> 00000000:02b4f000 ph data[4]=0:2b4e000 (1fff) get Phys(data[n=5]=f76bd000) AtapiVirtToPhysAddr_: f76bd000 -> 00000000:02b50000 set TERM ph data[4]=0:2b4e000 (2fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2683838 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x5, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9d 9c 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2683808 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2683808, status 1 AtapiInterrupt: RequestComplete, srb 0xb2683808 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76be000, count 10000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76be000) AtapiVirtToPhysAddr_: f76be000 -> 00000000:02b91000 ph data[0]=0:2b91000 (fff) get Phys(data[n=1]=f76bf000) AtapiVirtToPhysAddr_: f76bf000 -> 00000000:02b92000 ph data[0]=0:2b91000 (1fff) get Phys(data[n=1]=f76c0000) AtapiVirtToPhysAddr_: f76c0000 -> 00000000:02b93000 ph data[0]=0:2b91000 (2fff) get Phys(data[n=1]=f76c1000) AtapiVirtToPhysAddr_: f76c1000 -> 00000000:02b94000 ph data[0]=0:2b91000 (3fff) get Phys(data[n=1]=f76c2000) AtapiVirtToPhysAddr_: f76c2000 -> 00000000:02b95000 ph data[0]=0:2b91000 (4fff) get Phys(data[n=1]=f76c3000) AtapiVirtToPhysAddr_: f76c3000 -> 00000000:02b96000 ph data[0]=0:2b91000 (5fff) get Phys(data[n=1]=f76c4000) AtapiVirtToPhysAddr_: f76c4000 -> 00000000:02b97000 ph data[0]=0:2b91000 (6fff) get Phys(data[n=1]=f76c5000) AtapiVirtToPhysAddr_: f76c5000 -> 00000000:02b98000 ph data[0]=0:2b91000 (7fff) get Phys(data[n=1]=f76c6000) AtapiVirtToPhysAddr_: f76c6000 -> 00000000:02b99000 ph data[0]=0:2b91000 (8fff) get Phys(data[n=1]=f76c7000) AtapiVirtToPhysAddr_: f76c7000 -> 00000000:02b9a000 ph data[0]=0:2b91000 (9fff) get Phys(data[n=1]=f76c8000) AtapiVirtToPhysAddr_: f76c8000 -> 00000000:02bdb000 ph data[1]=0:2bdb000 (fff) get Phys(data[n=2]=f76c9000) AtapiVirtToPhysAddr_: f76c9000 -> 00000000:02bdc000 ph data[1]=0:2bdb000 (1fff) get Phys(data[n=2]=f76ca000) AtapiVirtToPhysAddr_: f76ca000 -> 00000000:02bdd000 ph data[1]=0:2bdb000 (2fff) get Phys(data[n=2]=f76cb000) AtapiVirtToPhysAddr_: f76cb000 -> 00000000:02bde000 ph data[1]=0:2bdb000 (3fff) get Phys(data[n=2]=f76cc000) AtapiVirtToPhysAddr_: f76cc000 -> 00000000:02b9f000 ph data[2]=0:2b9f000 (fff) get Phys(data[n=3]=f76cd000) AtapiVirtToPhysAddr_: f76cd000 -> 00000000:02ba0000 set TERM ph data[2]=0:2b9f000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9d bc 00 00 20 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/ex/init.c:2001) Free non-cache pages: 3c6b1 (../../ntoskrnl/mm/ARM3/zeropage.c:50) Free non-cache pages: 3c8f3 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d5000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d5000) AtapiVirtToPhysAddr_: f76d5000 -> 00000000:02b71000 ph data[0]=0:2b71000 (fff) get Phys(data[n=1]=f76d6000) AtapiVirtToPhysAddr_: f76d6000 -> 00000000:02b72000 set TERM ph data[0]=0:2b71000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 9d 7c 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/mm/ARM3/sysldr.c:176) Loading: \SystemRoot\system32\drivers\fastfat.sys at F76B4000 with 1a pages TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb23d9760, CDB 0xb23d9790, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb23d9760 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23d9790) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b23d9790 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b23d9760 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23d9760, status 1 AtapiInterrupt: RequestComplete, srb 0xb23d9760 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 (../../ntoskrnl/io/pnpmgr/pnpmgr.c:812) ServiceName: fastfat TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc45c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8400, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8400) AtapiVirtToPhysAddr_: f76d8400 -> 00000000:04cd7400 set TERM ph data[0]=0:4cd7400 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc45c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8400, count 200, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8400) AtapiVirtToPhysAddr_: f76d8400 -> 00000000:04cd7400 set TERM ph data[0]=0:4cd7400 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc1dc ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5f, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 5f, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 83280000, count 10000, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=83280000) AtapiVirtToPhysAddr_: 83280000 -> 00000000:02b0f000 ph data[0]=0:2b0f000 (fff) get Phys(data[n=1]=83281000) AtapiVirtToPhysAddr_: 83281000 -> 00000000:02b10000 ph data[0]=0:2b0f000 (1fff) get Phys(data[n=1]=83282000) AtapiVirtToPhysAddr_: 83282000 -> 00000000:02b51000 ph data[1]=0:2b51000 (fff) get Phys(data[n=2]=83283000) AtapiVirtToPhysAddr_: 83283000 -> 00000000:02b52000 ph data[1]=0:2b51000 (1fff) get Phys(data[n=2]=83284000) AtapiVirtToPhysAddr_: 83284000 -> 00000000:02b53000 ph data[1]=0:2b51000 (2fff) get Phys(data[n=2]=83285000) AtapiVirtToPhysAddr_: 83285000 -> 00000000:02b54000 ph data[1]=0:2b51000 (3fff) get Phys(data[n=2]=83286000) AtapiVirtToPhysAddr_: 83286000 -> 00000000:02b55000 ph data[1]=0:2b51000 (4fff) get Phys(data[n=2]=83287000) AtapiVirtToPhysAddr_: 83287000 -> 00000000:02b56000 ph data[1]=0:2b51000 (5fff) get Phys(data[n=2]=83288000) AtapiVirtToPhysAddr_: 83288000 -> 00000000:02b57000 ph data[1]=0:2b51000 (6fff) get Phys(data[n=2]=83289000) AtapiVirtToPhysAddr_: 83289000 -> 00000000:02b58000 ph data[1]=0:2b51000 (7fff) get Phys(data[n=2]=8328a000) AtapiVirtToPhysAddr_: 8328a000 -> 00000000:02b59000 ph data[1]=0:2b51000 (8fff) get Phys(data[n=2]=8328b000) AtapiVirtToPhysAddr_: 8328b000 -> 00000000:02b5a000 ph data[1]=0:2b51000 (9fff) get Phys(data[n=2]=8328c000) AtapiVirtToPhysAddr_: 8328c000 -> 00000000:02b9b000 ph data[2]=0:2b9b000 (fff) get Phys(data[n=3]=8328d000) AtapiVirtToPhysAddr_: 8328d000 -> 00000000:02b9c000 ph data[2]=0:2b9b000 (1fff) get Phys(data[n=3]=8328e000) AtapiVirtToPhysAddr_: 8328e000 -> 00000000:02b9d000 ph data[2]=0:2b9b000 (2fff) get Phys(data[n=3]=8328f000) AtapiVirtToPhysAddr_: 8328f000 -> 00000000:02b9e000 set TERM ph data[2]=0:2b9b000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 5f 00 00 e0 00 00 00 00 80 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5f, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc1dc ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector df, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is df, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 83290000, count 10000, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=83290000) AtapiVirtToPhysAddr_: 83290000 -> 00000000:02b5f000 ph data[0]=0:2b5f000 (fff) get Phys(data[n=1]=83291000) AtapiVirtToPhysAddr_: 83291000 -> 00000000:02b60000 ph data[0]=0:2b5f000 (1fff) get Phys(data[n=1]=83292000) AtapiVirtToPhysAddr_: 83292000 -> 00000000:02b61000 ph data[0]=0:2b5f000 (2fff) get Phys(data[n=1]=83293000) AtapiVirtToPhysAddr_: 83293000 -> 00000000:02b62000 ph data[0]=0:2b5f000 (3fff) get Phys(data[n=1]=83294000) AtapiVirtToPhysAddr_: 83294000 -> 00000000:02b63000 ph data[0]=0:2b5f000 (4fff) get Phys(data[n=1]=83295000) AtapiVirtToPhysAddr_: 83295000 -> 00000000:02b64000 ph data[0]=0:2b5f000 (5fff) get Phys(data[n=1]=83296000) AtapiVirtToPhysAddr_: 83296000 -> 00000000:02b65000 ph data[0]=0:2b5f000 (6fff) get Phys(data[n=1]=83297000) AtapiVirtToPhysAddr_: 83297000 -> 00000000:02b26000 ph data[1]=0:2b26000 (fff) get Phys(data[n=2]=83298000) AtapiVirtToPhysAddr_: 83298000 -> 00000000:02b27000 ph data[1]=0:2b26000 (1fff) get Phys(data[n=2]=83299000) AtapiVirtToPhysAddr_: 83299000 -> 00000000:02b28000 ph data[1]=0:2b26000 (2fff) get Phys(data[n=2]=8329a000) AtapiVirtToPhysAddr_: 8329a000 -> 00000000:02b29000 ph data[1]=0:2b26000 (3fff) get Phys(data[n=2]=8329b000) AtapiVirtToPhysAddr_: 8329b000 -> 00000000:02b2a000 ph data[1]=0:2b26000 (4fff) get Phys(data[n=2]=8329c000) AtapiVirtToPhysAddr_: 8329c000 -> 00000000:02b2b000 ph data[1]=0:2b26000 (5fff) get Phys(data[n=2]=8329d000) AtapiVirtToPhysAddr_: 8329d000 -> 00000000:02b2c000 ph data[1]=0:2b26000 (6fff) get Phys(data[n=2]=8329e000) AtapiVirtToPhysAddr_: 8329e000 -> 00000000:02b2d000 ph data[1]=0:2b26000 (7fff) get Phys(data[n=2]=8329f000) AtapiVirtToPhysAddr_: 8329f000 -> 00000000:02b2e000 set TERM ph data[1]=0:2b26000 (8fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 df 00 00 e0 00 00 00 00 80 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0xdf, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x2, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc1dc ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 15f, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 15f, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 832a0000, count 10000, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=832a0000) AtapiVirtToPhysAddr_: 832a0000 -> 00000000:02b2f000 ph data[0]=0:2b2f000 (fff) get Phys(data[n=1]=832a1000) AtapiVirtToPhysAddr_: 832a1000 -> 00000000:02b30000 ph data[0]=0:2b2f000 (1fff) get Phys(data[n=1]=832a2000) AtapiVirtToPhysAddr_: 832a2000 -> 00000000:02b31000 ph data[0]=0:2b2f000 (2fff) get Phys(data[n=1]=832a3000) AtapiVirtToPhysAddr_: 832a3000 -> 00000000:02b32000 ph data[0]=0:2b2f000 (3fff) get Phys(data[n=1]=832a4000) AtapiVirtToPhysAddr_: 832a4000 -> 00000000:02b33000 ph data[0]=0:2b2f000 (4fff) get Phys(data[n=1]=832a5000) AtapiVirtToPhysAddr_: 832a5000 -> 00000000:02b74000 ph data[1]=0:2b74000 (fff) get Phys(data[n=2]=832a6000) AtapiVirtToPhysAddr_: 832a6000 -> 00000000:02b75000 ph data[1]=0:2b74000 (1fff) get Phys(data[n=2]=832a7000) AtapiVirtToPhysAddr_: 832a7000 -> 00000000:02b76000 ph data[1]=0:2b74000 (2fff) get Phys(data[n=2]=832a8000) AtapiVirtToPhysAddr_: 832a8000 -> 00000000:02b77000 ph data[1]=0:2b74000 (3fff) get Phys(data[n=2]=832a9000) AtapiVirtToPhysAddr_: 832a9000 -> 00000000:02b78000 ph data[1]=0:2b74000 (4fff) get Phys(data[n=2]=832aa000) AtapiVirtToPhysAddr_: 832aa000 -> 00000000:02b79000 ph data[1]=0:2b74000 (5fff) get Phys(data[n=2]=832ab000) AtapiVirtToPhysAddr_: 832ab000 -> 00000000:02b7a000 ph data[1]=0:2b74000 (6fff) get Phys(data[n=2]=832ac000) AtapiVirtToPhysAddr_: 832ac000 -> 00000000:02b3b000 ph data[2]=0:2b3b000 (fff) get Phys(data[n=3]=832ad000) AtapiVirtToPhysAddr_: 832ad000 -> 00000000:02b3c000 ph data[2]=0:2b3b000 (1fff) get Phys(data[n=3]=832ae000) AtapiVirtToPhysAddr_: 832ae000 -> 00000000:02b3d000 ph data[2]=0:2b3b000 (2fff) get Phys(data[n=3]=832af000) AtapiVirtToPhysAddr_: 832af000 -> 00000000:02b3e000 set TERM ph data[2]=0:2b3b000 (3fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 5f 01 00 e0 00 00 00 00 80 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x15f, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x3, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc1dc ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 1df, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 1df, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 832b0000, count 10000, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=832b0000) AtapiVirtToPhysAddr_: 832b0000 -> 00000000:02aff000 ph data[0]=0:2aff000 (fff) get Phys(data[n=1]=832b1000) AtapiVirtToPhysAddr_: 832b1000 -> 00000000:02a00000 ph data[1]=0:2a00000 (fff) get Phys(data[n=2]=832b2000) AtapiVirtToPhysAddr_: 832b2000 -> 00000000:02a41000 ph data[2]=0:2a41000 (fff) get Phys(data[n=3]=832b3000) AtapiVirtToPhysAddr_: 832b3000 -> 00000000:02a42000 ph data[2]=0:2a41000 (1fff) get Phys(data[n=3]=832b4000) AtapiVirtToPhysAddr_: 832b4000 -> 00000000:02a43000 ph data[2]=0:2a41000 (2fff) get Phys(data[n=3]=832b5000) AtapiVirtToPhysAddr_: 832b5000 -> 00000000:02a44000 ph data[2]=0:2a41000 (3fff) get Phys(data[n=3]=832b6000) AtapiVirtToPhysAddr_: 832b6000 -> 00000000:02a45000 ph data[2]=0:2a41000 (4fff) get Phys(data[n=3]=832b7000) AtapiVirtToPhysAddr_: 832b7000 -> 00000000:02a86000 ph data[3]=0:2a86000 (fff) get Phys(data[n=4]=832b8000) AtapiVirtToPhysAddr_: 832b8000 -> 00000000:02a87000 ph data[3]=0:2a86000 (1fff) get Phys(data[n=4]=832b9000) AtapiVirtToPhysAddr_: 832b9000 -> 00000000:02ac8000 ph data[4]=0:2ac8000 (fff) get Phys(data[n=5]=832ba000) AtapiVirtToPhysAddr_: 832ba000 -> 00000000:02ac9000 ph data[4]=0:2ac8000 (1fff) get Phys(data[n=5]=832bb000) AtapiVirtToPhysAddr_: 832bb000 -> 00000000:02aca000 ph data[4]=0:2ac8000 (2fff) get Phys(data[n=5]=832bc000) AtapiVirtToPhysAddr_: 832bc000 -> 00000000:02a8b000 ph data[5]=0:2a8b000 (fff) get Phys(data[n=6]=832bd000) AtapiVirtToPhysAddr_: 832bd000 -> 00000000:02a8c000 ph data[5]=0:2a8b000 (1fff) get Phys(data[n=6]=832be000) AtapiVirtToPhysAddr_: 832be000 -> 00000000:02a8d000 ph data[5]=0:2a8b000 (2fff) get Phys(data[n=6]=832bf000) AtapiVirtToPhysAddr_: 832bf000 -> 00000000:02ace000 set TERM ph data[6]=0:2ace000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 df 01 00 e0 00 00 00 00 80 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x1df, Count 0x80(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x7, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 8000, WordsLeft 8000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 10000, full size 10000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x2 SRB 0xb2452bf0, CDB 0xb2452c20, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2452bf0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc304 ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x1:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 5037, OrigWordsRequested 0x800, DevSize 0x8 IdeReadWrite (REQ): Starting sector is 5037, Number of WORDS 0x800, DevSize 0x8 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 832c0000, count 1000, lCh 1, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=832c0000) AtapiVirtToPhysAddr_: 832c0000 -> 00000000:02acf000 set TERM ph data[0]=0:2acf000 (fff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 1, dev 0 27 80 c8 00 37 50 00 e0 00 00 00 00 08 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x5037, Count 0x8(0x0) UniataAhciBeginTransaction: lChan 1, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch1[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch1[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b2452bf0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 1 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 1 => ch1[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 1 ReadChannelPort4 ch1[20] = 50 TFD 0x50 ReadChannelPort4 ch1[34] = 0 ReadChannelPort4 ch1[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 800, WordsLeft 800 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 1000, full size 1000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2452bf0, status 1 AtapiInterrupt: RequestComplete, srb 0xb2452bf0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=2 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x1 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x2 UniataAhciStatus(1-1): hIS 0x2 ReadChannelPort4 ch1[10] = 0 ReadChannelPort4 ch1[38] = 0 ReadChannelPort4 ch1[34] = 0 WriteChannelPort4 0 => ch1[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:1, irql 0x10, c 1 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb23efbc0, CDB 0xb23efbf0, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb23efbc0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23efbf0) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b23efbf0 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b23efbc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23efbc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb23efbc0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb23efbc0, CDB 0xb23efbf0, AtaReq 0xb2459000, SCmd 0x0 UniataNeedQueueing: TopLevel, qd=0 Send to device 0 TopLevel (2), srb 0xb23efbc0 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 0 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 0 (Cdb b23efbf0) assume 0-transfer AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 zero-transfer AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 00 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=0, Cmd 0 AtapiSendCommand: zero transfer AtapiSendCommand: use_dma=0 AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b23efbf0 Command 0x0 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x0, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b23efbc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 0, WordsLeft 0 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 0, full size 0 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23efbc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb23efbc0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76ac000, count 7800, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76ac000) AtapiVirtToPhysAddr_: f76ac000 -> 00000000:04c75000 ph data[0]=0:4c75000 (fff) get Phys(data[n=1]=f76ad000) AtapiVirtToPhysAddr_: f76ad000 -> 00000000:04c76000 ph data[0]=0:4c75000 (1fff) get Phys(data[n=1]=f76ae000) AtapiVirtToPhysAddr_: f76ae000 -> 00000000:04c77000 ph data[0]=0:4c75000 (2fff) get Phys(data[n=1]=f76af000) AtapiVirtToPhysAddr_: f76af000 -> 00000000:04c78000 ph data[0]=0:4c75000 (3fff) get Phys(data[n=1]=f76b0000) AtapiVirtToPhysAddr_: f76b0000 -> 00000000:04c79000 ph data[0]=0:4c75000 (4fff) get Phys(data[n=1]=f76b1000) AtapiVirtToPhysAddr_: f76b1000 -> 00000000:04c7a000 ph data[0]=0:4c75000 (5fff) get Phys(data[n=1]=f76b2000) AtapiVirtToPhysAddr_: f76b2000 -> 00000000:04c7b000 ph data[0]=0:4c75000 (6fff) get Phys(data[n=1]=f76b3000) AtapiVirtToPhysAddr_: f76b3000 -> 00000000:04c7c000 set TERM ph data[0]=0:4c75000 (77ff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 79 b0 00 00 0f 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 3c00, WordsLeft 3c00 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 7800, full size 7800 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x1 SRB 0xb2453718, CDB 0xb2453748, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb2453718 TopLevel (3), AtaReq 0xb2459000 Try ATAPI send 28 AtapiSendCommand: req state 0x10, Action 3 AtapiSendCommand: prepare..., ATAPI CMD 28 (Cdb b2453748) AtapiSendCommand: force use dma (ahci) AtapiSendCommand: use dma (ahci) AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d5000, count 2000, lCh 0, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d5000) AtapiVirtToPhysAddr_: f76d5000 -> 00000000:3a18f000 ph data[0]=0:3a18f000 (fff) get Phys(data[n=1]=f76d6000) AtapiVirtToPhysAddr_: f76d6000 -> 00000000:3a190000 set TERM ph data[0]=0:3a18f000 (1fff) AtapiDmaSetup: OK AtapiSendCommand: setup AHCI FIS AHCI setup FIS b2459080, ch 0, dev 0 27 80 a0 01 00 00 00 a0 00 00 00 00 00 00 00 80 00 00 00 00 AtapiSendCommand ahci io flags a5: AtapiSendCommand: use_dma=1, Cmd 28 REQ_FLAG_DMA_OPERATION AtapiSendCommand: AtapiDmaReinit() AtapiSendCommand: use_dma=1 REQ_FLAG_DMA_OPERATION AtapiSendCommand: CMD_ACTION_EXEC AtapiSendCommand: Cdb b2453748 Command 0x28 to TargetId 0 lun 0 AtapiSendCommand: Entered with status 0x50 ReadChannelPort4 ch0[38] = 0 AtapiSendCommand: AHCI, begin transaction UniataAhciBeginTransaction: lChan 0, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0xa5, base 4d58080 ReadChannelPort4 ch0[18] = 1100c017 CMD 0x1100c017 ATAPI 28 00 00 01 79 b0 00 00 04 00 00 00 00 00 00 00 WriteChannelPort4 1 => ch0[38] AtapiStartIo: next Srb b2453718 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 1 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 1 => ch0[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE dev_type ATAPI OldReqState = 20 UniataAhciEndTransaction: lChan 0 ReadChannelPort4 ch0[20] = 50 TFD 0x50 ReadChannelPort4 ch0[34] = 0 ReadChannelPort4 ch0[38] = 0 AtapiInterrupt: ATAPI Entered with status (0x50) AHCI branch (ATAPI) AtapiInterrupt: ATAPI branch AtapiInterrupt: iReason 1 AtapiInterrupt: i-reason=1, status=0x50 AHCI path, WordsTransfered 1000, WordsLeft 1000 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 2000, full size 2000 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb2453718, status 1 AtapiInterrupt: RequestComplete, srb 0xb2453718 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=1 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x0 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x1 UniataAhciStatus(0-0): hIS 0x1 ReadChannelPort4 ch0[10] = 0 ReadChannelPort4 ch0[38] = 0 ReadChannelPort4 ch0[34] = 0 WriteChannelPort4 0 => ch0[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:0, irql 0x10, c 0 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb23efbc0, CDB 0xb23efbf0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb23efbc0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc45c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8e00, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8e00) AtapiVirtToPhysAddr_: f76d8e00 -> 00000000:04cd5e00 set TERM ph data[0]=0:4cd5e00 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b23efbc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23efbc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb23efbc0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb23efbc0, CDB 0xb23efbf0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb23efbc0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc45c ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 3f, OrigWordsRequested 0x100, DevSize 0x1 IdeReadWrite (REQ): Starting sector is 3f, Number of WORDS 0x100, DevSize 0x1 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data f76d8e00, count 200, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=f76d8e00) AtapiVirtToPhysAddr_: f76d8e00 -> 00000000:04cd5e00 set TERM ph data[0]=0:4cd5e00 (1ff) AtapiDmaSetup: OK IdeReadWrite: setup AHCI FIS AHCI setup FIS b2459080, ch 2, dev 0 27 80 c8 00 3f 00 00 e0 00 00 00 00 01 00 00 80 00 00 00 00 IdeReadWrite ahci io flags 5: AtapiDmaReinit: ahci, nothing to do for HDD IdeReadWrite: Lba 0x3f, Count 0x1(0x0) UniataAhciBeginTransaction: lChan 2, AtaReq 0xb2459000 AHCI AtaReq CMD 0xb2459080 (ph 0x4d58080) prd_length 0x1, flags 0x5, base 4d58080 ReadChannelPort4 ch2[18] = 1000c017 CMD 0x1000c017 WriteChannelPort4 1 => ch2[38] IdeSendCommand: SRB_STATUS_PENDING IdeSendCommand: REQ_STATE_EXPECTING_INTR AtapiStartIo: next Srb b23efbc0 AtapiStartIo: query PORT for next request AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 2) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 1 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 1 => ch2[10] AHCI: is=00000001 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x1 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE dev_type IDE OldReqState = 40 UniataAhciEndTransaction: lChan 2 ReadChannelPort4 ch2[20] = 50 TFD 0x50 ReadChannelPort4 ch2[34] = 0 ReadChannelPort4 ch2[38] = 0 AtapiInterrupt: Entered with status (0x50) AHCI branch (IDE) AtapiInterrupt: i-reason=2, status=0x58 AHCI path, WordsTransfered 100, WordsLeft 100 AtapiInterrupt: CompleteRequest, srbstatus 1 Transfered 200, full size 200 AtapiInterrupt: RequestComplete AtapiInterrupt: set AutoSense AtapiInterrupt: remove srb 0xb23efbc0, status 1 AtapiInterrupt: RequestComplete, srb 0xb23efbc0 AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 AtapiInterrupt2: NOT ACTIVE cntrlr 0x0 chan 0x0 Intr: VendorID+DeviceID/Rev 0x28298086/0x2 (ex 1) AtapiInterrupt(base): AHCI: hIS=4 cntrlr 0x0 chan 0x0 AtapiInterrupt(base): cntrlr 0x0 chan 0x2 AtapiInterrupt(base): try lock AtapiInterrupt(base): locked AtapiCheckInterrupt__: imp: 0xf & 0x4 UniataAhciStatus(2-2): hIS 0x4 ReadChannelPort4 ch2[10] = 0 ReadChannelPort4 ch2[38] = 0 ReadChannelPort4 ch2[34] = 0 WriteChannelPort4 0 => ch2[10] AHCI: is=00000000 ss=00000123 serror=00000000 CI=00000000, ACT=00000000 AHCI: complete mask 0x0 AtapiInterrupt: cntrlr 0x0:2, irql 0x10, c 2 DmaTransfer = TRUE AtapiInterrupt: NextRequest, srb=0x0 AtapiInterrupt: ReturnEnableIntr AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1 AtapiInterrupt(base): return status TRUE AtapiInterrupt(base): exit with status 0x1 TopLevel ** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x2:0x0:0x0 VendorID+DeviceID/Rev 0x28298086/0x2 imp: 0xf & 0x4 SRB 0xb23efbc0, CDB 0xb23efbf0, AtaReq 0xb2459000, SCmd 0x28 UniataNeedQueueing: TopLevel, qd=0 Send to device 28 TopLevel (2), srb 0xb23efbc0 TopLevel (3), AtaReq 0xb2459000 Try IDE send ** Ide: Command: entryway ** Ide: Command: ** Ide: Command &AtaReq 0xf76dc1dc ** Ide: Command AtaReq 0xb2459000 ** --- ** IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x2:0x0:0x0 IdeReadWrite (Orig REQ): Starting sector 869, OrigWordsRequested 0x8000, DevSize 0x80 IdeReadWrite (REQ): Starting sector is 869, Number of WORDS 0x8000, DevSize 0x80 AtaReq 0xb2459000: cmd aligned b2459080, d=20 ahci_cmd_ptr 0xb2459080 AtapiDmaSetup: mode 0x48, data 83300000, count 10000, lCh 2, dev 0 get Phys(AHCI_CMD=b2459080) AtapiVirtToPhysAddr_: b2459080 -> 00000000:04d58080 get Phys(data[0]=83300000) AtapiVirtToPhysAddr_: 83300000 -> 00000000:3a1da000 ph data[0]=0:3a1da000 (fff) get Phys(data[n=1]=83301000) AtapiVirtToPhysAddr_: 83301000 -> 00000000:3a1db000 ph data[0]=0:3a1da000 (1fff) get Phys(data[n=1]=83302000) AtapiVirtToPhysAddr_: 83302000 -> 00000000:3a1dc000 ph data[0]=0:3a1da000 (2fff) get Phys(data[n=1]=83303000) AtapiVirtToPhysAddr_: 83303000 -> 00000000:3a1dd000 ph data[0]=0:3a1da000 (3fff) get Phys(data[n=1]=83304000) AtapiVirtToPhysAddr_: 83304000 -> 00000000:3a1de000 ph data[0]=0:3a1da000 (4fff) get Phys(data[n=1]=83305000) AtapiVirtToPhysAddr_: 83305000 -> 00000000:3a1df000 ph data[0]=0:3a1da000 (5fff) get Phys(data[n=1]=83306000) Atapi