OnCreateş(../../ntoskrnl/kd/kdio.c:376) -----------------------------------------------------
(../../ntoskrnl/kd/kdio.c:377) ReactOS 0.4-SVN (Build 20150924-r69346)
(../../ntoskrnl/kd/kdio.c:379) 1 System Processor [375 MB Memory]
(../../ntoskrnl/kd/kdio.c:380) Command Line: NOGUIBOOT KDSERIAL DEBUGPORT=COM1 FIRSTCHANCE
(../../ntoskrnl/kd/kdio.c:384) ARC Paths: multi(0)disk(0)cdrom(31) \ multi(0)disk(0)cdrom(31) \reactos\
(../../ntoskrnl/ke/i386/cpu.c:450) Supported CPU features : KF_V86_VIS KF_RDTSC KF_CR4  KF_GLOBAL_PAGE KF_LARGE_PAGE  KF_CMPXCHG8B KF_MMX KF_WORKING_PTE     KF_3DNOW KF_AMDK6MTRR     
(../../ntoskrnl/ke/i386/cpu.c:722) Prefetch Cache: 32 bytesL2 Cache: 0 bytesL2 Cache Line: 64 bytesL2 Cache Associativity: 0
(../../hal/halx86/generic/dma.c:156) Machine supports EISA DMA. Bus type: 0
(../../ntoskrnl/ke/i386/cpu.c:1009) No support for SYSENTER detected.
(../../ntoskrnl/mm/mminit.c:132)           0x80000000 - 0x83000000Boot Loaded Image
(../../ntoskrnl/mm/mminit.c:136)           0xB0000000 - 0xB0293000PFN Database
(../../ntoskrnl/mm/mminit.c:140)           0xB0293000 - 0xB0E23000ARM3 Non Paged Pool
(../../ntoskrnl/mm/mminit.c:144)           0xB9400000 - 0xBB400000System View Space
(../../ntoskrnl/mm/mminit.c:148)           0xBB400000 - 0xC0000000Session Space
(../../ntoskrnl/mm/mminit.c:151)           0xC0000000 - 0xC03FFFFFPage Tables
(../../ntoskrnl/mm/mminit.c:154)           0xC0300000 - 0xC0300FFFPage Directories
(../../ntoskrnl/mm/mminit.c:157)           0xC0400000 - 0xC07FFFFFHyperspace
(../../ntoskrnl/mm/mminit.c:161)           0xE1000000 - 0xECC00000ARM3 Paged Pool
(../../ntoskrnl/mm/mminit.c:164)           0xECC00000 - 0xF7BE0000System PTE Space
(../../ntoskrnl/mm/mminit.c:167)           0xF7BE0000 - 0xFFBE0000Non Paged Pool Expansion PTE Space
(../../ntoskrnl/config/cmsysini.c:516) CmpCreateHardwareProfile() done
(../../ntoskrnl/config/cmsysini.c:793) CmpCreateControlSet() done
(../../ntoskrnl/config/cmhvlist.c:158) CmpAddToHiveFileList: Creation or opening of the hive list failed, status = c0000034
(../../hal/halx86/legacy/bussupp.c:688) Your machine has a PCI-to-PCI or CardBUS Bridge. PCI devices may fail!
(../../hal/halx86/legacy/bussupp.c:717) Found parent bus (indicating PCI Bridge). PCI devices may fail!

====== PCI BUS HARDWARE DETECTION =======

00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 530 Host [1039:0530] (rev 03)
Subsystem: GLoria L [0000:0000]
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, non-prefetchable) [size=256M]

00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 IDE Controller [1039:5513] (rev d0)
Subsystem: SiS5513 EIDE Controller (A,B step) [1039:5513]
Flags: bus master, fast devsel, latency 128, IRQ 14
I/O ports at 01f0 [size=16]
I/O ports at 03f4 [size=4]
I/O ports at 0170 [size=16]
I/O ports at 0374 [size=4]
I/O ports at 4000 [size=16K]

00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge) [1039:0008] (rev b3)
Subsystem: GLoria L [0000:0000]
Flags: bus master, medium devsel, latency 0

00:01.1  [ff00]: Silicon Integrated Systems [SiS] 5595 Power Management Controller [1039:0009] (rev 00)
Subsystem: Unknown [0001:0001]
Flags: medium devsel, latency 0

00:01.2 USB controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 11)
Subsystem: GLoria L [0000:0000]
Flags: bus master, medium devsel, latency 32, IRQ 03
Memory at d5902000 (32-bit, non-prefetchable) [size=8K]
Device is using IRQ 3! ISA Cards using that IRQ may fail!
Device is an OHCI (USB) PCI Expansion Card. Turn off Legacy USB in your BIOS!

00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) [1039:0001] (rev 00)
Subsystem: GLoria L [0000:0000]
Flags: bus master, fast devsel, latency 0
Memory at 00010100 (32-bit, non-prefetchable) [size=256]
Memory at 20009090 (32-bit, non-prefetchable) [size=4K]
Memory at d580d580 (32-bit, non-prefetchable) [size=256]
Memory at d570d500 (32-bit, non-prefetchable) [size=256]

00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139]
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=1K]
Memory at d5900000 (32-bit, non-prefetchable) [size=1M]
Device is using IRQ 11! ISA Cards using that IRQ may fail!

00:0b.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet [1282:9102] (rev 10)
Subsystem: DM9102A (DM9102AE, SM9102AF) Ethernet 100/10 MBit [0291:8212]
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at b800 [size=2K]
Memory at d5901000 (32-bit, non-prefetchable) [size=4K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!

00:0c.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio [13f6:0111] (rev 10)
Subsystem: CMI8738/C3DX PCI Audio Device [13f6:0111]
Flags: bus master, medium devsel, latency 32, IRQ 05
I/O ports at bc00 [size=1K]
Device is using IRQ 5! ISA Cards using that IRQ may fail!

00:0c.1 Communication controller [0780]: C-Media Electronics Inc CM8738 [13f6:0211] (rev 10)
Subsystem: Unknown [13f6:0211]
Flags: medium devsel, latency 0, IRQ 10
I/O ports at c000 [size=16K]
Device is using IRQ 10! ISA Cards using that IRQ may fail!

01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 530/620 PCI/AGP VGA Display Adapter [1039:6306] (rev a3)
Subsystem: Unknown [1039:6306]
Flags: bus master, 66MHz, medium devsel, latency 32
Memory at d5000000 (32-bit, prefetchable) [size=16M]
Memory at d5800000 (32-bit, non-prefetchable) [size=8M]
I/O ports at 9000 [size=4K]

====== PCI BUS DETECTION COMPLETE =======

PC Compatible Eisa/Isa HAL Detected
(../../ntoskrnl/io/pnpmgr/pnpinit.c:62) WARNING!! In PiInitCacheGroupInformation, using ReactOS HACK for SETUPLDR!!
(../../ntoskrnl/io/pnpmgr/pnpinit.c:455) Need to build DACL
(../../ntoskrnl/io/pnpmgr/pnpmgr.c:3212) ZwOpenKey(\Registry\Machine\SYSTEM\CURRENTCONTROLSET\Control\Pnp) failed with status 0xc0000034
(../../ntoskrnl/ps/apphelp.c:410) SHIMS: ApphelpCacheInitialize
(../../ntoskrnl/ps/apphelp.c:298) SHIMS: ApphelpCacheRead could not even open Session Manager\AppCompatCache (0xc0000034)
(../../ntoskrnl/ps/apphelp.c:428) SHIMS: ApphelpCacheInitialize: 0
(../../ntoskrnl/wmi/wmi.c:72) IoWMIRegistrationControl() called for DO B0DF7F18, requesting 1 action, returning success
(../../lib/rtl/image.c:171) Invalid base address: 00000000
(../../ntoskrnl/io/iomgr/driver.c:1629) '\Driver\sacdrv' initialization failed, status (0xc0000037)
(../../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\sacdrv'


ATAPI IDE MiniPort Driver (UniATA) v 0.45h9
 Parameter PrintLogo
 Parameter PrintLogo = 0x0
UniATA Init: OS should be ReactOS
UniATA Init: OS ver 4.1 (1), 1 CPU(s)
Performance calibration: dt=14995, counter=227602
InitBadBlocks general
InitBadBlocks returned: 0xc0000034
UniataInitAtaCommands:
 Parameter SkipRaids
 Parameter SkipRaids = 0x1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
 Parameter LogToDisplay
 Parameter LogToDisplay = 0x0
HwInitializationDataSize = 50
set NeedPhysicalAddresses = TRUE
set AtapiAdapterControl() ptr


ATAPI IDE enum supported BusMaster Devices
 Parameter VirtualMachineType
 Parameter VirtualMachineType = 0x0
 Parameter VirtualBox
 Parameter VirtualBox = 0x0
-- BusID: 0x0:0x0:0x1
Storage Class
DevId = 55131039 Class = 0001/0001, ProgIf 8A
(!) InterruptPin = 0x1
(!) InterruptLine = 0xe
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 0
InterruptPin = 0x1
InterruptLine = 0xe
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0xe
Final pciData.Command = 0x7
Range 0 = 0x1f1
Range 1 = 0x3f5
Range 2 = 0x171
Range 3 = 0x375
Range 4 = 0x4001
count: BMListLen++
-- BusID: 0x0:0x0:0x1
Storage Class
DevId = 55131039 Class = 0001/0001, ProgIf 8A
(!) InterruptPin = 0x1
(!) InterruptLine = 0xe
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 1
InterruptPin = 0x1
InterruptLine = 0xe
Range 0 = 0x1f1
Range 1 = 0x3f5
Range 2 = 0x171
Range 3 = 0x375
Range 4 = 0x4001
found suitable device
 Parameter NativePCIMode
 Parameter NativePCIMode = 0x0
Add to BMList, AltInit 0
-- BusID: 0x0:0x0:0x1
Storage Class
DevId = 55131039 Class = 0001/0001, ProgIf 8A
(!) InterruptPin = 0x1
(!) InterruptLine = 0xe
 Parameter Include
 Parameter Include = 0x0
No force include, check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
Default device
found, pass 2
InterruptPin = 0x1
InterruptLine = 0xe
Range 0 = 0x1f1
Range 1 = 0x3f5
Range 2 = 0x171
Range 3 = 0x375
Range 4 = 0x4001
found suitable device
  BMListLen=1
 Parameter WaitBusyCount
 Parameter WaitBusyCount = 0xc8
 Parameter WaitBusyDelay
 Parameter WaitBusyDelay = 0xa
 Parameter WaitDrqDelay
 Parameter WaitDrqDelay = 0xa
 Parameter WaitBusyLongCount
 Parameter WaitBusyLongCount = 0x7d0
 Parameter WaitBusyLongDelay
 Parameter WaitBusyLongDelay = 0xfa
 Parameter AtapiSendDisableIntr
 Parameter AtapiSendDisableIntr = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter MaxIsrWait
 Parameter MaxIsrWait = 0x28


ATAPI IDE: Look for legacy ISA-bridged PCI IDE controller (onboard)


ATAPI IDE: BMListLen 1
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
UniataClaimLegacyPCIIDE:
(../../hal/halx86/legacy/bussupp.c:1253) Slot assignment for 5 on bus 0
(../../hal/halx86/legacy/bus/pcibus.c:727) WARNING: PCI Slot Resource Assignment is FOOBAR
ok 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 0, method 0
UniataFindBusMasterController: Context=0, BMListLen=1
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 0, channel 0 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x20
busDataRead
DevId = 55131039 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x155
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
ATA_SIS_ID
AtapiFindListedDev: lim=ffffffff, Bus=0, Slot=ffffffff
 scanning range Bus 0-0, Slot 0-1f
AtapiFindListedDev: found
AtapiFindListedDev: b:s:f(0:0:0) 1039/0530/03
i: 0x16
HwFlags: 0x7
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x7
HwFlagsOverride: 0x7
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x7
MaxTransferMode: 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
Found SIS_SOUTH
ForceSimplex = 0
HwFlags = 7
 (0)HwFlags = 7
 (1)HwFlags = 7
 (2)found suitable device
HwFlags = 7
 (3)Range 0 = 0x1f1
Range 1 = 0x3f5
Range 2 = 0x171
Range 3 = 0x375
Range 4 = 0x4001
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x0, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0x4000
  BusMasterAddress (base): 0x4000
AtapiReadChipConfig: devExt 0xb0df69fc
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0xe
Final pciData.Command = 0x7
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[0] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x0, NumberChannels 0x1, channel 0x0
de 0xb0df69fc, Channel 0x0
chan = 0xb0df6278
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb0df6278
  Lun 0x0
  Lun ptr 0xb0bb9008
  Lun 0x1
  Lun ptr 0xb0bb9310
AtapiReadChipConfig: devExt 0xb0df69fc
AtapiReadChipConfig: dev 0x0, ph chan 0
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x1f0
IO range 2 0x3f6
IDX_IO1 0->1f0(io)
IDX_IO2 10->3f6(io)
IDX_BM_IO 14->4000(io)
IDX_SATA_IO 19->0(io)
  AltStatus (0x50)
  Reg_0x1 (0x1f1) = 0x0
  Reg_0x2 (0x1f2) = 0x0
  Reg_0x3 (0x1f3) = 0x1
  Reg_0x4 (0x1f4) = 0x0
  Reg_0x5 (0x1f5) = 0x0
  Reg_0x6 (0x1f6) = 0xe0
  Reg_0x7 (0x1f7) = 0x50
  BM_0x0 (0x4000) = 0x0
  BM_0x1 (0x4001) = 0x0
  BM_0x2 (0x4002) = 0x24
  BM_0x3 (0x4003) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x24
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Primary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b0df5008 -> 00000000:03b62008
AtapiVirtToPhysAddr_: b0b99000 -> 00000000:03906000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb0bba558
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb0bba558
do not tell system, that we know about PCI IO ranges
final chan[1] InterruptMode: 1, Level 14, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 0 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0xe
Final pciData.Command = 0x7
AtapiChipInit: dev 0xffffffff, ph chan 0, c 0
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  HDD at home
  HDD at home
CheckDevice: status 0x51
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x50)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xec, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
  use 16bit IO
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: eMomyrC ra ddApaet r
FW:    7682
S/N:                      0
Pio:   2
APio:  3
SWDMA: 0
MWDMA: 0
UDMA:  0/1f
SATA:  0
SATA support: 0, CAPs 0x0
OrigTransferMode: 44, Active: c
Accoustic 0, cur 0
AdvPowerMode 0, cur 0
IssueIdentify: Marking drive 0 as removable. SFE = 1
PhysLogSectorSize 0x0, 0x0, offset 0x0
NV PM_Sup 0, PM_En 0, En 0, PM ver 0x0 ver 0x0
R-rate 0
CHS 0x1df7:0x10:0x3f
NumOfSectors 0x75fc90
SupportLba flag 0x1
MajorRevision 0x7e
UserAddressableSectors 0x760000
LBA mode
Use IDE_COMMAND_READ_NATIVE_SIZE
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xf8, lba 0x0 count 0x0 feature 0x0
requested LunExt->GeomType=ffffffff
tmp_cylinders = 0x1df7
cylinders = tmp_cylinders (0 = 0)
Geometry: C 0x1df7 (0x1df7)
Geometry: H 0x10 (0x10)
Geometry: S 0x3f (0x3f)
InitBadBlocks local
LunExt 0xb0bb9008
S/N:Memory_Card_Adapter_____________________-__________________0_
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: hard drive.
IssueIdentify: final Status on exit (0x51)
CheckDevice: Device 0x0 is IDE
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 51:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x0
AtapiDisableInterrupts_0: 1
AtapiEnableInterrupts_0: 2
IssueIdentify: Status after soft reset (0x0)
IssueIdentify: Status before read words 0x0
IssueIdentify: statusByte 0x0
IssueIdentify: !IDE_STATUS_DRQ (2) (0x0)
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x51
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x0
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: IDE branch
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x95
IdeMediaStatus: Media Status Notification Supported
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc6, lba 0x0 count 0x1 feature 0x0
AtapiHwInitialize: Using Multiblock on Device 0. Blocks / int - 1
  Try Enable Read Cache
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0xaa
AtapiHwInitialize: Enable read/write cacheing on Device 0 failed
  Try Enable Write Cache
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x0 feature 0x2
AtapiHwInitialize: Enable write cacheing on Device 0 failed
  try mode 0x44
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x4
IDE_STATUS_ERROR detected on entry, statusByte = 0x51
Setup chip a:w:u=4:2:4
AtaSetTransferMode: Set 0x44 on Device 0/0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xef, lba 0x0 count 0x44 feature 0x3
Using 0x44 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiHwInitialize: (base) done
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ff90, CDB 0xf789ffc0, AtaReq 0xb0de4000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf789ff90
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fc78
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_INQUIRY PATH:LUN:TID = 0x0:0x0:0x0
IdeSendCommand: SCSIOP_INQUIRY ok
  HDD at home
RemovableMedia
RelativeAddressing
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ff90 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ff90)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   VendorID+DeviceID/Rev 0x55131039/0xd0
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf789ff90
TopLevel (3), AtaReq 0xb0de4000
  HDD at home
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
  HDD at home
  HDD at home
CheckDevice: status 0x0
CheckDevice: IDE device check
IssueIdentify: Checking for IDE. Status (0x0)
IssueIdentify: statusByte != IDE_STATUS_IDLE
IssueIdentify: no dev (dev 1)
CheckDevice: try ATAPI 0x1, status 0x0
IssueIdentify: Checking for ATAPI. Status (0x0)
IssueIdentify: Checking for ATAPI (2). Status (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x1, cmd 0xa1, lba 0x0 count 0x0 feature 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
  retry waiting DRQ, status 0x0
IssueIdentify: !IDE_STATUS_DRQ (0x0)
IssueIdentify: DRQ never asserted (0x0). Error reg (0x4)
AtapiSoftReset:
  statusByte2 0:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
AtapiDisableInterrupts_0: 0
AtapiEnableInterrupts_0: 1
IssueIdentify: Status after soft reset (0x0)
IssueIdentify: Status before read words 0x0
IssueIdentify: statusByte 0x0
IssueIdentify: !IDE_STATUS_DRQ (2) (0x0)
CheckDevice: Device 0x1 not responding
CheckDevice: check status: not found
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ff90)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x0
  base status 0x0
  no DRQ/DRDY set
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf789ff90 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
 Parameter IgnoreIsaCompatiblePci
 Parameter IgnoreIsaCompatiblePci = 0x0
Try init channel 1, method 0
UniataFindBusMasterController: Context=0, BMListLen=1
ConfigInfo->Length 8c
AdapterInterfaceType: Isa
bm_offset 8, channel 1 
AdapterInterfaceType=0x1
IoBusNumber=0x0
slotNumber=0x20
busDataRead
DevId = 55131039 Class = 0001/0001
Storage Class
MasterDev (1)
Check exclude
 Parameter Exclude
 Parameter Exclude = 0x0
UniataChipDetect:
HwFlags: 0x0
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
i: 0x155
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
ATA_SIS_ID
AtapiFindListedDev: lim=ffffffff, Bus=0, Slot=ffffffff
 scanning range Bus 0-0, Slot 0-1f
AtapiFindListedDev: found
AtapiFindListedDev: b:s:f(0:0:0) 1039/0530/03
i: 0x16
HwFlags: 0x7
 Parameter HwFlagsOverride
 Parameter HwFlagsOverride = 0x7
HwFlagsOverride: 0x7
 Parameter HwFlagsAdd
 Parameter HwFlagsAdd = 0x0
HwFlagsAdd: 0x0
HwFlags (final): 0x7
MaxTransferMode: 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
UniataChipDetectChannels:
MasterDev -> 1 chan
 Parameter Exclude
 Parameter Exclude = 0x0
PortMask 0x1
 Parameter PortMask
 Parameter PortMask = 0x1
Force PortMask 0x1
mask -> 1 chans
 Parameter NumberChannels
 Parameter NumberChannels = 0x1
reg -> 1 chans
Final PortMask 0x1
allocate 2 Luns for 1 channels
Found SIS_SOUTH
ForceSimplex = 0
HwFlags = 7
 (0)HwFlags = 7
 (1)HwFlags = 7
 (2)found suitable device
HwFlags = 7
 (3)Range 0 = 0x1f1
Range 1 = 0x3f5
Range 2 = 0x171
Range 3 = 0x375
Range 4 = 0x4001
IsBusMaster == TRUE
  AtapiGetIoRange:
  AtapiGetIoRange: rid 0x4, start 0x0, offs 0x8, len 0x8, mem 0x0
  AtapiGetIoRange: (2) 0x4008
  BusMasterAddress (base): 0x4008
AtapiReadChipConfig: devExt 0xb0de3cec
AtapiReadChipConfig: dev 0x0, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0x44
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0x0, ph chan -2, c -1
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0xe
Final pciData.Command = 0x7
AtapiChipInit: dev 0x0, ph chan 0, c 0
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
simplexOnly = 0 (2)MasterDev (2)
1 channels & 1 irq for 1 controller
update ConfigInfo->nt4
using AtaReq sz 1000
update ConfigInfo->w2k: 64bit 0
chan[1] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
Reconstruct ConfigInfo
BMList[i].channel 0x1, NumberChannels 0x1, channel 0x1
de 0xb0de3cec, Channel 0x1
chan = 0xb0de3568
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb0de3568
  Lun 0x0
  Lun ptr 0xb0b96008
  Lun 0x1
  Lun ptr 0xb0b96310
AtapiReadChipConfig: devExt 0xb0de3cec
AtapiReadChipConfig: dev 0x0, ph chan 1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
MaxTransferMode (overriden): 0x44
 Parameter ReorderEnable
 Parameter ReorderEnable = 0x1
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
 Parameter ReadCacheEnable
 Parameter ReadCacheEnable = 0x1
 Parameter WriteCacheEnable
 Parameter WriteCacheEnable = 0x1
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0x44
 Parameter PreferedTransferMode
 Parameter PreferedTransferMode = 0xffffffff
 Parameter AdvancedPowerMode
 Parameter AdvancedPowerMode = 0x80
 Parameter AcousticMgmt
 Parameter AcousticMgmt = 0x80
 Parameter StandbyTimer
 Parameter StandbyTimer = 0x0
 Parameter ReadOnly
 Parameter ReadOnly = 0x0
 Parameter GeomType
 Parameter GeomType = 0xffffffff
 Parameter Hidden
 Parameter Hidden = 0x0
set AccessRanges
Getting IO ranges
IO range 1 0x170
IO range 2 0x376
IDX_IO1 0->170(io)
IDX_IO2 10->376(io)
IDX_BM_IO 14->4008(io)
IDX_SATA_IO 19->0(io)
  AltStatus (0x50)
  Reg_0x1 (0x171) = 0x0
  Reg_0x2 (0x172) = 0x3
  Reg_0x3 (0x173) = 0x0
  Reg_0x4 (0x174) = 0x0
  Reg_0x5 (0x175) = 0x8
  Reg_0x6 (0x176) = 0xa0
  Reg_0x7 (0x177) = 0x50
  BM_0x0 (0x4008) = 0x0
  BM_0x1 (0x4009) = 0x0
  BM_0x2 (0x400a) = 0x24
  BM_0x3 (0x400b) = 0x0
clean IDE intr 0
clean IDE intr 1
  DMA status 0x24
  clear unexpected DMA intr
AtapiDmaDone: dev 0
claim Compatible controller
claim Secondary
AtapiDmaAlloc: allocate tmp buffers below 4Gb
AtapiVirtToPhysAddr_: b0de2008 -> 00000000:03b4f008
AtapiVirtToPhysAddr_: b0b76000 -> 00000000:038e3000
exit: init spinlock
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb0bba558
Init ISR:
Unnecessary
MasterDev=0x1, NumberChannels=0x1, Isr2DevObj=0xb0bba558
do not tell system, that we know about PCI IO ranges
final chan[2] InterruptMode: 1, Level 15, Level2 0, Vector 0, Vector2 0
return SP_RETURN_FOUND
Attempt 0 of MasterDev ok
(../../ntoskrnl/io/iomgr/iorsrce.c:874) IoReportResourceUsage is halfplemented!
AtapiHwInitialize: (base)
  mark chan 1 of master controller [0] as inited
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
  re-enable IO resources of MasterDev
Enabling Mem/Io spaces and busmastering...
Initial pciData.Command = 0x7
PCI_ENABLE_IO_SPACE
PCI_ENABLE_MEMORY_SPACE
PCI_ENABLE_BUS_MASTER
InterruptLine = 0xe
Final pciData.Command = 0x7
AtapiChipInit: dev 0xffffffff, ph chan 1, c 0
HwFlags: 0x7
VendorID/DeviceID/Rev 0x1039/0x5513/0xd0
FindDevices:
AtapiDisableInterrupts_0: 0
  max_ldev 2
CheckDevice: Device 0x0
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 0
  ATAPI at home
  ATAPI at home
CheckDevice: status 0x10
CheckDevice: ATAPI signature found
IssueIdentify: Checking for ATAPI. Status (0x10)
IssueIdentify: Checking for ATAPI (2). Status (0x10)
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xa1, lba 0x20000 count 0x0 feature 0x0
IssueIdentify: IDE_STATUS_DRQ (0x58)
IssueIdentify: Status before read words 0x58
IssueIdentify: statusByte 0x58
IssueIdentify: BASE statusByte 0x58
  use 16bit IO
IssueIdentify: iReason 2
IssueIdentify: wCount 200
IssueIdentify: suck data port
IssueIdentify: statusByte 0x50
IssueIdentify: statusByte 0x50
IssueIdentify: Status after read words 0x50
Model: DCR-MO5 X2A/HK      
FW:    6A 4
S/N:                       
Pio:   3
APio:  3
SWDMA: 1
MWDMA: 1
UDMA:  4/7
SATA:  0
SATA support: 0, CAPs 0x3030
OrigTransferMode: 47, Active: 47
Accoustic 0, cur 0
AdvPowerMode 0, cur 0
InitBadBlocks local
LunExt 0xb0b96008
S/N:CD-ROM_52X/AKH__________________________-____________________
IssueIdentify: Device does not interrupt on assertion of DRQ.
IssueIdentify: Device is CD/Optical drive.
IssueIdentify: AtapiCmdSize 0x0
IssueIdentify: final Status on exit (0x50)
CheckDevice: Device 0x0 is ATAPI
CheckDevice: check status: found
CheckDevice: Device 0x1
CheckDevice: reset dev
AtapiSoftReset:
  statusByte2 50:
 set DFLAGS_REINIT_DMA
  DMA status 0x4
  clear unexpected DMA intr on ATAPI reset
AtapiDmaDone: dev 1
  nobody home! last chance failed 0x81 != 0x7f
FindDevices: select 0 dev to clear INTR
FindDevices: statusByte=0x50
FindDevices: select 1 dev to clear INTR
FindDevices: statusByte=0x7f
FindDevices: select 0 dev on exit
AtapiEnableInterrupts_0: 1
FindDevices: returning 1
AtapiHwInitialize: lChannel 0x0, dev 0
AtapiDisableInterrupts_0: 0
AtapiHwInitialize: ATAPI/Changer branch
  try mode 0x44
AtapiDmaInit__: Set (U)DMA on Device 0
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x44
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0x2
Setup chip a:w:u=4:2:2
AtaSetTransferMode: Set 0x42 on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0x42 feature 0x3
Using 0x42 mode
AtapiEnableInterrupts_0: 1
AtapiHwInitialize: lChannel 0x0, dev 1
AtapiHwInitialize: (base) done
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x50
  base status 0x50
  Unexpected interrupt.
  ATAPI additional check
AtapiCheckInterrupt__: ATAPI int reason 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ff90, CDB 0xf789ffc0, AtaReq 0xb0b65000, SCmd 0x12
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf789ff90
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send 12
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: BuildMechanismStatusSrb()
 MechanismStatusSrb 0xb0de35a4
AtapiSendCommand: AtapiSendCommand recursive
AtapiSendCommand: req state 0x20, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb b0de35d4)
  assume IN
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiDmaReinit: set PIO mode on Device 0 (42 -> c)
AtapiDmaInit: chan->MaxTransferMode >= ATA_UDMA
AtapiDmaInit: LunExt->LimitedTransferMode 0x42
AtapiDmaInit: LunExt->MaxTransferMode >= ATA_UDMA   =>   0xffffffff
Setup chip a:w:u=4:-1:-1
AtaSetTransferMode: Set 0xc on Device 0/0
AtaCommand48: cntrlr 0x0:0x1 dev 0x0, cmd 0xef, lba 0x0 count 0xc feature 0x3
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0de35d4 Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiSendCommand: SRB_STATUS_PENDING (2)
AtapiStartIo: next Srb f789ff90
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xb0de3584, srb->DataBuffer 0xb0de3584
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: OriginalSrb != NULL
AtapiInterrupt: SCSIOP_MECHANISM_STATUS status 0x1
AtapiSendCommand: req state 0x50, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 12 (Cdb f789ffc0)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 12
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f789ffc0 Command 0x12 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiInterrupt: chan->ExpectingInterrupt 1 (1)
AtapiInterrupt: send orig SRB_STATUS_PENDING (1)
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  ATAPI status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x12
IdeIntr: Read 0x12 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf782cc40, srb->DataBuffer 0xf782cc40
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf782cc64, srb->DataBuffer 0xf782cc40, len 0x24
   Transfered 2c, full size 24
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf789ff90, status 1
AtapiInterrupt: RequestComplete, srb 0xf789ff90
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x1:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x1
   VendorID+DeviceID/Rev 0x55131039/0xd0
UniataNeedQueueing: TopLevel, qd=0
Send to device 12
TopLevel (2), srb 0xf789ff90
TopLevel (3), AtaReq 0xb0b65000
  nobody home! last chance failed 0x81 != 0x7f
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: AtapiDmaDBSync(b0de3568, f789ff90)
AtapiStartIo: UniataRemoveRequest(b0de3568, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0de3568, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x7f
  base status 0x7f
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: Communication port
  INQUIRY
AtapiStartIo: Srb 0xf789ff90 complete with status 0x1
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x1:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x1:0x0:0x1
   VendorID+DeviceID/Rev 0x55131039/0xd0
AtapiStartIo: SRB rejected
SRB_STATUS_SELECTION_TIMEOUT
AtapiStartIo: Srb 0xf789ff90 complete with status 0xa
AtapiStartIo: UniataRemoveRequest(0, f789ff90)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan 0, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
ScsiPortInitialize Status 0x0
Ok, no more retries required


ATAPI IDE: Look for PCI IDE controller


ATAPI IDE: i 1, BMListLen 1
 Parameter IgnoreIsa
 Parameter IgnoreIsa = 0x0


ATAPI IDE: Look for ISA Controllers
AtapiFindController:
  assume max PIO4
allocate 2 Luns for 1 channels
AtapiSetupLunPtrs for channel 0 of 1, 2 luns 
  Chan 0xb0b64568
  Lun 0x0
  Lun ptr 0xb0ddf008
  Lun 0x1
  Lun ptr 0xb0ddf310
AtapiReadChipConfig: devExt 0xb0b64cec
AtapiReadChipConfig: dev 0xffffffff, ph chan -1
 Parameter ForceSimplex
 Parameter ForceSimplex = 0x0
MaxTransferMode (base): 0xc
 Parameter MaxTransferMode
 Parameter MaxTransferMode = 0xc
MaxTransferMode (overriden): 0xc
 Parameter Force80pin
 Parameter Force80pin = 0x0
 Parameter AtapiDmaZeroTransfer
 Parameter AtapiDmaZeroTransfer = 0x0
 Parameter AtapiDmaControlCmd
 Parameter AtapiDmaControlCmd = 0x0
 Parameter AtapiDmaRawRead
 Parameter AtapiDmaRawRead = 0x1
 Parameter AtapiDmaReadWrite
 Parameter AtapiDmaReadWrite = 0x1
AtapiChipInit: dev 0xffffffff, ph chan -1, c -1
HwFlags: 0x0
VendorID/DeviceID/Rev 0x0/0x0/0x0
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
AtapiFindController: AtdiskPrimaryClaimed
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
AtapiFindController: AtdiskSecondaryClaimed
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=1e8
  BaseIoAddress2=3ee
  expected InterruptLevel=b
  AltStatus (0xff)
  Reg_0x1 (0x1e9) = 0xff
  Reg_0x2 (0x1ea) = 0xff
  Reg_0x3 (0x1eb) = 0xff
  Reg_0x4 (0x1ec) = 0xff
  Reg_0x5 (0x1ed) = 0xff
  Reg_0x6 (0x1ee) = 0xff
  Reg_0x7 (0x1ef) = 0xff
AtapiFindController: Identifier read back from Master (0xff)
AtapiFindController: Identifier read back from Slave (0xff)
 Parameter PortBase
 Parameter PortBase = 0x0
 Parameter Irq
 Parameter Irq = 0x0
  BaseIoAddress1=168
  BaseIoAddress2=36e
  expected InterruptLevel=a
  AltStatus (0xff)
  Reg_0x1 (0x169) = 0xff
  Reg_0x2 (0x16a) = 0xff
  Reg_0x3 (0x16b) = 0xff
  Reg_0x4 (0x16c) = 0xff
  Reg_0x5 (0x16d) = 0xff
  Reg_0x6 (0x16e) = 0xff
  Reg_0x7 (0x16f) = 0xff
AtapiFindController: Identifier read back from Master (0xff)
AtapiFindController: Identifier read back from Slave (0xff)
AtapiFindController: return SP_RETURN_NOT_FOUND
ScsiPortInitialize Status 0xc00000c0
 Parameter IgnoreMca
 Parameter IgnoreMca = 0x0


ATAPI IDE: Look for MCA Controllers
ScsiPortInitialize Status 0xc00000c0


Leave UNIATA MiniPort DriverEntry with status 0x0
(../../ntoskrnl/io/iomgr/driver.c:1629) '\Driver\buslogic' initialization failed, status (0xc00000c0)
(../../ntoskrnl/io/iomgr/driver.c:64) Deleting driver object '\Driver\buslogic'
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a0360, CDB 0xf78a0390, AtaReq 0xb0b65000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf78a0360
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send 25
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 25 (Cdb f78a0390)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 25
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f78a0390 Command 0x25 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f78a0360
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf782c510, srb->DataBuffer 0xf782c510
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf782c518, srb->DataBuffer 0xf782c510, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf78a0360, status 1
AtapiInterrupt: RequestComplete, srb 0xf78a0360
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a0364, CDB 0xf78a0394, AtaReq 0xb0b65000, SCmd 0xbd
UniataNeedQueueing: TopLevel, qd=0
Send to device bd
TopLevel (2), srb 0xf78a0364
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send bd
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD bd (Cdb f78a0394)
  assume IN
AtapiSendCommand: use_dma=0, Cmd bd
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f78a0394 Command 0xbd to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f78a0364
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x4
IdeIntr: Read 0x4 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf782c510, srb->DataBuffer 0xf782c510
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf782c518, srb->DataBuffer 0xf782c510, len 0x8
   Transfered 8, full size 8
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf78a0364, status 1
AtapiInterrupt: RequestComplete, srb 0xf78a0364
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a03ec, CDB 0xf78a041c, AtaReq 0xb0b65000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf78a03ec
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send 1a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 1a (Cdb f78a041c)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 1a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f78a041c Command 0x1a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f78a03ec
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x51
  base status 0x51
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x51)
AtapiInterrupt: iReason 3
AtapiInterrupt: Error 0x51
  Bad Lba 0x0
  wait 10 ready after ATAPI error
  Intr on DRQ 0
AtapiInterrupt: ATAPI Error, int reason 3
Errors in PIO mode
AtapiInterrupt: Error
AtapiInterrupt: CompleteRequest, srbstatus 4
AtapiInterrupt: Error. Begin mapping...
MapError: Error register is 0x51
ATAPI: Illegal request
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft a
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf78a03ec, status 4
AtapiInterrupt: RequestComplete, srb 0xf78a03ec
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf618, CDB 0xb0ddf648, AtaReq 0xb0b65000, SCmd 0x3
UniataNeedQueueing: TopLevel, qd=0
Send to device 3
TopLevel (2), srb 0xb0ddf618
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send 3
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 3 (Cdb b0ddf648)
  assume IN
AtapiSendCommand: SCSIOP_REQUEST_SENSE, no DMA setup
AtapiSendCommand: use_dma=0, Cmd 3
AtapiSendCommand: SCSIOP_REQUEST_SENSE -> no dma setup (2)
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb b0ddf648 Command 0x3 to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x51
  continue with SCSIOP_REQUEST_SENSE
AtapiSendCommand: Entry Status (0x51)
AtapiSendCommand: Poll for int. to send packet. Status (0x51)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb b0ddf618
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 3)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x9
IdeIntr: Read 0x9 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf782bc50, srb->DataBuffer 0xf782bc50
70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 
00 00 
  status re-check 0x50
AtapiInterrupt: all transferred, AtaReq->WordsLeft == 0
AtapiInterrupt: early complete ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf782bc62, srb->DataBuffer 0xf782bc50, len 0x12
   Transfered 12, full size 12
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xb0ddf618, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf618
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a03ec, CDB 0xf78a041c, AtaReq 0xb0b65000, SCmd 0x5a
UniataNeedQueueing: TopLevel, qd=0
Send to device 5a
TopLevel (2), srb 0xf78a03ec
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send 5a
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD 5a (Cdb f78a041c)
  assume IN
AtapiSendCommand: use_dma=0, Cmd 5a
AtapiSendCommand: AtapiDmaReinit()
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f78a041c Command 0x5a to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f78a03ec
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x58
  base status 0x58
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x58)
AtapiInterrupt: iReason 2
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 2
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: get R wordCount 0x8
AtapiInterrupt: 12 words requested; 8 words xferred
IdeIntr: Read 0x8 words
IdeIntr: PIO Read AtaReq->DataBuffer 0xf782c538, srb->DataBuffer 0xf782c538
  status re-check 0x50
AtapiInterrupt: early complete + underrun ? status 50
AtapiInterrupt: CompleteRequest, srbstatus 1
WordsLeft 0x4 -> SRB_STATUS_DATA_OVERRUN
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0xf782c548, srb->DataBuffer 0xf782c538, len 0x18
AtapiInterrupt: Check for underflow, AtaReq->WordsLeft 4
AtapiInterrupt: RequestComplete
AtapiInterrupt: remove srb 0xf78a03ec, status 12
AtapiInterrupt: RequestComplete, srb 0xf78a03ec
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a03ec, CDB 0xf78a041c, AtaReq 0xb0b65000, SCmd 0xbe
UniataNeedQueueing: TopLevel, qd=0
Send to device be
TopLevel (2), srb 0xf78a03ec
TopLevel (3), AtaReq 0xb0b65000
Try ATAPI send be
AtapiSendCommand: req state 0x10, Action 3
AtapiSendCommand: prepare..., ATAPI CMD be (Cdb f78a041c)
  assume 0-transfer
AtapiSendCommand: zero transfer, no DMA setup
AtapiSendCommand: use_dma=0, Cmd be
AtapiSendCommand: zero transfer
AtapiSendCommand: AtapiDmaReinit() to PIO
AtapiDmaReinit: !(AtaReq->Flags & REQ_FLAG_DMA_OPERATION), fall to PIO on Device 0
AtapiSendCommand: use_dma=0
AtapiSendCommand: CMD_ACTION_EXEC
AtapiSendCommand: Cdb f78a041c Command 0xbe to TargetId 0 lun 0
AtapiSendCommand: Entered with status 0x50
AtapiSendCommand: Entry Status (0x50)
AtapiSendCommand: Poll for int. to send packet. Status (0x50)
AtapiSendCommand: status (0x58)
AtapiSendCommand: iReason 1
AtapiSendCommand: cmd status (0xd0)
AtapiSendCommand: ExpectingInterrupt (0x1)
AtapiSendCommand: return SRB_STATUS_PENDING (3)
AtapiStartIo: next Srb f78a03ec
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x1, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x50
  base status 0x50
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:1, irql 0xc, c 0
  dev_type ATAPI
  OldReqState = 42
  continue service interrupt
AtapiInterrupt: ATAPI Entered with status (0x50)
AtapiInterrupt: iReason 3
AtapiInterrupt: ATAPI branch
AtapiInterrupt: iReason 3
AtapiInterrupt: i-reason=3, status=0x50
AtapiInterrupt: interruptReason = CompleteRequest
AtapiInterrupt: CompleteRequest, was PIO
AtapiInterrupt: wordCount 0x0, WordsTransfered 0x0
AtapiInterrupt: CompleteRequest, srbstatus 1
AtapiInterrupt: PIO completion
AtapiInterrupt: PIO completion, wait BUSY
IdeIntr: ATAPI Read AtaReq->DataBuffer 0x0, srb->DataBuffer 0x0, len 0x0
   Transfered 0, full size 0
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xf78a03ec, status 1
AtapiInterrupt: RequestComplete, srb 0xf78a03ec
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a029c, CDB 0xf78a02cc, AtaReq 0xb0de4000, SCmd 0x1a
UniataNeedQueueing: TopLevel, qd=0
Send to device 1a
TopLevel (2), srb 0xf78a029c
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78a0010
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_MODE_SENSE PATH:LUN:TID = 0x0:0x0:0x0
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xda, lba 0x0 count 0x0 feature 0x0
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf78a029c complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f78a029c)
AtapiStartIo: UniataRemoveRequest(b0df6278, f78a029c)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 0)
unexpected, 1st chance
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = FALSE
  DMA status 0x4
  perform generic check
  clear unexpected DMA intr
AtapiDmaDone: dev -1
  getting status...
  IDE status 0x51
  base status 0x51
  Unexpected interrupt.
  OurInterrupt = 2
AtapiInterrupt(base): Catch unexpected
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf78a02c0, CDB 0xf78a02f0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf78a02c0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf78a0028
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf78a02c0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f78a02c0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f78a02c0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fef8
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:038d0000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 1)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fe08
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:03b4b000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ff40, CDB 0xf789ff70, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ff40
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fca8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ff40 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ff40)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ff40)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ff20, CDB 0xf789ff50, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ff20
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fc88
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ff20 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ff20)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ff20)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fbc8
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:038cf000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789fd00, CDB 0xf789fd30, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789fd00
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fa68
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789fd00 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789fd00)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789fd00)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789fce0, CDB 0xf789fd10, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789fce0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789fa48
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789fce0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789fce0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789fce0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f988
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:03b4a000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789fac0, CDB 0xf789faf0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789fac0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f828
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789fac0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789fac0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789fac0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789faa0, CDB 0xf789fad0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789faa0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f808
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789faa0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789faa0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789faa0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f748
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:038ce000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f880, CDB 0xf789f8b0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f880
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f5e8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f880 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f880)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f880)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f860, CDB 0xf789f890, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f860
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f5c8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f860 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f860)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f860)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f508
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:03b49000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f640, CDB 0xf789f670, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f640
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f3a8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f640 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f640)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f640)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f620, CDB 0xf789f650, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f620
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f388
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f620 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f620)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f620)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f2c8
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:038cd000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f400, CDB 0xf789f430, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f400
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f168
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f400 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f400)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f400)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f3e0, CDB 0xf789f410, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f3e0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f148
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f3e0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f3e0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f3e0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789f088
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:03b48000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f1c0, CDB 0xf789f1f0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f1c0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ef28
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f1c0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f1c0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f1c0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789f1a0, CDB 0xf789f1d0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789f1a0
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ef08
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789f1a0 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789f1a0)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789f1a0)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ee48
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:038cc000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ef80, CDB 0xf789efb0, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ef80
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ece8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ef80 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ef80)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ef80)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ef60, CDB 0xf789ef90, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ef60
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ecc8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ef60 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ef60)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ef60)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ec08
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1
AtapiDmaSetup: mode 0x44, data f782c000, count 200, lCh 0, dev 0
  get Phys(PRD=b0de4060)
AtapiVirtToPhysAddr_: b0de4060 -> 00000000:03b51060
  get Phys(data[0]=f782c000)
AtapiVirtToPhysAddr_: f782c000 -> 00000000:03b47000
  set TERM
AtapiDmaSetup: OK
AtapiDmaReinit: LimitedTransferMode == TransferMode = 44 (231)
IdeReadWrite: Lba 0x0, Count 0x1(0x0)
AtaCommand48: cntrlr 0x0:0x0 dev 0x0, cmd 0xc8, lba 0x0 count 0x1 feature 0x0
IdeSendCommand: SRB_STATUS_PENDING
IdeSendCommand: REQ_STATE_EXPECTING_INTR
AtapiStartIo: next Srb b0ddf898
AtapiStartIo: query PORT for next request
Intr: VendorID+DeviceID/Rev 0x55131039/0xd0 (ex 2)
AtapiInterrupt(base): cntrlr 0x0 chan 0x0
AtapiInterrupt(base): try lock
AtapiInterrupt(base): locked
AtapiCheckInterrupt__:
  cntrlr 0x0:0x0, lch 0x0 DmaTransfer = TRUE
  perform generic check
  getting status...
  IDE status 0x50
  base status 0x50
AtapiDmaDone: dev -1
AtapiCheckInterrupt__: exit with TRUE
AtapiInterrupt:
  cntrlr 0x0:0, irql 0xd, c 0
  DmaTransfer = TRUE
  dev_type IDE
  OldReqState = 40
AtapiInterrupt: Entered with status (0x50)
AtapiInterrupt: i-reason=2, status=0x58
AtapiInterrupt: CompleteRequest, srbstatus 1
   Transfered 200, full size 200
AtapiInterrupt: RequestComplete
AtapiInterrupt: set AutoSense
AtapiInterrupt: remove srb 0xb0ddf898, status 1
AtapiInterrupt: RequestComplete, srb 0xb0ddf898
AtapiInterrupt: NextRequest, srb=0x0
AtapiInterrupt: ReturnEnableIntr
AtapiInterrupt: exiting, UseDpc=1, NoStartIo=1
AtapiInterrupt(base): return status TRUE
AtapiInterrupt(base): exit with status 0x1
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ed40, CDB 0xf789ed70, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ed40
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789eaa8
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ed40 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ed40)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ed40)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xf789ed20, CDB 0xf789ed50, AtaReq 0xb0de4000, SCmd 0x25
UniataNeedQueueing: TopLevel, qd=0
Send to device 25
TopLevel (2), srb 0xf789ed20
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789ea88
** Ide: Command AtaReq 0xb0de4000
** --- **
** IdeSendCommand: SCSIOP_READ_CAPACITY PATH:LUN:TID = 0x0:0x0:0x0
** IDE disk 0x0 - #sectors 0x3f, #heads 0x10, #cylinders 0x1df7
IdeSendCommand: REQ_STATE_TRANSFER_COMPLETE
AtapiStartIo: Srb 0xf789ed20 complete with status 0x1
AtapiStartIo: AtapiDmaDBSync(b0df6278, f789ed20)
AtapiStartIo: UniataRemoveRequest(b0df6278, f789ed20)
AtapiStartIo: ScsiPortNotification
AtapiStartIo: UniataGetCurRequest
AtapiStartIo: chan b0df6278, Src 0
AtapiStartIo: next Srb 0
AtapiStartIo: query PORT for next request
TopLevel
** AtapiStartIo: Function 0x0, PATH:LUN:TID = 0x0:0x0:0x0
   VendorID+DeviceID/Rev 0x55131039/0xd0
  SRB 0xb0ddf898, CDB 0xb0ddf8c8, AtaReq 0xb0de4000, SCmd 0x28
UniataNeedQueueing: TopLevel, qd=0
Send to device 28
TopLevel (2), srb 0xb0ddf898
TopLevel (3), AtaReq 0xb0de4000
Try IDE send
** Ide: Command: entryway
** Ide: Command:

** Ide: Command &AtaReq 0xf789e9c8
** Ide: Command AtaReq 0xb0de4000
** --- **
IdeSendCommand: SCSIOP_READ PATH:LUN:TID = 0x0:0x0:0x0
IdeReadWrite (Orig REQ): Starting sector 0, OrigWordsRequested 0x100, DevSize 0x1
IdeReadWrite (REQ): Starting sector is 0, Number of WORDS 0x100, DevSize 0x1

*** Fatal System Error: 0x0000007f
                       (0x00000008,0x00000000,0x00000000,0x00000000)


Entered debugger on embedded INT3 at 0x0008:0x8094b768.
kdb:> bt
Eip:
<NTOSKRNL.EXE:14b769 (:0 (RtlpBreakWithStatusInstruction))>
Frames:
<NTOSKRNL.EXE:8cdfd (ntoskrnl/ke/bug.c:1100 (KeBugCheckWithTf))>
<NTOSKRNL.EXE:12feef (ntoskrnl/ke/i386/exp.c:1144 (KiSystemFatalException))>
<NTOSKRNL.EXE:133fa3 (ntoskrnl/ke/i386/traphdlr.c:854 (KiTrap08Handler))>
<NTOSKRNL.EXE:335a (:0 (KiTrap08))>
<NTOSKRNL.EXE:12f57a (ntoskrnl/ke/i386/exp.c:621 (KeTrapFrameToContext))>
<NTOSKRNL.EXE:12f91f (ntoskrnl/ke/i386/exp.c:870 (KiDispatchException))>
<NTOSKRNL.EXE:12feb3 (ntoskrnl/ke/i386/exp.c:1126 (KiDispatchExceptionFromTrapFrame))>
<NTOSKRNL.EXE:132f51 (ntoskrnl/ke/i386/traphdlr.c:229 (KiDebugHandler))>
<NTOSKRNL.EXE:134f61 (ntoskrnl/ke/i386/traphdlr.c:1583 (KiDebugServiceHandler))>
<NTOSKRNL.EXE:3b9d (:0 (KiDebugService))>
<NTOSKRNL.EXE:14b790 (:0 (DebugService))>
<NTOSKRNL.EXE:14b7cc (lib/rtl/debug.c:28 (DebugPrint))>
<NTOSKRNL.EXE:14b99e (lib/rtl/debug.c:138 (vDbgPrintExWithPrefixInternal))>
<NTOSKRNL.EXE:14ba90 (lib/rtl/debug.c:211 (DbgPrint))>
<uniata.sys:18a93>
<uniata.sys:730d>
<uniata.sys:10cbd>
<uniata.sys:1205c>
<uniata.sys:13c08>
<scsiport.sys:33e6>--- Press q to abort, any other key to continue ---

<NTOSKRNL.EXE:1309c3 (ntoskrnl/ke/i386/irqobj.c:596 (KeSynchronizeExecution))>
<scsiport.sys:3ab2>
<NTOSKRNL.EXE:60a56 (ntoskrnl/io/iomgr/device.c:1676 (IoStartPacket))>
<scsiport.sys:7f21>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<class2.sys:45eb>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:56822 (ntoskrnl/fstub/disksup.c:1295 (xHalExamineMBR))>
<NTOSKRNL.EXE:569db (ntoskrnl/fstub/disksup.c:2291 (HalExamineMBR))>
<NTOSKRNL.EXE:57557 (ntoskrnl/fstub/disksup.c:1408 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>--- Press q to abort, any other key to continue ---

<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>--- Press q to abort, any other key to continue ---

<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>--- Press q to abort, any other key to continue ---

<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2e2a>
<disk.sys:47f0>
<class2.sys:126f>
<NTOSKRNL.EXE:757f4 (ntoskrnl/io/iomgr/irp.c:1221 (IofCallDriver))>
<NTOSKRNL.EXE:55eef (ntoskrnl/fstub/disksup.c:1017 (HalpGetFullGeometry))>
<NTOSKRNL.EXE:575a6 (ntoskrnl/fstub/disksup.c:1418 (xHalIoReadPartitionTable))>
<NTOSKRNL.EXE:57f87 (ntoskrnl/fstub/disksup.c:2307 (IoReadPartitionTable))>
<disk.sys:2855>
<disk.sys:34a8>
<disk.sys:3729>
<class2.sys:1daa>
<disk.sys:152a>
<NTOSKRNL.EXE:642c3 (ntoskrnl/io/iomgr/driver.c:1625 (IopCreateDriver))>
<NTOSKRNL.EXE:64583 (ntoskrnl/io/iomgr/driver.c:511 (IopInitializeDriverModule))>
<NTOSKRNL.EXE:17b917 (ntoskrnl/io/iomgr/driver.c:941 (IopInitializeBuiltinDriver))>
<NTOSKRNL.EXE:17bcb7 (ntoskrnl/io/iomgr/driver.c:1155 (IopInitializeBootDrivers))>
<NTOSKRNL.EXE:17c981 (ntoskrnl/io/iomgr/iomgr.c:547 (IoInitSystem))>--- Press q to abort, any other key to continue ---

<NTOSKRNL.EXE:177f83 (ntoskrnl/ex/init.c:1799 (Phase1InitializationDiscard))>
<NTOSKRNL.EXE:39aca (ntoskrnl/ex/init.c:2010 (Phase1Initialization))>
<NTOSKRNL.EXE:11a554 (ntoskrnl/ps/thread.c:156 (PspSystemThreadStartup))>
<NTOSKRNL.EXE:131359 (ntoskrnl/ke/i386/thrdini.c:78 (KiThreadStartup))>
<NTOSKRNL.EXE:11a51b (ntoskrnl/ps/state.c:565 (NtQueueApcThread))>
<ffffffff>
<NTOSKRNL.EXE:18a068 (ntoskrnl/ke/i386/kiinit.c:679 (KiSystemStartupBootStack))>
<0000000e>
Couldn't access memory at 0x0000E4C0!
kdb:> cont

*** Fatal System Error: 0x0000007f
                       (0x0000000A,0x00000000,0x00000000,0x00000000)


Entered debugger on embedded INT3 at 0x0008:0x8094b768.
kdb:> bt
Eip:
<NTOSKRNL.EXE:14b769 (:0 (RtlpBreakWithStatusInstruction))>
Frames:
<NTOSKRNL.EXE:8cdfd (ntoskrnl/ke/bug.c:1100 (KeBugCheckWithTf))>
<NTOSKRNL.EXE:12feef (ntoskrnl/ke/i386/exp.c:1144 (KiSystemFatalException))>
<NTOSKRNL.EXE:13413f (ntoskrnl/ke/i386/traphdlr.c:882 (KiTrap0AHandler))>
<NTOSKRNL.EXE:3474 (:0 (KiTrap0A))>
<HAL.DLL:55a6 (hal/halx86/generic/portio.c:119 (WRITE_PORT_ULONG))>
<HAL.DLL:5484 (hal/halx86/generic/bios.c:683 (HalpBiosDisplayReset))>
<bootvid.dll:192b>
<NTOSKRNL.EXE:5e01b (ntoskrnl/inbv/inbv.c:516 (InbvResetDisplay))>
<NTOSKRNL.EXE:8c550 (ntoskrnl/ke/bug.c:659 (KiDisplayBlueScreen))>
<NTOSKRNL.EXE:8ce65 (ntoskrnl/ke/bug.c:1140 (KeBugCheckWithTf))>
<NTOSKRNL.EXE:12feef (ntoskrnl/ke/i386/exp.c:1144 (KiSystemFatalException))>
<NTOSKRNL.EXE:133fa3 (ntoskrnl/ke/i386/traphdlr.c:854 (KiTrap08Handler))>
<NTOSKRNL.EXE:335a (:0 (KiTrap08))>
Couldn't access memory at 0x809E8F98!
kdb:> cont

Entered debugger on embedded INT3 at 0x0008:0x8094b768.
kdb:> bt
Eip:
<NTOSKRNL.EXE:14b769 (:0 (RtlpBreakWithStatusInstruction))>
Frames:
<NTOSKRNL.EXE:8cede (ntoskrnl/ke/bug.c:1197 (KeBugCheckWithTf))>
<NTOSKRNL.EXE:12feef (ntoskrnl/ke/i386/exp.c:1144 (KiSystemFatalException))>
<NTOSKRNL.EXE:13413f (ntoskrnl/ke/i386/traphdlr.c:882 (KiTrap0AHandler))>
<NTOSKRNL.EXE:3474 (:0 (KiTrap0A))>
<HAL.DLL:55a6 (hal/halx86/generic/portio.c:119 (WRITE_PORT_ULONG))>
<HAL.DLL:5484 (hal/halx86/generic/bios.c:683 (HalpBiosDisplayReset))>
<bootvid.dll:192b>
<NTOSKRNL.EXE:5e01b (ntoskrnl/inbv/inbv.c:516 (InbvResetDisplay))>
<NTOSKRNL.EXE:8c550 (ntoskrnl/ke/bug.c:659 (KiDisplayBlueScreen))>
<NTOSKRNL.EXE:8ce65 (ntoskrnl/ke/bug.c:1140 (KeBugCheckWithTf))>
<NTOSKRNL.EXE:12feef (ntoskrnl/ke/i386/exp.c:1144 (KiSystemFatalException))>
<NTOSKRNL.EXE:133fa3 (ntoskrnl/ke/i386/traphdlr.c:854 (KiTrap08Handler))>
<NTOSKRNL.EXE:335a (:0 (KiTrap08))>
Couldn't access memory at 0x809E8F98!
kdb:>